2 files changed, 0 insertions, 557 deletions
diff --git a/3rdParty/Boost b/3rdParty/Boost
new file mode 160000
+Subproject 3bbdbc8cf1996f23d9a366da8bac0f97be6ad79
diff --git a/3rdParty/Boost/boost/asio/write_at.hpp b/3rdParty/Boost/boost/asio/write_at.hpp
deleted file mode 100644
index 85efbc2..0000000
--- a/3rdParty/Boost/boost/asio/write_at.hpp
+++ /dev/null
@@ -1,557 +0,0 @@
-//
-// write_at.hpp
-// ~~~~~~~~~~~~
-//
-// Copyright (c) 2003-2008 Christopher M. Kohlhoff (chris at kohlhoff dot com)
-//
-// Distributed under the Boost Software License, Version 1.0. (See accompanying
-// file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt)
-//
-
-#ifndef BOOST_ASIO_WRITE_AT_HPP
-#define BOOST_ASIO_WRITE_AT_HPP
-
-#if defined(_MSC_VER) && (_MSC_VER >= 1200)
-# pragma once
-#endif // defined(_MSC_VER) && (_MSC_VER >= 1200)
-
-#include <boost/asio/detail/push_options.hpp>
-
-#include <boost/asio/detail/push_options.hpp>
-#include <cstddef>
-#include <boost/config.hpp>
-#include <boost/cstdint.hpp>
-#include <boost/asio/detail/pop_options.hpp>
-
-#include <boost/asio/basic_streambuf.hpp>
-#include <boost/asio/error.hpp>
-
-namespace boost {
-namespace asio {
-
-/**
- * @defgroup write_at boost::asio::write_at
- *
- * @brief Write a certain amount of data at a specified offset before returning.
- */
-/*@{*/
-
-/// Write all of the supplied data at the specified offset before returning.
-/**
- * This function is used to write a certain number of bytes of data to a random
- * access device at a specified offset. The call will block until one of the
- * following conditions is true:
- *
- * @li All of the data in the supplied buffers has been written. That is, the
- * bytes transferred is equal to the sum of the buffer sizes.
- *
- * @li An error occurred.
- *
- * This operation is implemented in terms of zero or more calls to the device's
- * write_some_at function.
- *
- * @param d The device to which the data is to be written. The type must support
- * the SyncRandomAccessWriteDevice concept.
- *
- * @param offset The offset at which the data will be written.
- *
- * @param buffers One or more buffers containing the data to be written. The sum
- * of the buffer sizes indicates the maximum number of bytes to write to the
- * device.
- *
- * @returns The number of bytes transferred.
- *
- * @throws boost::system::system_error Thrown on failure.
- *
- * @par Example
- * To write a single data buffer use the @ref buffer function as follows:
- * @code boost::asio::write_at(d, 42, boost::asio::buffer(data, size)); @endcode
- * See the @ref buffer documentation for information on writing multiple
- * buffers in one go, and how to use it with arrays, boost::array or
- * std::vector.
- *
- * @note This overload is equivalent to calling:
- * @code boost::asio::write_at(
- *     d, offset, buffers,
- *     boost::asio::transfer_all()); @endcode
- */
-template <typename SyncRandomAccessWriteDevice, typename ConstBufferSequence>
-std::size_t write_at(SyncRandomAccessWriteDevice& d,
-    boost::uint64_t offset, const ConstBufferSequence& buffers);
-
-/// Write a certain amount of data at a specified offset before returning.
-/**
- * This function is used to write a certain number of bytes of data to a random
- * access device at a specified offset. The call will block until one of the
- * following conditions is true:
- *
- * @li All of the data in the supplied buffers has been written. That is, the
- * bytes transferred is equal to the sum of the buffer sizes.
- *
- * @li The completion_condition function object returns 0.
- *
- * This operation is implemented in terms of zero or more calls to the device's
- * write_some_at function.
- *
- * @param d The device to which the data is to be written. The type must support
- * the SyncRandomAccessWriteDevice concept.
- *
- * @param offset The offset at which the data will be written.
- *
- * @param buffers One or more buffers containing the data to be written. The sum
- * of the buffer sizes indicates the maximum number of bytes to write to the
- * device.
- *
- * @param completion_condition The function object to be called to determine
- * whether the write operation is complete. The signature of the function object
- * must be:
- * @code std::size_t completion_condition(
- *   // Result of latest write_some_at operation.
- *   const boost::system::error_code& error,
- *
- *   // Number of bytes transferred so far.
- *   std::size_t bytes_transferred
- * ); @endcode
- * A return value of 0 indicates that the write operation is complete. A
- * non-zero return value indicates the maximum number of bytes to be written on
- * the next call to the device's write_some_at function.
- *
- * @returns The number of bytes transferred.
- *
- * @throws boost::system::system_error Thrown on failure.
- *
- * @par Example
- * To write a single data buffer use the @ref buffer function as follows:
- * @code boost::asio::write_at(d, 42, boost::asio::buffer(data, size),
- *     boost::asio::transfer_at_least(32)); @endcode
- * See the @ref buffer documentation for information on writing multiple
- * buffers in one go, and how to use it with arrays, boost::array or
- * std::vector.
- */
-template <typename SyncRandomAccessWriteDevice, typename ConstBufferSequence,
-    typename CompletionCondition>
-std::size_t write_at(SyncRandomAccessWriteDevice& d,
-    boost::uint64_t offset, const ConstBufferSequence& buffers,
-    CompletionCondition completion_condition);
-
-/// Write a certain amount of data at a specified offset before returning.
-/**
- * This function is used to write a certain number of bytes of data to a random
- * access device at a specified offset. The call will block until one of the
- * following conditions is true:
- *
- * @li All of the data in the supplied buffers has been written. That is, the
- * bytes transferred is equal to the sum of the buffer sizes.
- *
- * @li The completion_condition function object returns 0.
- *
- * This operation is implemented in terms of zero or more calls to the device's
- * write_some_at function.
- *
- * @param d The device to which the data is to be written. The type must support
- * the SyncRandomAccessWriteDevice concept.
- *
- * @param offset The offset at which the data will be written.
- *
- * @param buffers One or more buffers containing the data to be written. The sum
- * of the buffer sizes indicates the maximum number of bytes to write to the
- * device.
- *
- * @param completion_condition The function object to be called to determine
- * whether the write operation is complete. The signature of the function object
- * must be:
- * @code std::size_t completion_condition(
- *   // Result of latest write_some_at operation.
- *   const boost::system::error_code& error,
- *
- *   // Number of bytes transferred so far.
- *   std::size_t bytes_transferred
- * ); @endcode
- * A return value of 0 indicates that the write operation is complete. A
- * non-zero return value indicates the maximum number of bytes to be written on
- * the next call to the device's write_some_at function.
- *
- * @param ec Set to indicate what error occurred, if any.
- *
- * @returns The number of bytes written. If an error occurs, returns the total
- * number of bytes successfully transferred prior to the error.
- */
-template <typename SyncRandomAccessWriteDevice, typename ConstBufferSequence,
-    typename CompletionCondition>
-std::size_t write_at(SyncRandomAccessWriteDevice& d,
-    boost::uint64_t offset, const ConstBufferSequence& buffers,
-    CompletionCondition completion_condition, boost::system::error_code& ec);
-
-/// Write all of the supplied data at the specified offset before returning.
-/**
- * This function is used to write a certain number of bytes of data to a random
- * access device at a specified offset. The call will block until one of the
- * following conditions is true:
- *
- * @li All of the data in the supplied basic_streambuf has been written.
- *
- * @li An error occurred.
- *
- * This operation is implemented in terms of zero or more calls to the device's
- * write_some_at function.
- *
- * @param d The device to which the data is to be written. The type must support
- * the SyncRandomAccessWriteDevice concept.
- *
- * @param offset The offset at which the data will be written.
- *
- * @param b The basic_streambuf object from which data will be written.
- *
- * @returns The number of bytes transferred.
- *
- * @throws boost::system::system_error Thrown on failure.
- *
- * @note This overload is equivalent to calling:
- * @code boost::asio::write_at(
- *     d, 42, b,
- *     boost::asio::transfer_all()); @endcode
- */
-template <typename SyncRandomAccessWriteDevice, typename Allocator>
-std::size_t write_at(SyncRandomAccessWriteDevice& d,
-    boost::uint64_t offset, basic_streambuf<Allocator>& b);
-
-/// Write a certain amount of data at a specified offset before returning.
-/**
- * This function is used to write a certain number of bytes of data to a random
- * access device at a specified offset. The call will block until one of the
- * following conditions is true:
- *
- * @li All of the data in the supplied basic_streambuf has been written.
- *
- * @li The completion_condition function object returns 0.
- *
- * This operation is implemented in terms of zero or more calls to the device's
- * write_some_at function.
- *
- * @param d The device to which the data is to be written. The type must support
- * the SyncRandomAccessWriteDevice concept.
- *
- * @param offset The offset at which the data will be written.
- *
- * @param b The basic_streambuf object from which data will be written.
- *
- * @param completion_condition The function object to be called to determine
- * whether the write operation is complete. The signature of the function object
- * must be:
- * @code std::size_t completion_condition(
- *   // Result of latest write_some_at operation.
- *   const boost::system::error_code& error,
- *
- *   // Number of bytes transferred so far.
- *   std::size_t bytes_transferred
- * ); @endcode
- * A return value of 0 indicates that the write operation is complete. A
- * non-zero return value indicates the maximum number of bytes to be written on
- * the next call to the device's write_some_at function.
- *
- * @returns The number of bytes transferred.
- *
- * @throws boost::system::system_error Thrown on failure.
- */
-template <typename SyncRandomAccessWriteDevice, typename Allocator,
-    typename CompletionCondition>
-std::size_t write_at(SyncRandomAccessWriteDevice& d, boost::uint64_t offset,
-    basic_streambuf<Allocator>& b, CompletionCondition completion_condition);
-
-/// Write a certain amount of data at a specified offset before returning.
-/**
- * This function is used to write a certain number of bytes of data to a random
- * access device at a specified offset. The call will block until one of the
- * following conditions is true:
- *
- * @li All of the data in the supplied basic_streambuf has been written.
- *
- * @li The completion_condition function object returns 0.
- *
- * This operation is implemented in terms of zero or more calls to the device's
- * write_some_at function.
- *
- * @param d The device to which the data is to be written. The type must support
- * the SyncRandomAccessWriteDevice concept.
- *
- * @param offset The offset at which the data will be written.
- *
- * @param b The basic_streambuf object from which data will be written.
- *
- * @param completion_condition The function object to be called to determine
- * whether the write operation is complete. The signature of the function object
- * must be:
- * @code std::size_t completion_condition(
- *   // Result of latest write_some_at operation.
- *   const boost::system::error_code& error,
- *
- *   // Number of bytes transferred so far.
- *   std::size_t bytes_transferred
- * ); @endcode
- * A return value of 0 indicates that the write operation is complete. A
- * non-zero return value indicates the maximum number of bytes to be written on
- * the next call to the device's write_some_at function.
- *
- * @param ec Set to indicate what error occurred, if any.
- *
- * @returns The number of bytes written. If an error occurs, returns the total
- * number of bytes successfully transferred prior to the error.
- */
-template <typename SyncRandomAccessWriteDevice, typename Allocator,
-    typename CompletionCondition>
-std::size_t write_at(SyncRandomAccessWriteDevice& d, boost::uint64_t offset,
-    basic_streambuf<Allocator>& b, CompletionCondition completion_condition,
-    boost::system::error_code& ec);
-
-/*@}*/
-/**
- * @defgroup async_write_at boost::asio::async_write_at
- *
- * @brief Start an asynchronous operation to write a certain amount of data at
- * the specified offset.
- */
-/*@{*/
-
-/// Start an asynchronous operation to write all of the supplied data at the
-/// specified offset.
-/**
- * This function is used to asynchronously write a certain number of bytes of
- * data to a random access device at a specified offset. The function call
- * always returns immediately. The asynchronous operation will continue until
- * one of the following conditions is true:
- *
- * @li All of the data in the supplied buffers has been written. That is, the
- * bytes transferred is equal to the sum of the buffer sizes.
- *
- * @li An error occurred.
- *
- * This operation is implemented in terms of zero or more calls to the device's
- * async_write_some_at function.
- *
- * @param d The device to which the data is to be written. The type must support
- * the AsyncRandomAccessWriteDevice concept.
- *
- * @param offset The offset at which the data will be written.
- *
- * @param buffers One or more buffers containing the data to be written.
- * Although the buffers object may be copied as necessary, ownership of the
- * underlying memory blocks is retained by the caller, which must guarantee
- * that they remain valid until the handler is called.
- *
- * @param handler The handler to be called when the write operation completes.
- * Copies will be made of the handler as required. The function signature of
- * the handler must be:
- * @code void handler(
- *   // Result of operation.
- *   const boost::system::error_code& error,
- *
- *   // Number of bytes written from the buffers. If an error
- *   // occurred, this will be less than the sum of the buffer sizes.
- *   std::size_t bytes_transferred
- * ); @endcode
- * Regardless of whether the asynchronous operation completes immediately or
- * not, the handler will not be invoked from within this function. Invocation of
- * the handler will be performed in a manner equivalent to using
- * boost::asio::io_service::post().
- *
- * @par Example
- * To write a single data buffer use the @ref buffer function as follows:
- * @code
- * boost::asio::async_write_at(d, 42, boost::asio::buffer(data, size), handler);
- * @endcode
- * See the @ref buffer documentation for information on writing multiple
- * buffers in one go, and how to use it with arrays, boost::array or
- * std::vector.
- */
-template <typename AsyncRandomAccessWriteDevice, typename ConstBufferSequence,
-    typename WriteHandler>
-void async_write_at(AsyncRandomAccessWriteDevice& d, boost::uint64_t offset,
-    const ConstBufferSequence& buffers, WriteHandler handler);
-
-/// Start an asynchronous operation to write a certain amount of data at the
-/// specified offset.
-/**
- * This function is used to asynchronously write a certain number of bytes of
- * data to a random access device at a specified offset. The function call
- * always returns immediately. The asynchronous operation will continue until
- * one of the following conditions is true:
- *
- * @li All of the data in the supplied buffers has been written. That is, the
- * bytes transferred is equal to the sum of the buffer sizes.
- *
- * @li The completion_condition function object returns 0.
- *
- * This operation is implemented in terms of zero or more calls to the device's
- * async_write_some_at function.
- *
- * @param d The device to which the data is to be written. The type must support
- * the AsyncRandomAccessWriteDevice concept.
- *
- * @param offset The offset at which the data will be written.
- *
- * @param buffers One or more buffers containing the data to be written.
- * Although the buffers object may be copied as necessary, ownership of the
- * underlying memory blocks is retained by the caller, which must guarantee
- * that they remain valid until the handler is called.
- *
- * @param completion_condition The function object to be called to determine
- * whether the write operation is complete. The signature of the function object
- * must be:
- * @code std::size_t completion_condition(
- *   // Result of latest async_write_some_at operation.
- *   const boost::system::error_code& error,
- *
- *   // Number of bytes transferred so far.
- *   std::size_t bytes_transferred
- * ); @endcode
- * A return value of 0 indicates that the write operation is complete. A
- * non-zero return value indicates the maximum number of bytes to be written on
- * the next call to the device's async_write_some_at function.
- *
- * @param handler The handler to be called when the write operation completes.
- * Copies will be made of the handler as required. The function signature of the
- * handler must be:
- * @code void handler(
- *   // Result of operation.
- *   const boost::system::error_code& error,
- *
- *   // Number of bytes written from the buffers. If an error
- *   // occurred, this will be less than the sum of the buffer sizes.
- *   std::size_t bytes_transferred
- * ); @endcode
- * Regardless of whether the asynchronous operation completes immediately or
- * not, the handler will not be invoked from within this function. Invocation of
- * the handler will be performed in a manner equivalent to using
- * boost::asio::io_service::post().
- *
- * @par Example
- * To write a single data buffer use the @ref buffer function as follows:
- * @code boost::asio::async_write_at(d, 42,
- *     boost::asio::buffer(data, size),
- *     boost::asio::transfer_at_least(32),
- *     handler); @endcode
- * See the @ref buffer documentation for information on writing multiple
- * buffers in one go, and how to use it with arrays, boost::array or
- * std::vector.
- */
-template <typename AsyncRandomAccessWriteDevice, typename ConstBufferSequence,
-    typename CompletionCondition, typename WriteHandler>
-void async_write_at(AsyncRandomAccessWriteDevice& d,
-    boost::uint64_t offset, const ConstBufferSequence& buffers,
-    CompletionCondition completion_condition, WriteHandler handler);
-
-/// Start an asynchronous operation to write all of the supplied data at the
-/// specified offset.
-/**
- * This function is used to asynchronously write a certain number of bytes of
- * data to a random access device at a specified offset. The function call
- * always returns immediately. The asynchronous operation will continue until
- * one of the following conditions is true:
- *
- * @li All of the data in the supplied basic_streambuf has been written.
- *
- * @li An error occurred.
- *
- * This operation is implemented in terms of zero or more calls to the device's
- * async_write_some_at function.
- *
- * @param d The device to which the data is to be written. The type must support
- * the AsyncRandomAccessWriteDevice concept.
- *
- * @param offset The offset at which the data will be written.
- *
- * @param b A basic_streambuf object from which data will be written. Ownership
- * of the streambuf is retained by the caller, which must guarantee that it
- * remains valid until the handler is called.
- *
- * @param handler The handler to be called when the write operation completes.
- * Copies will be made of the handler as required. The function signature of the
- * handler must be:
- * @code void handler(
- *   // Result of operation.
- *   const boost::system::error_code& error,
- *
- *   // Number of bytes written from the buffers. If an error
- *   // occurred, this will be less than the sum of the buffer sizes.
- *   std::size_t bytes_transferred
- * ); @endcode
- * Regardless of whether the asynchronous operation completes immediately or
- * not, the handler will not be invoked from within this function. Invocation of
- * the handler will be performed in a manner equivalent to using
- * boost::asio::io_service::post().
- */
-template <typename AsyncRandomAccessWriteDevice, typename Allocator,
-    typename WriteHandler>
-void async_write_at(AsyncRandomAccessWriteDevice& d, boost::uint64_t offset,
-    basic_streambuf<Allocator>& b, WriteHandler handler);
-
-/// Start an asynchronous operation to write a certain amount of data at the
-/// specified offset.
-/**
- * This function is used to asynchronously write a certain number of bytes of
- * data to a random access device at a specified offset. The function call
- * always returns immediately. The asynchronous operation will continue until
- * one of the following conditions is true:
- *
- * @li All of the data in the supplied basic_streambuf has been written.
- *
- * @li The completion_condition function object returns 0.
- *
- * This operation is implemented in terms of zero or more calls to the device's
- * async_write_some_at function.
- *
- * @param d The device to which the data is to be written. The type must support
- * the AsyncRandomAccessWriteDevice concept.
- *
- * @param offset The offset at which the data will be written.
- *
- * @param b A basic_streambuf object from which data will be written. Ownership
- * of the streambuf is retained by the caller, which must guarantee that it
- * remains valid until the handler is called.
- *
- * @param completion_condition The function object to be called to determine
- * whether the write operation is complete. The signature of the function object
- * must be:
- * @code std::size_t completion_condition(
- *   // Result of latest async_write_some_at operation.
- *   const boost::system::error_code& error,
- *
- *   // Number of bytes transferred so far.
- *   std::size_t bytes_transferred
- * ); @endcode
- * A return value of 0 indicates that the write operation is complete. A
- * non-zero return value indicates the maximum number of bytes to be written on
- * the next call to the device's async_write_some_at function.
- *
- * @param handler The handler to be called when the write operation completes.
- * Copies will be made of the handler as required. The function signature of the
- * handler must be:
- * @code void handler(
- *   // Result of operation.
- *   const boost::system::error_code& error,
- *
- *   // Number of bytes written from the buffers. If an error
- *   // occurred, this will be less than the sum of the buffer sizes.
- *   std::size_t bytes_transferred
- * ); @endcode
- * Regardless of whether the asynchronous operation completes immediately or
- * not, the handler will not be invoked from within this function. Invocation of
- * the handler will be performed in a manner equivalent to using
- * boost::asio::io_service::post().
- */
-template <typename AsyncRandomAccessWriteDevice, typename Allocator,
-    typename CompletionCondition, typename WriteHandler>
-void async_write_at(AsyncRandomAccessWriteDevice& d, boost::uint64_t offset,
-    basic_streambuf<Allocator>& b, CompletionCondition completion_condition,
-    WriteHandler handler);
-
-/*@}*/
-
-} // namespace asio
-} // namespace boost
-
-#include <boost/asio/impl/write_at.ipp>
-
-#include <boost/asio/detail/pop_options.hpp>
-
-#endif // BOOST_ASIO_WRITE_AT_HPP