Swiftdiff options
Diffstat (limited to '3rdParty/SCons/scons-3.0.1/engine/SCons/Tool/docbook/docbook-xsl-1.76.1/manpages/other.xsl')
| -rw-r--r-- | 3rdParty/SCons/scons-3.0.1/engine/SCons/Tool/docbook/docbook-xsl-1.76.1/manpages/other.xsl | 888 |
1 files changed, 888 insertions, 0 deletions
diff --git a/3rdParty/SCons/scons-3.0.1/engine/SCons/Tool/docbook/docbook-xsl-1.76.1/manpages/other.xsl b/3rdParty/SCons/scons-3.0.1/engine/SCons/Tool/docbook/docbook-xsl-1.76.1/manpages/other.xsl new file mode 100644 index 0000000..5431925 --- /dev/null +++ b/3rdParty/SCons/scons-3.0.1/engine/SCons/Tool/docbook/docbook-xsl-1.76.1/manpages/other.xsl @@ -0,0 +1,888 @@ +<?xml version='1.0'?> +<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" + xmlns:exsl="http://exslt.org/common" + xmlns:ng="http://docbook.org/docbook-ng" + xmlns:db="http://docbook.org/ns/docbook" + xmlns:l="http://docbook.sourceforge.net/xmlns/l10n/1.0" + exclude-result-prefixes="exsl" + version='1.0'> + +<!-- ******************************************************************** + $Id: other.xsl 8865 2010-08-20 18:22:06Z mzjn $ + ******************************************************************** + + This file is part of the XSL DocBook Stylesheet distribution. + See ../README or http://docbook.sf.net/release/xsl/current/ for + copyright and other information. + + ******************************************************************** --> + +<!-- * This file contains named templates related to things other than --> +<!-- * just assembling the actual text of the main text flow of each man --> +<!-- * page. This "other" stuff currently amounts to these steps: --> +<!-- * --> +<!-- * - get contents of the "map" used to convert special characters --> +<!-- * - output boilerplate messages --> +<!-- * - escape backslash, dot, dash, and apostrophe characters --> +<!-- * - convert non-breaking spaces --> +<!-- * - add a comment to top part of roff source of each page --> +<!-- * - make a .TH title line (for controlling page header/footer) --> +<!-- * - set hyphenation, alignment, indent & line-breaking defaults --> +<!-- * - "prepare" the complete man page contents for final output --> +<!-- * - write the actual man file to the filesystem --> +<!-- * - write any "stub" pages to the filesystem --> +<!-- * --> +<!-- * The templates in this file are actually called only once per --> +<!-- * each Refentry; they are just in a separate file for the purpose --> +<!-- * of keeping things modular. --> + +<!-- ==================================================================== --> + +<xsl:preserve-space elements="*"/> + +<xsl:strip-space elements=" +abstract affiliation anchor answer appendix area areaset areaspec +artheader article audiodata audioobject author authorblurb authorgroup +beginpage bibliodiv biblioentry bibliography biblioset blockquote book +bookbiblio bookinfo callout calloutlist caption caution chapter +citerefentry cmdsynopsis co collab colophon colspec confgroup +copyright dedication docinfo editor entrytbl epigraph equation +example figure footnote footnoteref formalpara funcprototype +funcsynopsis glossary glossdef glossdiv glossentry glosslist graphicco +group highlights imagedata imageobject imageobjectco important index +indexdiv indexentry indexterm informalequation informalexample +informalfigure informaltable inlineequation inlinemediaobject +itemizedlist itermset keycombo keywordset legalnotice listitem lot +mediaobject mediaobjectco menuchoice msg msgentry msgexplan msginfo +msgmain msgrel msgset msgsub msgtext note objectinfo +orderedlist othercredit part partintro preface printhistory procedure +programlistingco publisher qandadiv qandaentry qandaset question +refentry reference refmeta refnamediv refsection refsect1 refsect1info refsect2 +refsect2info refsect3 refsect3info refsynopsisdiv refsynopsisdivinfo +revhistory revision row sbr screenco screenshot sect1 sect1info sect2 +sect2info sect3 sect3info sect4 sect4info sect5 sect5info section +sectioninfo seglistitem segmentedlist seriesinfo set setindex setinfo +shortcut sidebar simplelist simplesect spanspec step subject +subjectset substeps synopfragment table tbody textobject tfoot tgroup +thead tip toc tocchap toclevel1 toclevel2 toclevel3 toclevel4 +toclevel5 tocpart varargs variablelist varlistentry videodata +videoobject void warning subjectset + +classsynopsis +constructorsynopsis +destructorsynopsis +fieldsynopsis +methodparam +methodsynopsis +ooclass +ooexception +oointerface +simplemsgentry +manvolnum +"/> + +<!-- ==================================================================== --> +<!-- * Get character map contents --> +<!-- ==================================================================== --> + + <xsl:variable name="man.charmap.contents"> + <xsl:if test="$man.charmap.enabled != 0"> + <xsl:variable name="lang"> + <xsl:call-template name="l10n.language"> + <xsl:with-param name="target" select="//refentry[1]"/> + </xsl:call-template> + </xsl:variable> + <xsl:call-template name="read-character-map"> + <xsl:with-param name="use.subset" select="$man.charmap.use.subset"/> + <xsl:with-param name="subset.profile"> + <xsl:choose> + <xsl:when test="$lang = 'en'"> + <xsl:value-of select="$man.charmap.subset.profile.english"/> + </xsl:when> + <xsl:otherwise> + <xsl:value-of select="$man.charmap.subset.profile"/> + </xsl:otherwise> + </xsl:choose> + </xsl:with-param> + <xsl:with-param name="uri"> + <xsl:choose> + <xsl:when test="$man.charmap.uri != ''"> + <xsl:value-of select="$man.charmap.uri"/> + </xsl:when> + <xsl:otherwise> + <xsl:value-of select="'../manpages/charmap.groff.xsl'"/> + </xsl:otherwise> + </xsl:choose> + </xsl:with-param> + </xsl:call-template> + </xsl:if> + </xsl:variable> + +<!-- ==================================================================== --> + +<xsl:template name="root.messages"> + <xsl:param name="refname"/> + <!-- redefine this any way you'd like to output messages --> + <!-- DO NOT OUTPUT ANYTHING FROM THIS TEMPLATE --> + <!-- Example: + <xsl:if test="//foo"> + <xsl:call-template name="log.message"> + <xsl:with-param name="level">Warn</xsl:with-param> + <xsl:with-param name="source" select="$refname"/> + <xsl:with-param name="context-desc"> + <xsl:text>limitation</xsl:text> + </xsl:with-param> + <xsl:with-param name="message"> + <xsl:text>Output for foo element is not yet supported.</xsl:text> + </xsl:with-param> + </xsl:call-template> + </xsl:if> + --> +</xsl:template> + +<!-- ==================================================================== --> +<!-- * Escape roff special chars --> +<!-- ==================================================================== --> + +<!-- ******************************************************************** --> +<!-- * --> +<!-- * The backslash, dot, dash, and apostrophe (\, ., -, ') characters --> +<!-- * have special meaning for roff, so before we do any other --> +<!-- * processing, we must escape those characters where they appear in --> +<!-- * the source content. --> +<!-- * --> +<!-- * Here we also deal with replacing U+00a0 (non-breaking space) with --> +<!-- * its roff equivalent --> +<!-- * --> +<!-- ******************************************************************** --> + +<xsl:template match="//refentry//text()"> + <xsl:call-template name="escape.roff.specials"> + <xsl:with-param name="content"> + <xsl:value-of select="."/> + </xsl:with-param> + </xsl:call-template> +</xsl:template> + +<xsl:template name="escape.roff.specials"> + <xsl:param name="content"/> + <xsl:call-template name="convert.nobreak-space"> + <xsl:with-param name="content"> + <xsl:call-template name="escape.apostrophe"> + <xsl:with-param name="content"> + <xsl:call-template name="escape.dash"> + <xsl:with-param name="content"> + <xsl:call-template name="escape.dot"> + <xsl:with-param name="content"> + <xsl:call-template name="escape.backslash"> + <xsl:with-param name="content" select="$content"/> + </xsl:call-template> + </xsl:with-param> + </xsl:call-template> + </xsl:with-param> + </xsl:call-template> + </xsl:with-param> + </xsl:call-template> + </xsl:with-param> + </xsl:call-template> +</xsl:template> + +<xsl:template name="escape.backslash"> + <xsl:param name="content"/> + <xsl:call-template name="string.subst"> + <xsl:with-param name="string" select="$content"/> + <xsl:with-param name="target">\</xsl:with-param> + <!-- * we use "\e" instead of "\\" because the groff docs say --> + <!-- * that's the correct thing to do; also because testing --> + <!-- * shows that "\\" doesn't always work as expected; for --> + <!-- * example, "\\" within a table seems to mess things up --> + <xsl:with-param name="replacement">\e</xsl:with-param> + </xsl:call-template> +</xsl:template> + +<xsl:template name="escape.dot"> + <xsl:param name="content"/> + <xsl:call-template name="string.subst"> + <xsl:with-param name="string" select="$content"/> + <xsl:with-param name="target">.</xsl:with-param> + <xsl:with-param name="replacement">\&.</xsl:with-param> + </xsl:call-template> +</xsl:template> + +<xsl:template name="escape.dash"> + <xsl:param name="content"/> + <xsl:call-template name="string.subst"> + <xsl:with-param name="string" select="$content"/> + <xsl:with-param name="target">-</xsl:with-param> + <xsl:with-param name="replacement">\-</xsl:with-param> + </xsl:call-template> +</xsl:template> + +<xsl:template name="escape.apostrophe"> + <xsl:param name="content"/> + <xsl:call-template name="string.subst"> + <xsl:with-param name="string" select="$content"/> + <xsl:with-param name="target">'</xsl:with-param> + <xsl:with-param name="replacement">\*(Aq</xsl:with-param> + </xsl:call-template> +</xsl:template> + +<xsl:template name="convert.nobreak-space"> + <xsl:param name="content"/> + <xsl:call-template name="string.subst"> + <xsl:with-param name="string" select="$content"/> + <xsl:with-param name="target"> </xsl:with-param> + <!-- * A no-break space can be written two ways in roff; the --> + <!-- * difference, according to the "Page Motions" node in the --> + <!-- * groff info page, is: --> + <!-- * --> + <!-- * "\ " = --> + <!-- * An unbreakable and unpaddable (i.e. not expanded --> + <!-- * during filling) space. --> + <!-- * --> + <!-- * "\~" = --> + <!-- * An unbreakable space that stretches like a normal --> + <!-- * inter-word space when a line is adjusted." --> + <!-- * --> + <!-- * Unfortunately, roff seems to do some weird things with --> + <!-- * long lines that only have words separated by "\~" --> + <!-- * spaces, so it's safer just to stick with the "\ " space --> + <!-- * --> + <!-- * We append a "\&" to handle the case of a no-break space that --> + <!-- * appears at the end of a line - because later processing will --> + <!-- * cause that space to get eaten otherwise. --> + <xsl:with-param name="replacement">\ \&</xsl:with-param> + </xsl:call-template> +</xsl:template> + +<!-- ==================================================================== --> + +<!-- * top.comment generates a comment containing metadata for the man --> +<!-- * page; for example, Author, Generator, and Date information --> + + <xsl:template name="top.comment"> + <xsl:param name="info"/> + <xsl:param name="date"/> + <xsl:param name="title"/> + <xsl:param name="manual"/> + <xsl:param name="source"/> + <xsl:param name="refname"/> + <xsl:text>.\" Title: </xsl:text> + <xsl:call-template name="replace.dots.and.dashes"> + <xsl:with-param name="content" select="$title"/> + </xsl:call-template> + <xsl:text> </xsl:text> + <xsl:text>.\" Author: </xsl:text> + <xsl:call-template name="replace.dots.and.dashes"> + <xsl:with-param name="content"> + <xsl:call-template name="make.roff.metadata.author"> + <xsl:with-param name="info" select="$info"/> + <xsl:with-param name="refname" select="$refname"/> + </xsl:call-template> + </xsl:with-param> + </xsl:call-template> + <xsl:text> </xsl:text> + <xsl:text>.\" Generator: DocBook </xsl:text> + <xsl:value-of select="$DistroTitle"/> + <xsl:text> v</xsl:text> + <xsl:call-template name="replace.dots.and.dashes"> + <xsl:with-param name="content" select="$VERSION"/> + </xsl:call-template> + <xsl:text> <http://docbook.sf.net/></xsl:text> + <xsl:text> </xsl:text> + <xsl:text>.\" Date: </xsl:text> + <xsl:call-template name="replace.dots.and.dashes"> + <xsl:with-param name="content" select="$date"/> + </xsl:call-template> + <xsl:text> </xsl:text> + <xsl:text>.\" Manual: </xsl:text> + <xsl:call-template name="replace.dots.and.dashes"> + <xsl:with-param name="content" select="$manual"/> + </xsl:call-template> + <xsl:text> </xsl:text> + <xsl:text>.\" Source: </xsl:text> + <xsl:call-template name="replace.dots.and.dashes"> + <xsl:with-param name="content" select="$source"/> + </xsl:call-template> + <xsl:text> </xsl:text> + <xsl:text>.\" Language: </xsl:text> + <xsl:call-template name="l10n.language.name"/> + <xsl:text> </xsl:text> + <xsl:text>.\"</xsl:text> + <xsl:text> </xsl:text> + </xsl:template> + +<!-- ==================================================================== --> + + <xsl:template name="TH.title.line"> + + <!-- * The exact way that .TH contents are displayed is system- --> + <!-- * dependent; it varies somewhat between OSes and roff --> + <!-- * versions. Below is a description of how Linux systems with --> + <!-- * a modern groff seem to render .TH contents. --> + <!-- * --> + <!-- * title(section) extra3 title(section) <- page header --> + <!-- * extra2 extra1 title(section) <- page footer--> + <!-- * --> + <!-- * Or, using the names with which the man(7) man page refers --> + <!-- * to the various fields: --> + <!-- * --> + <!-- * title(section) manual title(section) <- page header --> + <!-- * source date title(section) <- page footer--> + <!-- * --> + <!-- * Note that while extra1, extra2, and extra3 are all (nominally) --> + <!-- * optional, in practice almost all pages include an "extra1" --> + <!-- * field, which is, universally, a date (in some form), and it is --> + <!-- * always rendered in the same place (the middle footer position) --> + <!-- * --> + <!-- * Here are a couple of examples of real-world man pages that --> + <!-- * have somewhat useful page headers/footers: --> + <!-- * --> + <!-- * gtk-options(7) GTK+ User's Manual gtk-options(7) --> + <!-- * GTK+ 1.2 2003-10-20 gtk-options(7) --> + <!-- * --> + <!-- * svgalib(7) Svgalib User Manual svgalib(7) --> + <!-- * Svgalib 1.4.1 16 December 1999 svgalib(7) --> + <!-- * --> + <xsl:param name="title"/> + <xsl:param name="section"/> + <xsl:param name="extra1"/> + <xsl:param name="extra2"/> + <xsl:param name="extra3"/> + + <xsl:call-template name="mark.subheading"/> + <!-- * Note that we generate quotes around _every_ field in the --> + <!-- * .TH title line, including the "title" and "section" --> + <!-- * fields. That is because we use the contents of those "as --> + <!-- * is", unchanged from the DocBook source; and DTD-based --> + <!-- * validation does not provide a way to constrain them to be --> + <!-- * "space free" --> + <xsl:text>.TH "</xsl:text> + <xsl:call-template name="string.upper"> + <xsl:with-param name="string"> + <xsl:choose> + <xsl:when test="$man.th.title.max.length != ''"> + <xsl:value-of + select="normalize-space(substring($title, 1, $man.th.title.max.length))"/> + </xsl:when> + <xsl:otherwise> + <xsl:value-of select="normalize-space($title)"/> + </xsl:otherwise> + </xsl:choose> + </xsl:with-param> + </xsl:call-template> + <xsl:text>" "</xsl:text> + <xsl:value-of select="normalize-space($section)"/> + <xsl:text>" "</xsl:text> + <xsl:if test="$man.th.extra1.suppress = 0"> + <!-- * there is no max.length for the extra1 field; the reason --> + <!-- * is, it is almost always a date, and it is not possible --> + <!-- * to truncate dates without changing their meaning --> + <xsl:value-of select="normalize-space($extra1)"/> + </xsl:if> + <xsl:text>" "</xsl:text> + <xsl:if test="$man.th.extra2.suppress = 0"> + <xsl:choose> + <!-- * if max.length is non-empty, use value to truncate field --> + <xsl:when test="$man.th.extra2.max.length != ''"> + <xsl:value-of + select="normalize-space(substring($extra2, 1, $man.th.extra2.max.length))"/> + </xsl:when> + <xsl:otherwise> + <xsl:value-of select="normalize-space($extra2)"/> + </xsl:otherwise> + </xsl:choose> + </xsl:if> + <xsl:text>" "</xsl:text> + <xsl:if test="$man.th.extra3.suppress = 0"> + <xsl:choose> + <!-- * if max.length is non-empty, use value to truncate field --> + <xsl:when test="$man.th.extra3.max.length != ''"> + <xsl:value-of + select="normalize-space(substring($extra3, 1, $man.th.extra3.max.length))"/> + </xsl:when> + <xsl:otherwise> + <xsl:value-of select="normalize-space($extra3)"/> + </xsl:otherwise> + </xsl:choose> + </xsl:if> + <xsl:text>" </xsl:text> + <xsl:call-template name="mark.subheading"/> + </xsl:template> + + <!-- ============================================================== --> + + <xsl:template name="set.default.formatting"> + <!-- * Set default hyphenation, justification, indentation and --> + <!-- * line-breaking --> + <!-- * --> + <!-- * If the value of man.hypenate is zero (the default), then --> + <!-- * disable hyphenation (".nh" = "no hyphenation") --> + <xsl:text>.\" ----------------------------------------------------------------- </xsl:text> + <xsl:text>.\" * set default formatting </xsl:text> + <xsl:text>.\" ----------------------------------------------------------------- </xsl:text> + <xsl:if test="$man.hyphenate = 0"> + <xsl:text>.\" disable hyphenation </xsl:text> + <xsl:text>.nh </xsl:text> + </xsl:if> + <!-- * If the value of man.justify is zero (the default), then --> + <!-- * disable justification (".ad l" means "adjust to left only") --> + <xsl:if test="$man.justify = 0"> + <xsl:text>.\" disable justification</xsl:text> + <xsl:text> (adjust text to left margin only) </xsl:text> + <xsl:text>.ad l </xsl:text> + </xsl:if> + <xsl:if test="not($man.indent.refsect = 0)"> + <xsl:text>.\" store initial "default indentation value" </xsl:text> + <xsl:text>.nr zq \n(IN </xsl:text> + <xsl:text>.\" adjust default indentation </xsl:text> + <xsl:text>.nr IN </xsl:text> + <xsl:value-of select="$man.indent.width"/> + <xsl:text> </xsl:text> + <xsl:text>.\" adjust indentation of SS headings </xsl:text> + <xsl:text>.nr SN \n(IN </xsl:text> + </xsl:if> + <!-- * Unless the value of man.break.after.slash is zero (the --> + <!-- * default), tell groff that it is OK to break a line --> + <!-- * after a slash when needed. --> + <xsl:if test="$man.break.after.slash != 0"> + <xsl:text>.\" enable line breaks after slashes </xsl:text> + <xsl:text>.cflags 4 / </xsl:text> + </xsl:if> + </xsl:template> + + <!-- ================================================================== --> + + <!-- * The prepare.manpage.contents template is called after all --> + <!-- * other processing has been done, before serializing the --> + <!-- * result of all the other processing. It basically works on --> + <!-- * the result as one big string. --> + <xsl:template name="prepare.manpage.contents"> + <xsl:param name="content" select="''"/> + + <!-- * If user has provided a "local" string-substitution map to --> + <!-- * be applied /before/ the standard string-substitution map, --> + <!-- * apply it. --> + <xsl:variable name="pre.adjusted.content"> + <xsl:choose> + <xsl:when test="$man.string.subst.map.local.pre"> + <!-- * normalized value of man.string.subst.map.local.pre --> + <!-- * is non-empty, so get contents of map and apply them --> + <xsl:call-template name="apply-string-subst-map"> + <xsl:with-param name="content" select="$content"/> + <xsl:with-param name="map.contents" + select="exsl:node-set($man.string.subst.map.local.pre)/*"/> + </xsl:call-template> + </xsl:when> + <xsl:otherwise> + <!-- * value of man.string.subst.map.local.pre is empty, --> + <!-- * so just copy original contents --> + <xsl:value-of select="$content"/> + </xsl:otherwise> + </xsl:choose> + </xsl:variable> + + <!-- * Apply standard string-substitution map. The main purpose --> + <!-- * of this map is to escape certain characters that have --> + <!-- * special meaning in roff, and to replace certain characters --> + <!-- * used within the stylesheet internally to represent roff --> + <!-- * markup characters. --> + <xsl:variable name="adjusted.content"> + <xsl:call-template name="apply-string-subst-map"> + <xsl:with-param name="content" select="$pre.adjusted.content"/> + <xsl:with-param name="map.contents" + select="exsl:node-set($man.string.subst.map)/*"/> + </xsl:call-template> + </xsl:variable> + + <!-- * If user has provided a "local" string-substitution map to --> + <!-- * be applied /after/ the standard string-substitution map, --> + <!-- * apply it. --> + <xsl:variable name="post.adjusted.content"> + <xsl:choose> + <xsl:when test="$man.string.subst.map.local.post"> + <!-- * normalized value of man.string.subst.map.local.post --> + <!-- * is non-empty, so get contents of map and apply them --> + <xsl:call-template name="apply-string-subst-map"> + <xsl:with-param name="content" select="$adjusted.content"/> + <xsl:with-param name="map.contents" + select="exsl:node-set($man.string.subst.map.local.post)/*"/> + </xsl:call-template> + </xsl:when> + <xsl:otherwise> + <!-- * value of man.string.subst.map.local.post is empty, --> + <!-- * so just copy original contents --> + <xsl:value-of select="$adjusted.content"/> + </xsl:otherwise> + </xsl:choose> + </xsl:variable> + + <!-- * Optionally, apply a character map to replace Unicode --> + <!-- * symbols and special characters. --> + <xsl:choose> + <xsl:when test="$man.charmap.enabled != 0"> + <xsl:call-template name="apply-character-map"> + <xsl:with-param name="content" select="$post.adjusted.content"/> + <xsl:with-param name="map.contents" + select="exsl:node-set($man.charmap.contents)/*"/> + </xsl:call-template> + </xsl:when> + <xsl:otherwise> + <!-- * if we reach here, value of $man.charmap.enabled is zero, --> + <!-- * so we just pass the adjusted contents through "as is" --> + <xsl:value-of select="$adjusted.content"/> + </xsl:otherwise> + </xsl:choose> + </xsl:template> + + <!-- ================================================================== --> + + <xsl:template name="write.man.file"> + <xsl:param name="name"/> + <xsl:param name="section"/> + <xsl:param name="lang"/> + <xsl:param name="content"/> + <xsl:param name="filename"> + <xsl:call-template name="make.adjusted.man.filename"> + <xsl:with-param name="name" select="$name"/> + <xsl:with-param name="section" select="$section"/> + <xsl:with-param name="lang" select="$lang"/> + </xsl:call-template> + </xsl:param> + <xsl:call-template name="write.text.chunk"> + <xsl:with-param name="filename" select="$filename"/> + <xsl:with-param name="suppress-context-node-name" select="1"/> + <xsl:with-param name="quiet" select="$man.output.quietly"/> + <xsl:with-param + name="message-prolog" + >Note: </xsl:with-param> + <xsl:with-param name="encoding" select="$man.output.encoding"/> + <xsl:with-param name="content" select="$content"/> + </xsl:call-template> + </xsl:template> + + <!-- ============================================================== --> + + <!-- * A "stub" is sort of alias for another file, intended to be read --> + <!-- * and expanded by soelim(1); it's simply a file whose complete --> + <!-- * contents are just a single line of the following form: --> + <!-- * --> + <!-- * .so manX/realname.X --> + <!-- * --> + <!-- * "realname" is a name of another man-page file. That .so line is --> + <!-- * basically a roff "include" statement. When the man command finds --> + <!-- * it, it calls soelim(1) and includes and displays the contents of --> + <!-- * the manX/realqname.X file. --> + <!-- * --> + <!-- * If a refentry has multiple refnames, we generate a "stub" page for --> + <!-- * each refname found, except for the first one. --> + <xsl:template name="write.stubs"> + <xsl:param name="first.refname"/> + <xsl:param name="section"/> + <xsl:param name="lang"/> + <xsl:for-each select="refnamediv/refname"> + <xsl:if test=". != $first.refname"> + <xsl:call-template name="write.text.chunk"> + <xsl:with-param name="filename"> + <xsl:call-template name="make.adjusted.man.filename"> + <xsl:with-param name="name" select="."/> + <xsl:with-param name="section" select="$section"/> + <xsl:with-param name="lang" select="$lang"/> + </xsl:call-template> + </xsl:with-param> + <xsl:with-param name="quiet" select="$man.output.quietly"/> + <xsl:with-param name="suppress-context-node-name" select="1"/> + <xsl:with-param name="message-prolog">Note: </xsl:with-param> + <xsl:with-param name="message-epilog"> (soelim stub)</xsl:with-param> + <xsl:with-param name="content"> + <xsl:value-of select="'.so '"/> + <xsl:call-template name="make.adjusted.man.filename"> + <xsl:with-param name="name" select="$first.refname"/> + <xsl:with-param name="section" select="$section"/> + <xsl:with-param name="lang" select="$lang"/> + </xsl:call-template> + <xsl:text> </xsl:text> + </xsl:with-param> + </xsl:call-template> + </xsl:if> + </xsl:for-each> + </xsl:template> + + <!-- ============================================================== --> + + <!-- * A manifest file is useful for doing "make clean" during --> + <!-- * builds and for other purposes. When we make the manifest --> + <!-- * file, we need to include in it a filename for each man-page --> + <!-- * generated, including any "stub" pages. --> + <xsl:template name="generate.manifest"> + <xsl:variable name="filelist"> + <xsl:for-each select="//refentry"> + <!-- * all refname instances in a Refentry inherit their section --> + <!-- * numbers from the parent Refentry; so we only need to get --> + <!-- * the section once per Refentry, not once per Refname --> + <xsl:variable name="section"> + <xsl:call-template name="get.refentry.section"> + <xsl:with-param name="quiet" select="1"/> + </xsl:call-template> + </xsl:variable> + <xsl:variable name="lang"> + <xsl:call-template name="l10n.language"/> + </xsl:variable> + <xsl:for-each select="refnamediv/refname"> + <xsl:call-template name="make.adjusted.man.filename"> + <xsl:with-param name="name" select="."/> + <xsl:with-param name="section" select="$section"/> + <xsl:with-param name="lang" select="$lang"/> + </xsl:call-template> + <xsl:text> </xsl:text> + </xsl:for-each> + </xsl:for-each> + </xsl:variable> + + <!-- * we write the manifest file once per document, not once per --> + <!-- * Refentry --> + <xsl:call-template name="write.text.chunk"> + <xsl:with-param name="filename"> + <xsl:value-of select="$man.output.manifest.filename"/> + </xsl:with-param> + <xsl:with-param name="quiet" select="1"/> + <xsl:with-param name="message-prolog">Note: </xsl:with-param> + <xsl:with-param name="message-epilog"> (manifest file)</xsl:with-param> + <xsl:with-param name="content"> + <xsl:value-of select="$filelist"/> + </xsl:with-param> + </xsl:call-template> + <xsl:if test="$man.output.quietly = 0"> + <xsl:message><xsl:text> </xsl:text></xsl:message> + </xsl:if> + </xsl:template> + + <!-- ============================================================== --> + + <!-- There is some stuff, that is not portable between groff/troff. --> + <xsl:template name="define.portability.macros"> + <xsl:text>.\" ----------------------------------------------------------------- </xsl:text> + <xsl:text>.\" * Define some portability stuff </xsl:text> + <xsl:text>.\" ----------------------------------------------------------------- </xsl:text> + <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text> + <xsl:text>.\" http://bugs.debian.org/507673 </xsl:text> + <xsl:text>.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html </xsl:text> + <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text> + <xsl:text> </xsl:text> + <xsl:text>.ie \n(.g .ds Aq \(aq</xsl:text> + <xsl:text> </xsl:text> + <xsl:text>.el .ds Aq '</xsl:text> + <xsl:text> </xsl:text> + </xsl:template> + + <!-- ============================================================== --> + + <xsl:template name="define.macros"> + <xsl:text>.\" ----------------------------------------------------------------- </xsl:text> + <xsl:text>.\" * (re)Define some macros </xsl:text> + <xsl:text>.\" ----------------------------------------------------------------- </xsl:text> + <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text> + <xsl:text>.\" toupper - uppercase a string (locale-aware) </xsl:text> + <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text> + <xsl:text>.de toupper </xsl:text> + <xsl:text>.tr</xsl:text> + <xsl:text> </xsl:text> + <xsl:call-template name="make.tr.uppercase.arg"/> + <xsl:text>\\$* </xsl:text> + <xsl:text>.tr</xsl:text> + <xsl:text> </xsl:text> + <xsl:call-template name="make.tr.normalcase.arg"/> + <xsl:text>.. </xsl:text> + <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text> + <xsl:text>.\" SH-xref - format a cross-reference to an SH section </xsl:text> + <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text> + <xsl:text>.de SH-xref +.ie n \{\ +.\} +.toupper \\$* +.el \{\ +\\$* +.\} +.. </xsl:text> + <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text> + <xsl:text>.\" SH - level-one heading that works better for non-TTY output </xsl:text> + <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text> + <xsl:text>.de1 SH </xsl:text> + <xsl:text>.\" put an extra blank line of space above the head in non-TTY output </xsl:text> + <xsl:call-template name="roff-if-start"> + <xsl:with-param name="condition">t</xsl:with-param> + </xsl:call-template> + <xsl:text>.sp 1 </xsl:text> + <xsl:call-template name="roff-if-end"/> + <xsl:text>.sp \\n[PD]u +.nr an-level 1 +.set-an-margin +.nr an-prevailing-indent \\n[IN] +.fi +.in \\n[an-margin]u +.ti 0 +.HTML-TAG ".NH \\n[an-level]" +.it 1 an-trap +.nr an-no-space-flag 1 +.nr an-break-flag 1 +\." make the size of the head bigger +.ps +3 +.ft B +.ne (2v + 1u) +.ie n \{\ +.\" if n (TTY output), use uppercase +.toupper \\$* +.\} +.el \{\ +.nr an-break-flag 0 +.\" if not n (not TTY), use normal case (not uppercase) +\\$1 +.in \\n[an-margin]u +.ti 0 +.\" if not n (not TTY), put a border/line under subheading +.sp -.6 +\l'\n(.lu' +.\} +.. </xsl:text> + <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text> + <xsl:text>.\" SS - level-two heading that works better for non-TTY output </xsl:text> + <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text> + <xsl:text>.de1 SS +.sp \\n[PD]u +.nr an-level 1 +.set-an-margin +.nr an-prevailing-indent \\n[IN] +.fi +.in \\n[IN]u +.ti \\n[SN]u +.it 1 an-trap +.nr an-no-space-flag 1 +.nr an-break-flag 1 +.ps \\n[PS-SS]u +\." make the size of the head bigger +.ps +2 +.ft B +.ne (2v + 1u) +.if \\n[.$] \&\\$* +.. </xsl:text> + <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text> + <xsl:text>.\" BB/EB - put background/screen (filled box) around block of text </xsl:text> + <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text> + <xsl:text>.de BB +.if t \{\ +.sp -.5 +.br +.in +2n +.ll -2n +.gcolor red +.di BX +.\} +.. +.de EB +.if t \{\ +.if "\\$2"adjust-for-leading-newline" \{\ +.sp -1 +.\} +.br +.di +.in +.ll +.gcolor +.nr BW \\n(.lu-\\n(.i +.nr BH \\n(dn+.5v +.ne \\n(BHu+.5v +.ie "\\$2"adjust-for-leading-newline" \{\ +\M[\\$1]\h'1n'\v'+.5v'\D'P \\n(BWu 0 0 \\n(BHu -\\n(BWu 0 0 -\\n(BHu'\M[] +.\} +.el \{\ +\M[\\$1]\h'1n'\v'-.5v'\D'P \\n(BWu 0 0 \\n(BHu -\\n(BWu 0 0 -\\n(BHu'\M[] +.\} +.in 0 +.sp -.5v +.nf +.BX +.in +.sp .5v +.fi +.\} +.. </xsl:text> + <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text> + <xsl:text>.\" BM/EM - put colored marker in margin next to block of text </xsl:text> + <xsl:text>.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ </xsl:text> + <xsl:text>.de BM +.if t \{\ +.br +.ll -2n +.gcolor red +.di BX +.\} +.. +.de EM +.if t \{\ +.br +.di +.ll +.gcolor +.nr BH \\n(dn +.ne \\n(BHu +\M[\\$1]\D'P -.75n 0 0 \\n(BHu -(\\n[.i]u - \\n(INu - .75n) 0 0 -\\n(BHu'\M[] +.in 0 +.nf +.BX +.in +.fi +.\} +.. </xsl:text> +</xsl:template> + +<xsl:template name="make.tr.uppercase.arg"> + <xsl:call-template name="string.shuffle"> + <xsl:with-param name="string1"> + <xsl:call-template name="gentext"> + <xsl:with-param name="key" select="'lowercase.alpha'"/> + </xsl:call-template> + </xsl:with-param> + <xsl:with-param name="string2"> + <xsl:call-template name="gentext"> + <xsl:with-param name="key" select="'uppercase.alpha'"/> + </xsl:call-template> + </xsl:with-param> + </xsl:call-template> + <xsl:text> </xsl:text> +</xsl:template> + +<xsl:template name="make.tr.normalcase.arg"> + <xsl:call-template name="string.shuffle"> + <xsl:with-param name="string1"> + <xsl:call-template name="gentext"> + <xsl:with-param name="key" select="'lowercase.alpha'"/> + </xsl:call-template> + </xsl:with-param> + <xsl:with-param name="string2"> + <xsl:call-template name="gentext"> + <xsl:with-param name="key" select="'lowercase.alpha'"/> + </xsl:call-template> + </xsl:with-param> + </xsl:call-template> + <xsl:text> </xsl:text> +</xsl:template> + +<xsl:template name="string.shuffle"> + <!-- * given two strings, "shuffle" them together into one --> + <xsl:param name="string1"/> + <xsl:param name="string2"/> + <xsl:value-of select="substring($string1, 1, 1)"/> + <xsl:value-of select="substring($string2, 1, 1)"/> + <xsl:if test="string-length($string1) > 1"> + <xsl:call-template name="string.shuffle"> + <xsl:with-param name="string1"> + <xsl:value-of select="substring($string1, 2)"/> + </xsl:with-param> + <xsl:with-param name="string2"> + <xsl:value-of select="substring($string2, 2)"/> + </xsl:with-param> + </xsl:call-template> + </xsl:if> +</xsl:template> + +</xsl:stylesheet> |