summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat (limited to '3rdParty/SQLite/sqlite3.h')
m---------3rdParty/SQLite0
-rw-r--r--3rdParty/SQLite/sqlite3.h5533
2 files changed, 0 insertions, 5533 deletions
diff --git a/3rdParty/SQLite b/3rdParty/SQLite
new file mode 160000
+Subproject e584931ef6a8d644dcb03dddff55a43ef0b4264
diff --git a/3rdParty/SQLite/sqlite3.h b/3rdParty/SQLite/sqlite3.h
deleted file mode 100644
index a411d7e..0000000
--- a/3rdParty/SQLite/sqlite3.h
+++ /dev/null
@@ -1,5533 +0,0 @@
-/*
-** 2001 September 15
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-** This header file defines the interface that the SQLite library
-** presents to client programs. If a C-function, structure, datatype,
-** or constant definition does not appear in this file, then it is
-** not a published API of SQLite, is subject to change without
-** notice, and should not be referenced by programs that use SQLite.
-**
-** Some of the definitions that are in this file are marked as
-** "experimental". Experimental interfaces are normally new
-** features recently added to SQLite. We do not anticipate changes
-** to experimental interfaces but reserve to make minor changes if
-** experience from use "in the wild" suggest such changes are prudent.
-**
-** The official C-language API documentation for SQLite is derived
-** from comments in this file. This file is the authoritative source
-** on how SQLite interfaces are suppose to operate.
-**
-** The name of this file under configuration management is "sqlite.h.in".
-** The makefile makes some minor changes to this file (such as inserting
-** the version number) and changes its name to "sqlite3.h" as
-** part of the build process.
-**
-** @(#) $Id: sqlite.h.in,v 1.447 2009/04/30 15:59:56 drh Exp $
-*/
-#ifndef _SQLITE3_H_
-#define _SQLITE3_H_
-#include <stdarg.h> /* Needed for the definition of va_list */
-
-/*
-** Make sure we can call this stuff from C++.
-*/
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/*
-** Add the ability to override 'extern'
-*/
-#ifndef SQLITE_EXTERN
-# define SQLITE_EXTERN extern
-#endif
-
-/*
-** These no-op macros are used in front of interfaces to mark those
-** interfaces as either deprecated or experimental. New applications
-** should not use deprecated intrfaces - they are support for backwards
-** compatibility only. Application writers should be aware that
-** experimental interfaces are subject to change in point releases.
-**
-** These macros used to resolve to various kinds of compiler magic that
-** would generate warning messages when they were used. But that
-** compiler magic ended up generating such a flurry of bug reports
-** that we have taken it all out and gone back to using simple
-** noop macros.
-*/
-#define SQLITE_DEPRECATED
-#define SQLITE_EXPERIMENTAL
-
-/*
-** Ensure these symbols were not defined by some previous header file.
-*/
-#ifdef SQLITE_VERSION
-# undef SQLITE_VERSION
-#endif
-#ifdef SQLITE_VERSION_NUMBER
-# undef SQLITE_VERSION_NUMBER
-#endif
-
-/*
-** CAPI3REF: Compile-Time Library Version Numbers {H10010} <S60100>
-**
-** The SQLITE_VERSION and SQLITE_VERSION_NUMBER #defines in
-** the sqlite3.h file specify the version of SQLite with which
-** that header file is associated.
-**
-** The "version" of SQLite is a string of the form "X.Y.Z".
-** The phrase "alpha" or "beta" might be appended after the Z.
-** The X value is major version number always 3 in SQLite3.
-** The X value only changes when backwards compatibility is
-** broken and we intend to never break backwards compatibility.
-** The Y value is the minor version number and only changes when
-** there are major feature enhancements that are forwards compatible
-** but not backwards compatible.
-** The Z value is the release number and is incremented with
-** each release but resets back to 0 whenever Y is incremented.
-**
-** See also: [sqlite3_libversion()] and [sqlite3_libversion_number()].
-**
-** Requirements: [H10011] [H10014]
-*/
-#define SQLITE_VERSION "3.6.14.2"
-#define SQLITE_VERSION_NUMBER 3006014
-
-/*
-** CAPI3REF: Run-Time Library Version Numbers {H10020} <S60100>
-** KEYWORDS: sqlite3_version
-**
-** These features provide the same information as the [SQLITE_VERSION]
-** and [SQLITE_VERSION_NUMBER] #defines in the header, but are associated
-** with the library instead of the header file. Cautious programmers might
-** include a check in their application to verify that
-** sqlite3_libversion_number() always returns the value
-** [SQLITE_VERSION_NUMBER].
-**
-** The sqlite3_libversion() function returns the same information as is
-** in the sqlite3_version[] string constant. The function is provided
-** for use in DLLs since DLL users usually do not have direct access to string
-** constants within the DLL.
-**
-** Requirements: [H10021] [H10022] [H10023]
-*/
-SQLITE_EXTERN const char sqlite3_version[];
-const char *sqlite3_libversion(void);
-int sqlite3_libversion_number(void);
-
-/*
-** CAPI3REF: Test To See If The Library Is Threadsafe {H10100} <S60100>
-**
-** SQLite can be compiled with or without mutexes. When
-** the [SQLITE_THREADSAFE] C preprocessor macro 1 or 2, mutexes
-** are enabled and SQLite is threadsafe. When the
-** [SQLITE_THREADSAFE] macro is 0,
-** the mutexes are omitted. Without the mutexes, it is not safe
-** to use SQLite concurrently from more than one thread.
-**
-** Enabling mutexes incurs a measurable performance penalty.
-** So if speed is of utmost importance, it makes sense to disable
-** the mutexes. But for maximum safety, mutexes should be enabled.
-** The default behavior is for mutexes to be enabled.
-**
-** This interface can be used by a program to make sure that the
-** version of SQLite that it is linking against was compiled with
-** the desired setting of the [SQLITE_THREADSAFE] macro.
-**
-** This interface only reports on the compile-time mutex setting
-** of the [SQLITE_THREADSAFE] flag. If SQLite is compiled with
-** SQLITE_THREADSAFE=1 then mutexes are enabled by default but
-** can be fully or partially disabled using a call to [sqlite3_config()]
-** with the verbs [SQLITE_CONFIG_SINGLETHREAD], [SQLITE_CONFIG_MULTITHREAD],
-** or [SQLITE_CONFIG_MUTEX]. The return value of this function shows
-** only the default compile-time setting, not any run-time changes
-** to that setting.
-**
-** See the [threading mode] documentation for additional information.
-**
-** Requirements: [H10101] [H10102]
-*/
-int sqlite3_threadsafe(void);
-
-/*
-** CAPI3REF: Database Connection Handle {H12000} <S40200>
-** KEYWORDS: {database connection} {database connections}
-**
-** Each open SQLite database is represented by a pointer to an instance of
-** the opaque structure named "sqlite3". It is useful to think of an sqlite3
-** pointer as an object. The [sqlite3_open()], [sqlite3_open16()], and
-** [sqlite3_open_v2()] interfaces are its constructors, and [sqlite3_close()]
-** is its destructor. There are many other interfaces (such as
-** [sqlite3_prepare_v2()], [sqlite3_create_function()], and
-** [sqlite3_busy_timeout()] to name but three) that are methods on an
-** sqlite3 object.
-*/
-typedef struct sqlite3 sqlite3;
-
-/*
-** CAPI3REF: 64-Bit Integer Types {H10200} <S10110>
-** KEYWORDS: sqlite_int64 sqlite_uint64
-**
-** Because there is no cross-platform way to specify 64-bit integer types
-** SQLite includes typedefs for 64-bit signed and unsigned integers.
-**
-** The sqlite3_int64 and sqlite3_uint64 are the preferred type definitions.
-** The sqlite_int64 and sqlite_uint64 types are supported for backwards
-** compatibility only.
-**
-** Requirements: [H10201] [H10202]
-*/
-#ifdef SQLITE_INT64_TYPE
- typedef SQLITE_INT64_TYPE sqlite_int64;
- typedef unsigned SQLITE_INT64_TYPE sqlite_uint64;
-#elif defined(_MSC_VER) || defined(__BORLANDC__)
- typedef __int64 sqlite_int64;
- typedef unsigned __int64 sqlite_uint64;
-#else
- typedef long long int sqlite_int64;
- typedef unsigned long long int sqlite_uint64;
-#endif
-typedef sqlite_int64 sqlite3_int64;
-typedef sqlite_uint64 sqlite3_uint64;
-
-/*
-** If compiling for a processor that lacks floating point support,
-** substitute integer for floating-point.
-*/
-#ifdef SQLITE_OMIT_FLOATING_POINT
-# define double sqlite3_int64
-#endif
-
-/*
-** CAPI3REF: Closing A Database Connection {H12010} <S30100><S40200>
-**
-** This routine is the destructor for the [sqlite3] object.
-**
-** Applications should [sqlite3_finalize | finalize] all [prepared statements]
-** and [sqlite3_blob_close | close] all [BLOB handles] associated with
-** the [sqlite3] object prior to attempting to close the object.
-** The [sqlite3_next_stmt()] interface can be used to locate all
-** [prepared statements] associated with a [database connection] if desired.
-** Typical code might look like this:
-**
-** <blockquote><pre>
-** sqlite3_stmt *pStmt;
-** while( (pStmt = sqlite3_next_stmt(db, 0))!=0 ){
-** &nbsp; sqlite3_finalize(pStmt);
-** }
-** </pre></blockquote>
-**
-** If [sqlite3_close()] is invoked while a transaction is open,
-** the transaction is automatically rolled back.
-**
-** The C parameter to [sqlite3_close(C)] must be either a NULL
-** pointer or an [sqlite3] object pointer obtained
-** from [sqlite3_open()], [sqlite3_open16()], or
-** [sqlite3_open_v2()], and not previously closed.
-**
-** Requirements:
-** [H12011] [H12012] [H12013] [H12014] [H12015] [H12019]
-*/
-int sqlite3_close(sqlite3 *);
-
-/*
-** The type for a callback function.
-** This is legacy and deprecated. It is included for historical
-** compatibility and is not documented.
-*/
-typedef int (*sqlite3_callback)(void*,int,char**, char**);
-
-/*
-** CAPI3REF: One-Step Query Execution Interface {H12100} <S10000>
-**
-** The sqlite3_exec() interface is a convenient way of running one or more
-** SQL statements without having to write a lot of C code. The UTF-8 encoded
-** SQL statements are passed in as the second parameter to sqlite3_exec().
-** The statements are evaluated one by one until either an error or
-** an interrupt is encountered, or until they are all done. The 3rd parameter
-** is an optional callback that is invoked once for each row of any query
-** results produced by the SQL statements. The 5th parameter tells where
-** to write any error messages.
-**
-** The error message passed back through the 5th parameter is held
-** in memory obtained from [sqlite3_malloc()]. To avoid a memory leak,
-** the calling application should call [sqlite3_free()] on any error
-** message returned through the 5th parameter when it has finished using
-** the error message.
-**
-** If the SQL statement in the 2nd parameter is NULL or an empty string
-** or a string containing only whitespace and comments, then no SQL
-** statements are evaluated and the database is not changed.
-**
-** The sqlite3_exec() interface is implemented in terms of
-** [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()].
-** The sqlite3_exec() routine does nothing to the database that cannot be done
-** by [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()].
-**
-** The first parameter to [sqlite3_exec()] must be an valid and open
-** [database connection].
-**
-** The database connection must not be closed while
-** [sqlite3_exec()] is running.
-**
-** The calling function should use [sqlite3_free()] to free
-** the memory that *errmsg is left pointing at once the error
-** message is no longer needed.
-**
-** The SQL statement text in the 2nd parameter to [sqlite3_exec()]
-** must remain unchanged while [sqlite3_exec()] is running.
-**
-** Requirements:
-** [H12101] [H12102] [H12104] [H12105] [H12107] [H12110] [H12113] [H12116]
-** [H12119] [H12122] [H12125] [H12131] [H12134] [H12137] [H12138]
-*/
-int sqlite3_exec(
- sqlite3*, /* An open database */
- const char *sql, /* SQL to be evaluated */
- int (*callback)(void*,int,char**,char**), /* Callback function */
- void *, /* 1st argument to callback */
- char **errmsg /* Error msg written here */
-);
-
-/*
-** CAPI3REF: Result Codes {H10210} <S10700>
-** KEYWORDS: SQLITE_OK {error code} {error codes}
-** KEYWORDS: {result code} {result codes}
-**
-** Many SQLite functions return an integer result code from the set shown
-** here in order to indicates success or failure.
-**
-** New error codes may be added in future versions of SQLite.
-**
-** See also: [SQLITE_IOERR_READ | extended result codes]
-*/
-#define SQLITE_OK 0 /* Successful result */
-/* beginning-of-error-codes */
-#define SQLITE_ERROR 1 /* SQL error or missing database */
-#define SQLITE_INTERNAL 2 /* Internal logic error in SQLite */
-#define SQLITE_PERM 3 /* Access permission denied */
-#define SQLITE_ABORT 4 /* Callback routine requested an abort */
-#define SQLITE_BUSY 5 /* The database file is locked */
-#define SQLITE_LOCKED 6 /* A table in the database is locked */
-#define SQLITE_NOMEM 7 /* A malloc() failed */
-#define SQLITE_READONLY 8 /* Attempt to write a readonly database */
-#define SQLITE_INTERRUPT 9 /* Operation terminated by sqlite3_interrupt()*/
-#define SQLITE_IOERR 10 /* Some kind of disk I/O error occurred */
-#define SQLITE_CORRUPT 11 /* The database disk image is malformed */
-#define SQLITE_NOTFOUND 12 /* NOT USED. Table or record not found */
-#define SQLITE_FULL 13 /* Insertion failed because database is full */
-#define SQLITE_CANTOPEN 14 /* Unable to open the database file */
-#define SQLITE_PROTOCOL 15 /* NOT USED. Database lock protocol error */
-#define SQLITE_EMPTY 16 /* Database is empty */
-#define SQLITE_SCHEMA 17 /* The database schema changed */
-#define SQLITE_TOOBIG 18 /* String or BLOB exceeds size limit */
-#define SQLITE_CONSTRAINT 19 /* Abort due to constraint violation */
-#define SQLITE_MISMATCH 20 /* Data type mismatch */
-#define SQLITE_MISUSE 21 /* Library used incorrectly */
-#define SQLITE_NOLFS 22 /* Uses OS features not supported on host */
-#define SQLITE_AUTH 23 /* Authorization denied */
-#define SQLITE_FORMAT 24 /* Auxiliary database format error */
-#define SQLITE_RANGE 25 /* 2nd parameter to sqlite3_bind out of range */
-#define SQLITE_NOTADB 26 /* File opened that is not a database file */
-#define SQLITE_ROW 100 /* sqlite3_step() has another row ready */
-#define SQLITE_DONE 101 /* sqlite3_step() has finished executing */
-/* end-of-error-codes */
-
-/*
-** CAPI3REF: Extended Result Codes {H10220} <S10700>
-** KEYWORDS: {extended error code} {extended error codes}
-** KEYWORDS: {extended result code} {extended result codes}
-**
-** In its default configuration, SQLite API routines return one of 26 integer
-** [SQLITE_OK | result codes]. However, experience has shown that many of
-** these result codes are too coarse-grained. They do not provide as
-** much information about problems as programmers might like. In an effort to
-** address this, newer versions of SQLite (version 3.3.8 and later) include
-** support for additional result codes that provide more detailed information
-** about errors. The extended result codes are enabled or disabled
-** on a per database connection basis using the
-** [sqlite3_extended_result_codes()] API.
-**
-** Some of the available extended result codes are listed here.
-** One may expect the number of extended result codes will be expand
-** over time. Software that uses extended result codes should expect
-** to see new result codes in future releases of SQLite.
-**
-** The SQLITE_OK result code will never be extended. It will always
-** be exactly zero.
-*/
-#define SQLITE_IOERR_READ (SQLITE_IOERR | (1<<8))
-#define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR | (2<<8))
-#define SQLITE_IOERR_WRITE (SQLITE_IOERR | (3<<8))
-#define SQLITE_IOERR_FSYNC (SQLITE_IOERR | (4<<8))
-#define SQLITE_IOERR_DIR_FSYNC (SQLITE_IOERR | (5<<8))
-#define SQLITE_IOERR_TRUNCATE (SQLITE_IOERR | (6<<8))
-#define SQLITE_IOERR_FSTAT (SQLITE_IOERR | (7<<8))
-#define SQLITE_IOERR_UNLOCK (SQLITE_IOERR | (8<<8))
-#define SQLITE_IOERR_RDLOCK (SQLITE_IOERR | (9<<8))
-#define SQLITE_IOERR_DELETE (SQLITE_IOERR | (10<<8))
-#define SQLITE_IOERR_BLOCKED (SQLITE_IOERR | (11<<8))
-#define SQLITE_IOERR_NOMEM (SQLITE_IOERR | (12<<8))
-#define SQLITE_IOERR_ACCESS (SQLITE_IOERR | (13<<8))
-#define SQLITE_IOERR_CHECKRESERVEDLOCK (SQLITE_IOERR | (14<<8))
-#define SQLITE_IOERR_LOCK (SQLITE_IOERR | (15<<8))
-#define SQLITE_IOERR_CLOSE (SQLITE_IOERR | (16<<8))
-#define SQLITE_IOERR_DIR_CLOSE (SQLITE_IOERR | (17<<8))
-#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8) )
-
-/*
-** CAPI3REF: Flags For File Open Operations {H10230} <H11120> <H12700>
-**
-** These bit values are intended for use in the
-** 3rd parameter to the [sqlite3_open_v2()] interface and
-** in the 4th parameter to the xOpen method of the
-** [sqlite3_vfs] object.
-*/
-#define SQLITE_OPEN_READONLY 0x00000001
-#define SQLITE_OPEN_READWRITE 0x00000002
-#define SQLITE_OPEN_CREATE 0x00000004
-#define SQLITE_OPEN_DELETEONCLOSE 0x00000008
-#define SQLITE_OPEN_EXCLUSIVE 0x00000010
-#define SQLITE_OPEN_MAIN_DB 0x00000100
-#define SQLITE_OPEN_TEMP_DB 0x00000200
-#define SQLITE_OPEN_TRANSIENT_DB 0x00000400
-#define SQLITE_OPEN_MAIN_JOURNAL 0x00000800
-#define SQLITE_OPEN_TEMP_JOURNAL 0x00001000
-#define SQLITE_OPEN_SUBJOURNAL 0x00002000
-#define SQLITE_OPEN_MASTER_JOURNAL 0x00004000
-#define SQLITE_OPEN_NOMUTEX 0x00008000
-#define SQLITE_OPEN_FULLMUTEX 0x00010000
-
-/*
-** CAPI3REF: Device Characteristics {H10240} <H11120>
-**
-** The xDeviceCapabilities method of the [sqlite3_io_methods]
-** object returns an integer which is a vector of the these
-** bit values expressing I/O characteristics of the mass storage
-** device that holds the file that the [sqlite3_io_methods]
-** refers to.
-**
-** The SQLITE_IOCAP_ATOMIC property means that all writes of
-** any size are atomic. The SQLITE_IOCAP_ATOMICnnn values
-** mean that writes of blocks that are nnn bytes in size and
-** are aligned to an address which is an integer multiple of
-** nnn are atomic. The SQLITE_IOCAP_SAFE_APPEND value means
-** that when data is appended to a file, the data is appended
-** first then the size of the file is extended, never the other
-** way around. The SQLITE_IOCAP_SEQUENTIAL property means that
-** information is written to disk in the same order as calls
-** to xWrite().
-*/
-#define SQLITE_IOCAP_ATOMIC 0x00000001
-#define SQLITE_IOCAP_ATOMIC512 0x00000002
-#define SQLITE_IOCAP_ATOMIC1K 0x00000004
-#define SQLITE_IOCAP_ATOMIC2K 0x00000008
-#define SQLITE_IOCAP_ATOMIC4K 0x00000010
-#define SQLITE_IOCAP_ATOMIC8K 0x00000020
-#define SQLITE_IOCAP_ATOMIC16K 0x00000040
-#define SQLITE_IOCAP_ATOMIC32K 0x00000080
-#define SQLITE_IOCAP_ATOMIC64K 0x00000100
-#define SQLITE_IOCAP_SAFE_APPEND 0x00000200
-#define SQLITE_IOCAP_SEQUENTIAL 0x00000400
-
-/*
-** CAPI3REF: File Locking Levels {H10250} <H11120> <H11310>
-**
-** SQLite uses one of these integer values as the second
-** argument to calls it makes to the xLock() and xUnlock() methods
-** of an [sqlite3_io_methods] object.
-*/
-#define SQLITE_LOCK_NONE 0
-#define SQLITE_LOCK_SHARED 1
-#define SQLITE_LOCK_RESERVED 2
-#define SQLITE_LOCK_PENDING 3
-#define SQLITE_LOCK_EXCLUSIVE 4
-
-/*
-** CAPI3REF: Synchronization Type Flags {H10260} <H11120>
-**
-** When SQLite invokes the xSync() method of an
-** [sqlite3_io_methods] object it uses a combination of
-** these integer values as the second argument.
-**
-** When the SQLITE_SYNC_DATAONLY flag is used, it means that the
-** sync operation only needs to flush data to mass storage. Inode
-** information need not be flushed. If the lower four bits of the flag
-** equal SQLITE_SYNC_NORMAL, that means to use normal fsync() semantics.
-** If the lower four bits equal SQLITE_SYNC_FULL, that means
-** to use Mac OS X style fullsync instead of fsync().
-*/
-#define SQLITE_SYNC_NORMAL 0x00002
-#define SQLITE_SYNC_FULL 0x00003
-#define SQLITE_SYNC_DATAONLY 0x00010
-
-/*
-** CAPI3REF: OS Interface Open File Handle {H11110} <S20110>
-**
-** An [sqlite3_file] object represents an open file in the OS
-** interface layer. Individual OS interface implementations will
-** want to subclass this object by appending additional fields
-** for their own use. The pMethods entry is a pointer to an
-** [sqlite3_io_methods] object that defines methods for performing
-** I/O operations on the open file.
-*/
-typedef struct sqlite3_file sqlite3_file;
-struct sqlite3_file {
- const struct sqlite3_io_methods *pMethods; /* Methods for an open file */
-};
-
-/*
-** CAPI3REF: OS Interface File Virtual Methods Object {H11120} <S20110>
-**
-** Every file opened by the [sqlite3_vfs] xOpen method populates an
-** [sqlite3_file] object (or, more commonly, a subclass of the
-** [sqlite3_file] object) with a pointer to an instance of this object.
-** This object defines the methods used to perform various operations
-** against the open file represented by the [sqlite3_file] object.
-**
-** The flags argument to xSync may be one of [SQLITE_SYNC_NORMAL] or
-** [SQLITE_SYNC_FULL]. The first choice is the normal fsync().
-** The second choice is a Mac OS X style fullsync. The [SQLITE_SYNC_DATAONLY]
-** flag may be ORed in to indicate that only the data of the file
-** and not its inode needs to be synced.
-**
-** The integer values to xLock() and xUnlock() are one of
-** <ul>
-** <li> [SQLITE_LOCK_NONE],
-** <li> [SQLITE_LOCK_SHARED],
-** <li> [SQLITE_LOCK_RESERVED],
-** <li> [SQLITE_LOCK_PENDING], or
-** <li> [SQLITE_LOCK_EXCLUSIVE].
-** </ul>
-** xLock() increases the lock. xUnlock() decreases the lock.
-** The xCheckReservedLock() method checks whether any database connection,
-** either in this process or in some other process, is holding a RESERVED,
-** PENDING, or EXCLUSIVE lock on the file. It returns true
-** if such a lock exists and false otherwise.
-**
-** The xFileControl() method is a generic interface that allows custom
-** VFS implementations to directly control an open file using the
-** [sqlite3_file_control()] interface. The second "op" argument is an
-** integer opcode. The third argument is a generic pointer intended to
-** point to a structure that may contain arguments or space in which to
-** write return values. Potential uses for xFileControl() might be
-** functions to enable blocking locks with timeouts, to change the
-** locking strategy (for example to use dot-file locks), to inquire
-** about the status of a lock, or to break stale locks. The SQLite
-** core reserves all opcodes less than 100 for its own use.
-** A [SQLITE_FCNTL_LOCKSTATE | list of opcodes] less than 100 is available.
-** Applications that define a custom xFileControl method should use opcodes
-** greater than 100 to avoid conflicts.
-**
-** The xSectorSize() method returns the sector size of the
-** device that underlies the file. The sector size is the
-** minimum write that can be performed without disturbing
-** other bytes in the file. The xDeviceCharacteristics()
-** method returns a bit vector describing behaviors of the
-** underlying device:
-**
-** <ul>
-** <li> [SQLITE_IOCAP_ATOMIC]
-** <li> [SQLITE_IOCAP_ATOMIC512]
-** <li> [SQLITE_IOCAP_ATOMIC1K]
-** <li> [SQLITE_IOCAP_ATOMIC2K]
-** <li> [SQLITE_IOCAP_ATOMIC4K]
-** <li> [SQLITE_IOCAP_ATOMIC8K]
-** <li> [SQLITE_IOCAP_ATOMIC16K]
-** <li> [SQLITE_IOCAP_ATOMIC32K]
-** <li> [SQLITE_IOCAP_ATOMIC64K]
-** <li> [SQLITE_IOCAP_SAFE_APPEND]
-** <li> [SQLITE_IOCAP_SEQUENTIAL]
-** </ul>
-**
-** The SQLITE_IOCAP_ATOMIC property means that all writes of
-** any size are atomic. The SQLITE_IOCAP_ATOMICnnn values
-** mean that writes of blocks that are nnn bytes in size and
-** are aligned to an address which is an integer multiple of
-** nnn are atomic. The SQLITE_IOCAP_SAFE_APPEND value means
-** that when data is appended to a file, the data is appended
-** first then the size of the file is extended, never the other
-** way around. The SQLITE_IOCAP_SEQUENTIAL property means that
-** information is written to disk in the same order as calls
-** to xWrite().
-**
-** If xRead() returns SQLITE_IOERR_SHORT_READ it must also fill
-** in the unread portions of the buffer with zeros. A VFS that
-** fails to zero-fill short reads might seem to work. However,
-** failure to zero-fill short reads will eventually lead to
-** database corruption.
-*/
-typedef struct sqlite3_io_methods sqlite3_io_methods;
-struct sqlite3_io_methods {
- int iVersion;
- int (*xClose)(sqlite3_file*);
- int (*xRead)(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst);
- int (*xWrite)(sqlite3_file*, const void*, int iAmt, sqlite3_int64 iOfst);
- int (*xTruncate)(sqlite3_file*, sqlite3_int64 size);
- int (*xSync)(sqlite3_file*, int flags);
- int (*xFileSize)(sqlite3_file*, sqlite3_int64 *pSize);
- int (*xLock)(sqlite3_file*, int);
- int (*xUnlock)(sqlite3_file*, int);
- int (*xCheckReservedLock)(sqlite3_file*, int *pResOut);
- int (*xFileControl)(sqlite3_file*, int op, void *pArg);
- int (*xSectorSize)(sqlite3_file*);
- int (*xDeviceCharacteristics)(sqlite3_file*);
- /* Additional methods may be added in future releases */
-};
-
-/*
-** CAPI3REF: Standard File Control Opcodes {H11310} <S30800>
-**
-** These integer constants are opcodes for the xFileControl method
-** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()]
-** interface.
-**
-** The [SQLITE_FCNTL_LOCKSTATE] opcode is used for debugging. This
-** opcode causes the xFileControl method to write the current state of
-** the lock (one of [SQLITE_LOCK_NONE], [SQLITE_LOCK_SHARED],
-** [SQLITE_LOCK_RESERVED], [SQLITE_LOCK_PENDING], or [SQLITE_LOCK_EXCLUSIVE])
-** into an integer that the pArg argument points to. This capability
-** is used during testing and only needs to be supported when SQLITE_TEST
-** is defined.
-*/
-#define SQLITE_FCNTL_LOCKSTATE 1
-#define SQLITE_GET_LOCKPROXYFILE 2
-#define SQLITE_SET_LOCKPROXYFILE 3
-#define SQLITE_LAST_ERRNO 4
-
-/*
-** CAPI3REF: Mutex Handle {H17110} <S20130>
-**
-** The mutex module within SQLite defines [sqlite3_mutex] to be an
-** abstract type for a mutex object. The SQLite core never looks
-** at the internal representation of an [sqlite3_mutex]. It only
-** deals with pointers to the [sqlite3_mutex] object.
-**
-** Mutexes are created using [sqlite3_mutex_alloc()].
-*/
-typedef struct sqlite3_mutex sqlite3_mutex;
-
-/*
-** CAPI3REF: OS Interface Object {H11140} <S20100>
-**
-** An instance of the sqlite3_vfs object defines the interface between
-** the SQLite core and the underlying operating system. The "vfs"
-** in the name of the object stands for "virtual file system".
-**
-** The value of the iVersion field is initially 1 but may be larger in
-** future versions of SQLite. Additional fields may be appended to this
-** object when the iVersion value is increased. Note that the structure
-** of the sqlite3_vfs object changes in the transaction between
-** SQLite version 3.5.9 and 3.6.0 and yet the iVersion field was not
-** modified.
-**
-** The szOsFile field is the size of the subclassed [sqlite3_file]
-** structure used by this VFS. mxPathname is the maximum length of
-** a pathname in this VFS.
-**
-** Registered sqlite3_vfs objects are kept on a linked list formed by
-** the pNext pointer. The [sqlite3_vfs_register()]
-** and [sqlite3_vfs_unregister()] interfaces manage this list
-** in a thread-safe way. The [sqlite3_vfs_find()] interface
-** searches the list. Neither the application code nor the VFS
-** implementation should use the pNext pointer.
-**
-** The pNext field is the only field in the sqlite3_vfs
-** structure that SQLite will ever modify. SQLite will only access
-** or modify this field while holding a particular static mutex.
-** The application should never modify anything within the sqlite3_vfs
-** object once the object has been registered.
-**
-** The zName field holds the name of the VFS module. The name must
-** be unique across all VFS modules.
-**
-** SQLite will guarantee that the zFilename parameter to xOpen
-** is either a NULL pointer or string obtained
-** from xFullPathname(). SQLite further guarantees that
-** the string will be valid and unchanged until xClose() is
-** called. Because of the previous sentense,
-** the [sqlite3_file] can safely store a pointer to the
-** filename if it needs to remember the filename for some reason.
-** If the zFilename parameter is xOpen is a NULL pointer then xOpen
-** must invite its own temporary name for the file. Whenever the
-** xFilename parameter is NULL it will also be the case that the
-** flags parameter will include [SQLITE_OPEN_DELETEONCLOSE].
-**
-** The flags argument to xOpen() includes all bits set in
-** the flags argument to [sqlite3_open_v2()]. Or if [sqlite3_open()]
-** or [sqlite3_open16()] is used, then flags includes at least
-** [SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE].
-** If xOpen() opens a file read-only then it sets *pOutFlags to
-** include [SQLITE_OPEN_READONLY]. Other bits in *pOutFlags may be set.
-**
-** SQLite will also add one of the following flags to the xOpen()
-** call, depending on the object being opened:
-**
-** <ul>
-** <li> [SQLITE_OPEN_MAIN_DB]
-** <li> [SQLITE_OPEN_MAIN_JOURNAL]
-** <li> [SQLITE_OPEN_TEMP_DB]
-** <li> [SQLITE_OPEN_TEMP_JOURNAL]
-** <li> [SQLITE_OPEN_TRANSIENT_DB]
-** <li> [SQLITE_OPEN_SUBJOURNAL]
-** <li> [SQLITE_OPEN_MASTER_JOURNAL]
-** </ul>
-**
-** The file I/O implementation can use the object type flags to
-** change the way it deals with files. For example, an application
-** that does not care about crash recovery or rollback might make
-** the open of a journal file a no-op. Writes to this journal would
-** also be no-ops, and any attempt to read the journal would return
-** SQLITE_IOERR. Or the implementation might recognize that a database
-** file will be doing page-aligned sector reads and writes in a random
-** order and set up its I/O subsystem accordingly.
-**
-** SQLite might also add one of the following flags to the xOpen method:
-**
-** <ul>
-** <li> [SQLITE_OPEN_DELETEONCLOSE]
-** <li> [SQLITE_OPEN_EXCLUSIVE]
-** </ul>
-**
-** The [SQLITE_OPEN_DELETEONCLOSE] flag means the file should be
-** deleted when it is closed. The [SQLITE_OPEN_DELETEONCLOSE]
-** will be set for TEMP databases, journals and for subjournals.
-**
-** The [SQLITE_OPEN_EXCLUSIVE] flag means the file should be opened
-** for exclusive access. This flag is set for all files except
-** for the main database file.
-**
-** At least szOsFile bytes of memory are allocated by SQLite
-** to hold the [sqlite3_file] structure passed as the third
-** argument to xOpen. The xOpen method does not have to
-** allocate the structure; it should just fill it in.
-**
-** The flags argument to xAccess() may be [SQLITE_ACCESS_EXISTS]
-** to test for the existence of a file, or [SQLITE_ACCESS_READWRITE] to
-** test whether a file is readable and writable, or [SQLITE_ACCESS_READ]
-** to test whether a file is at least readable. The file can be a
-** directory.
-**
-** SQLite will always allocate at least mxPathname+1 bytes for the
-** output buffer xFullPathname. The exact size of the output buffer
-** is also passed as a parameter to both methods. If the output buffer
-** is not large enough, [SQLITE_CANTOPEN] should be returned. Since this is
-** handled as a fatal error by SQLite, vfs implementations should endeavor
-** to prevent this by setting mxPathname to a sufficiently large value.
-**
-** The xRandomness(), xSleep(), and xCurrentTime() interfaces
-** are not strictly a part of the filesystem, but they are
-** included in the VFS structure for completeness.
-** The xRandomness() function attempts to return nBytes bytes
-** of good-quality randomness into zOut. The return value is
-** the actual number of bytes of randomness obtained.
-** The xSleep() method causes the calling thread to sleep for at
-** least the number of microseconds given. The xCurrentTime()
-** method returns a Julian Day Number for the current date and time.
-**
-*/
-typedef struct sqlite3_vfs sqlite3_vfs;
-struct sqlite3_vfs {
- int iVersion; /* Structure version number */
- int szOsFile; /* Size of subclassed sqlite3_file */
- int mxPathname; /* Maximum file pathname length */
- sqlite3_vfs *pNext; /* Next registered VFS */
- const char *zName; /* Name of this virtual file system */
- void *pAppData; /* Pointer to application-specific data */
- int (*xOpen)(sqlite3_vfs*, const char *zName, sqlite3_file*,
- int flags, int *pOutFlags);
- int (*xDelete)(sqlite3_vfs*, const char *zName, int syncDir);
- int (*xAccess)(sqlite3_vfs*, const char *zName, int flags, int *pResOut);
- int (*xFullPathname)(sqlite3_vfs*, const char *zName, int nOut, char *zOut);
- void *(*xDlOpen)(sqlite3_vfs*, const char *zFilename);
- void (*xDlError)(sqlite3_vfs*, int nByte, char *zErrMsg);
- void (*(*xDlSym)(sqlite3_vfs*,void*, const char *zSymbol))(void);
- void (*xDlClose)(sqlite3_vfs*, void*);
- int (*xRandomness)(sqlite3_vfs*, int nByte, char *zOut);
- int (*xSleep)(sqlite3_vfs*, int microseconds);
- int (*xCurrentTime)(sqlite3_vfs*, double*);
- int (*xGetLastError)(sqlite3_vfs*, int, char *);
- /* New fields may be appended in figure versions. The iVersion
- ** value will increment whenever this happens. */
-};
-
-/*
-** CAPI3REF: Flags for the xAccess VFS method {H11190} <H11140>
-**
-** These integer constants can be used as the third parameter to
-** the xAccess method of an [sqlite3_vfs] object. {END} They determine
-** what kind of permissions the xAccess method is looking for.
-** With SQLITE_ACCESS_EXISTS, the xAccess method
-** simply checks whether the file exists.
-** With SQLITE_ACCESS_READWRITE, the xAccess method
-** checks whether the file is both readable and writable.
-** With SQLITE_ACCESS_READ, the xAccess method
-** checks whether the file is readable.
-*/
-#define SQLITE_ACCESS_EXISTS 0
-#define SQLITE_ACCESS_READWRITE 1
-#define SQLITE_ACCESS_READ 2
-
-/*
-** CAPI3REF: Initialize The SQLite Library {H10130} <S20000><S30100>
-**
-** The sqlite3_initialize() routine initializes the
-** SQLite library. The sqlite3_shutdown() routine
-** deallocates any resources that were allocated by sqlite3_initialize().
-**
-** A call to sqlite3_initialize() is an "effective" call if it is
-** the first time sqlite3_initialize() is invoked during the lifetime of
-** the process, or if it is the first time sqlite3_initialize() is invoked
-** following a call to sqlite3_shutdown(). Only an effective call
-** of sqlite3_initialize() does any initialization. All other calls
-** are harmless no-ops.
-**
-** A call to sqlite3_shutdown() is an "effective" call if it is the first
-** call to sqlite3_shutdown() since the last sqlite3_initialize(). Only
-** an effective call to sqlite3_shutdown() does any deinitialization.
-** All other calls to sqlite3_shutdown() are harmless no-ops.
-**
-** Among other things, sqlite3_initialize() shall invoke
-** sqlite3_os_init(). Similarly, sqlite3_shutdown()
-** shall invoke sqlite3_os_end().
-**
-** The sqlite3_initialize() routine returns [SQLITE_OK] on success.
-** If for some reason, sqlite3_initialize() is unable to initialize
-** the library (perhaps it is unable to allocate a needed resource such
-** as a mutex) it returns an [error code] other than [SQLITE_OK].
-**
-** The sqlite3_initialize() routine is called internally by many other
-** SQLite interfaces so that an application usually does not need to
-** invoke sqlite3_initialize() directly. For example, [sqlite3_open()]
-** calls sqlite3_initialize() so the SQLite library will be automatically
-** initialized when [sqlite3_open()] is called if it has not be initialized
-** already. However, if SQLite is compiled with the [SQLITE_OMIT_AUTOINIT]
-** compile-time option, then the automatic calls to sqlite3_initialize()
-** are omitted and the application must call sqlite3_initialize() directly
-** prior to using any other SQLite interface. For maximum portability,
-** it is recommended that applications always invoke sqlite3_initialize()
-** directly prior to using any other SQLite interface. Future releases
-** of SQLite may require this. In other words, the behavior exhibited
-** when SQLite is compiled with [SQLITE_OMIT_AUTOINIT] might become the
-** default behavior in some future release of SQLite.
-**
-** The sqlite3_os_init() routine does operating-system specific
-** initialization of the SQLite library. The sqlite3_os_end()
-** routine undoes the effect of sqlite3_os_init(). Typical tasks
-** performed by these routines include allocation or deallocation
-** of static resources, initialization of global variables,
-** setting up a default [sqlite3_vfs] module, or setting up
-** a default configuration using [sqlite3_config()].
-**
-** The application should never invoke either sqlite3_os_init()
-** or sqlite3_os_end() directly. The application should only invoke
-** sqlite3_initialize() and sqlite3_shutdown(). The sqlite3_os_init()
-** interface is called automatically by sqlite3_initialize() and
-** sqlite3_os_end() is called by sqlite3_shutdown(). Appropriate
-** implementations for sqlite3_os_init() and sqlite3_os_end()
-** are built into SQLite when it is compiled for unix, windows, or os/2.
-** When built for other platforms (using the [SQLITE_OS_OTHER=1] compile-time
-** option) the application must supply a suitable implementation for
-** sqlite3_os_init() and sqlite3_os_end(). An application-supplied
-** implementation of sqlite3_os_init() or sqlite3_os_end()
-** must return [SQLITE_OK] on success and some other [error code] upon
-** failure.
-*/
-int sqlite3_initialize(void);
-int sqlite3_shutdown(void);
-int sqlite3_os_init(void);
-int sqlite3_os_end(void);
-
-/*
-** CAPI3REF: Configuring The SQLite Library {H14100} <S20000><S30200>
-** EXPERIMENTAL
-**
-** The sqlite3_config() interface is used to make global configuration
-** changes to SQLite in order to tune SQLite to the specific needs of
-** the application. The default configuration is recommended for most
-** applications and so this routine is usually not necessary. It is
-** provided to support rare applications with unusual needs.
-**
-** The sqlite3_config() interface is not threadsafe. The application
-** must insure that no other SQLite interfaces are invoked by other
-** threads while sqlite3_config() is running. Furthermore, sqlite3_config()
-** may only be invoked prior to library initialization using
-** [sqlite3_initialize()] or after shutdown by [sqlite3_shutdown()].
-** Note, however, that sqlite3_config() can be called as part of the
-** implementation of an application-defined [sqlite3_os_init()].
-**
-** The first argument to sqlite3_config() is an integer
-** [SQLITE_CONFIG_SINGLETHREAD | configuration option] that determines
-** what property of SQLite is to be configured. Subsequent arguments
-** vary depending on the [SQLITE_CONFIG_SINGLETHREAD | configuration option]
-** in the first argument.
-**
-** When a configuration option is set, sqlite3_config() returns [SQLITE_OK].
-** If the option is unknown or SQLite is unable to set the option
-** then this routine returns a non-zero [error code].
-**
-** Requirements:
-** [H14103] [H14106] [H14120] [H14123] [H14126] [H14129] [H14132] [H14135]
-** [H14138] [H14141] [H14144] [H14147] [H14150] [H14153] [H14156] [H14159]
-** [H14162] [H14165] [H14168]
-*/
-SQLITE_EXPERIMENTAL int sqlite3_config(int, ...);
-
-/*
-** CAPI3REF: Configure database connections {H14200} <S20000>
-** EXPERIMENTAL
-**
-** The sqlite3_db_config() interface is used to make configuration
-** changes to a [database connection]. The interface is similar to
-** [sqlite3_config()] except that the changes apply to a single
-** [database connection] (specified in the first argument). The
-** sqlite3_db_config() interface can only be used immediately after
-** the database connection is created using [sqlite3_open()],
-** [sqlite3_open16()], or [sqlite3_open_v2()].
-**
-** The second argument to sqlite3_db_config(D,V,...) is the
-** configuration verb - an integer code that indicates what
-** aspect of the [database connection] is being configured.
-** The only choice for this value is [SQLITE_DBCONFIG_LOOKASIDE].
-** New verbs are likely to be added in future releases of SQLite.
-** Additional arguments depend on the verb.
-**
-** Requirements:
-** [H14203] [H14206] [H14209] [H14212] [H14215]
-*/
-SQLITE_EXPERIMENTAL int sqlite3_db_config(sqlite3*, int op, ...);
-
-/*
-** CAPI3REF: Memory Allocation Routines {H10155} <S20120>
-** EXPERIMENTAL
-**
-** An instance of this object defines the interface between SQLite
-** and low-level memory allocation routines.
-**
-** This object is used in only one place in the SQLite interface.
-** A pointer to an instance of this object is the argument to
-** [sqlite3_config()] when the configuration option is
-** [SQLITE_CONFIG_MALLOC]. By creating an instance of this object
-** and passing it to [sqlite3_config()] during configuration, an
-** application can specify an alternative memory allocation subsystem
-** for SQLite to use for all of its dynamic memory needs.
-**
-** Note that SQLite comes with a built-in memory allocator that is
-** perfectly adequate for the overwhelming majority of applications
-** and that this object is only useful to a tiny minority of applications
-** with specialized memory allocation requirements. This object is
-** also used during testing of SQLite in order to specify an alternative
-** memory allocator that simulates memory out-of-memory conditions in
-** order to verify that SQLite recovers gracefully from such
-** conditions.
-**
-** The xMalloc, xFree, and xRealloc methods must work like the
-** malloc(), free(), and realloc() functions from the standard library.
-**
-** xSize should return the allocated size of a memory allocation
-** previously obtained from xMalloc or xRealloc. The allocated size
-** is always at least as big as the requested size but may be larger.
-**
-** The xRoundup method returns what would be the allocated size of
-** a memory allocation given a particular requested size. Most memory
-** allocators round up memory allocations at least to the next multiple
-** of 8. Some allocators round up to a larger multiple or to a power of 2.
-**
-** The xInit method initializes the memory allocator. (For example,
-** it might allocate any require mutexes or initialize internal data
-** structures. The xShutdown method is invoked (indirectly) by
-** [sqlite3_shutdown()] and should deallocate any resources acquired
-** by xInit. The pAppData pointer is used as the only parameter to
-** xInit and xShutdown.
-*/
-typedef struct sqlite3_mem_methods sqlite3_mem_methods;
-struct sqlite3_mem_methods {
- void *(*xMalloc)(int); /* Memory allocation function */
- void (*xFree)(void*); /* Free a prior allocation */
- void *(*xRealloc)(void*,int); /* Resize an allocation */
- int (*xSize)(void*); /* Return the size of an allocation */
- int (*xRoundup)(int); /* Round up request size to allocation size */
- int (*xInit)(void*); /* Initialize the memory allocator */
- void (*xShutdown)(void*); /* Deinitialize the memory allocator */
- void *pAppData; /* Argument to xInit() and xShutdown() */
-};
-
-/*
-** CAPI3REF: Configuration Options {H10160} <S20000>
-** EXPERIMENTAL
-**
-** These constants are the available integer configuration options that
-** can be passed as the first argument to the [sqlite3_config()] interface.
-**
-** New configuration options may be added in future releases of SQLite.
-** Existing configuration options might be discontinued. Applications
-** should check the return code from [sqlite3_config()] to make sure that
-** the call worked. The [sqlite3_config()] interface will return a
-** non-zero [error code] if a discontinued or unsupported configuration option
-** is invoked.
-**
-** <dl>
-** <dt>SQLITE_CONFIG_SINGLETHREAD</dt>
-** <dd>There are no arguments to this option. This option disables
-** all mutexing and puts SQLite into a mode where it can only be used
-** by a single thread.</dd>
-**
-** <dt>SQLITE_CONFIG_MULTITHREAD</dt>
-** <dd>There are no arguments to this option. This option disables
-** mutexing on [database connection] and [prepared statement] objects.
-** The application is responsible for serializing access to
-** [database connections] and [prepared statements]. But other mutexes
-** are enabled so that SQLite will be safe to use in a multi-threaded
-** environment as long as no two threads attempt to use the same
-** [database connection] at the same time. See the [threading mode]
-** documentation for additional information.</dd>
-**
-** <dt>SQLITE_CONFIG_SERIALIZED</dt>
-** <dd>There are no arguments to this option. This option enables
-** all mutexes including the recursive
-** mutexes on [database connection] and [prepared statement] objects.
-** In this mode (which is the default when SQLite is compiled with
-** [SQLITE_THREADSAFE=1]) the SQLite library will itself serialize access
-** to [database connections] and [prepared statements] so that the
-** application is free to use the same [database connection] or the
-** same [prepared statement] in different threads at the same time.
-** See the [threading mode] documentation for additional information.</dd>
-**
-** <dt>SQLITE_CONFIG_MALLOC</dt>
-** <dd>This option takes a single argument which is a pointer to an
-** instance of the [sqlite3_mem_methods] structure. The argument specifies
-** alternative low-level memory allocation routines to be used in place of
-** the memory allocation routines built into SQLite.</dd>
-**
-** <dt>SQLITE_CONFIG_GETMALLOC</dt>
-** <dd>This option takes a single argument which is a pointer to an
-** instance of the [sqlite3_mem_methods] structure. The [sqlite3_mem_methods]
-** structure is filled with the currently defined memory allocation routines.
-** This option can be used to overload the default memory allocation
-** routines with a wrapper that simulations memory allocation failure or
-** tracks memory usage, for example.</dd>
-**
-** <dt>SQLITE_CONFIG_MEMSTATUS</dt>
-** <dd>This option takes single argument of type int, interpreted as a
-** boolean, which enables or disables the collection of memory allocation
-** statistics. When disabled, the following SQLite interfaces become
-** non-operational:
-** <ul>
-** <li> [sqlite3_memory_used()]
-** <li> [sqlite3_memory_highwater()]
-** <li> [sqlite3_soft_heap_limit()]
-** <li> [sqlite3_status()]
-** </ul>
-** </dd>
-**
-** <dt>SQLITE_CONFIG_SCRATCH</dt>
-** <dd>This option specifies a static memory buffer that SQLite can use for
-** scratch memory. There are three arguments: A pointer to the memory, the
-** size of each scratch buffer (sz), and the number of buffers (N). The sz
-** argument must be a multiple of 16. The sz parameter should be a few bytes
-** larger than the actual scratch space required due internal overhead.
-** The first
-** argument should point to an allocation of at least sz*N bytes of memory.
-** SQLite will use no more than one scratch buffer at once per thread, so
-** N should be set to the expected maximum number of threads. The sz
-** parameter should be 6 times the size of the largest database page size.
-** Scratch buffers are used as part of the btree balance operation. If
-** The btree balancer needs additional memory beyond what is provided by
-** scratch buffers or if no scratch buffer space is specified, then SQLite
-** goes to [sqlite3_malloc()] to obtain the memory it needs.</dd>
-**
-** <dt>SQLITE_CONFIG_PAGECACHE</dt>
-** <dd>This option specifies a static memory buffer that SQLite can use for
-** the database page cache with the default page cache implemenation.
-** This configuration should not be used if an application-define page
-** cache implementation is loaded using the SQLITE_CONFIG_PCACHE option.
-** There are three arguments to this option: A pointer to the
-** memory, the size of each page buffer (sz), and the number of pages (N).
-** The sz argument must be a power of two between 512 and 32768. The first
-** argument should point to an allocation of at least sz*N bytes of memory.
-** SQLite will use the memory provided by the first argument to satisfy its
-** memory needs for the first N pages that it adds to cache. If additional
-** page cache memory is needed beyond what is provided by this option, then
-** SQLite goes to [sqlite3_malloc()] for the additional storage space.
-** The implementation might use one or more of the N buffers to hold
-** memory accounting information. </dd>
-**
-** <dt>SQLITE_CONFIG_HEAP</dt>
-** <dd>This option specifies a static memory buffer that SQLite will use
-** for all of its dynamic memory allocation needs beyond those provided
-** for by [SQLITE_CONFIG_SCRATCH] and [SQLITE_CONFIG_PAGECACHE].
-** There are three arguments: A pointer to the memory, the number of
-** bytes in the memory buffer, and the minimum allocation size. If
-** the first pointer (the memory pointer) is NULL, then SQLite reverts
-** to using its default memory allocator (the system malloc() implementation),
-** undoing any prior invocation of [SQLITE_CONFIG_MALLOC]. If the
-** memory pointer is not NULL and either [SQLITE_ENABLE_MEMSYS3] or
-** [SQLITE_ENABLE_MEMSYS5] are defined, then the alternative memory
-** allocator is engaged to handle all of SQLites memory allocation needs.</dd>
-**
-** <dt>SQLITE_CONFIG_MUTEX</dt>
-** <dd>This option takes a single argument which is a pointer to an
-** instance of the [sqlite3_mutex_methods] structure. The argument specifies
-** alternative low-level mutex routines to be used in place
-** the mutex routines built into SQLite.</dd>
-**
-** <dt>SQLITE_CONFIG_GETMUTEX</dt>
-** <dd>This option takes a single argument which is a pointer to an
-** instance of the [sqlite3_mutex_methods] structure. The
-** [sqlite3_mutex_methods]
-** structure is filled with the currently defined mutex routines.
-** This option can be used to overload the default mutex allocation
-** routines with a wrapper used to track mutex usage for performance
-** profiling or testing, for example.</dd>
-**
-** <dt>SQLITE_CONFIG_LOOKASIDE</dt>
-** <dd>This option takes two arguments that determine the default
-** memory allcation lookaside optimization. The first argument is the
-** size of each lookaside buffer slot and the second is the number of
-** slots allocated to each database connection.</dd>
-**
-** <dt>SQLITE_CONFIG_PCACHE</dt>
-** <dd>This option takes a single argument which is a pointer to
-** an [sqlite3_pcache_methods] object. This object specifies the interface
-** to a custom page cache implementation. SQLite makes a copy of the
-** object and uses it for page cache memory allocations.</dd>
-**
-** <dt>SQLITE_CONFIG_GETPCACHE</dt>
-** <dd>This option takes a single argument which is a pointer to an
-** [sqlite3_pcache_methods] object. SQLite copies of the current
-** page cache implementation into that object.</dd>
-**
-** </dl>
-*/
-#define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */
-#define SQLITE_CONFIG_MULTITHREAD 2 /* nil */
-#define SQLITE_CONFIG_SERIALIZED 3 /* nil */
-#define SQLITE_CONFIG_MALLOC 4 /* sqlite3_mem_methods* */
-#define SQLITE_CONFIG_GETMALLOC 5 /* sqlite3_mem_methods* */
-#define SQLITE_CONFIG_SCRATCH 6 /* void*, int sz, int N */
-#define SQLITE_CONFIG_PAGECACHE 7 /* void*, int sz, int N */
-#define SQLITE_CONFIG_HEAP 8 /* void*, int nByte, int min */
-#define SQLITE_CONFIG_MEMSTATUS 9 /* boolean */
-#define SQLITE_CONFIG_MUTEX 10 /* sqlite3_mutex_methods* */
-#define SQLITE_CONFIG_GETMUTEX 11 /* sqlite3_mutex_methods* */
-/* previously SQLITE_CONFIG_CHUNKALLOC 12 which is now unused. */
-#define SQLITE_CONFIG_LOOKASIDE 13 /* int int */
-#define SQLITE_CONFIG_PCACHE 14 /* sqlite3_pcache_methods* */
-#define SQLITE_CONFIG_GETPCACHE 15 /* sqlite3_pcache_methods* */
-
-/*
-** CAPI3REF: Configuration Options {H10170} <S20000>
-** EXPERIMENTAL
-**
-** These constants are the available integer configuration options that
-** can be passed as the second argument to the [sqlite3_db_config()] interface.
-**
-** New configuration options may be added in future releases of SQLite.
-** Existing configuration options might be discontinued. Applications
-** should check the return code from [sqlite3_db_config()] to make sure that
-** the call worked. The [sqlite3_db_config()] interface will return a
-** non-zero [error code] if a discontinued or unsupported configuration option
-** is invoked.
-**
-** <dl>
-** <dt>SQLITE_DBCONFIG_LOOKASIDE</dt>
-** <dd>This option takes three additional arguments that determine the
-** [lookaside memory allocator] configuration for the [database connection].
-** The first argument (the third parameter to [sqlite3_db_config()] is a
-** pointer to a memory buffer to use for lookaside memory. The first
-** argument may be NULL in which case SQLite will allocate the lookaside
-** buffer itself using [sqlite3_malloc()]. The second argument is the
-** size of each lookaside buffer slot and the third argument is the number of
-** slots. The size of the buffer in the first argument must be greater than
-** or equal to the product of the second and third arguments.</dd>
-**
-** </dl>
-*/
-#define SQLITE_DBCONFIG_LOOKASIDE 1001 /* void* int int */
-
-
-/*
-** CAPI3REF: Enable Or Disable Extended Result Codes {H12200} <S10700>
-**
-** The sqlite3_extended_result_codes() routine enables or disables the
-** [extended result codes] feature of SQLite. The extended result
-** codes are disabled by default for historical compatibility considerations.
-**
-** Requirements:
-** [H12201] [H12202]
-*/
-int sqlite3_extended_result_codes(sqlite3*, int onoff);
-
-/*
-** CAPI3REF: Last Insert Rowid {H12220} <S10700>
-**
-** Each entry in an SQLite table has a unique 64-bit signed
-** integer key called the [ROWID | "rowid"]. The rowid is always available
-** as an undeclared column named ROWID, OID, or _ROWID_ as long as those
-** names are not also used by explicitly declared columns. If
-** the table has a column of type [INTEGER PRIMARY KEY] then that column
-** is another alias for the rowid.
-**
-** This routine returns the [rowid] of the most recent
-** successful [INSERT] into the database from the [database connection]
-** in the first argument. If no successful [INSERT]s
-** have ever occurred on that database connection, zero is returned.
-**
-** If an [INSERT] occurs within a trigger, then the [rowid] of the inserted
-** row is returned by this routine as long as the trigger is running.
-** But once the trigger terminates, the value returned by this routine
-** reverts to the last value inserted before the trigger fired.
-**
-** An [INSERT] that fails due to a constraint violation is not a
-** successful [INSERT] and does not change the value returned by this
-** routine. Thus INSERT OR FAIL, INSERT OR IGNORE, INSERT OR ROLLBACK,
-** and INSERT OR ABORT make no changes to the return value of this
-** routine when their insertion fails. When INSERT OR REPLACE
-** encounters a constraint violation, it does not fail. The
-** INSERT continues to completion after deleting rows that caused
-** the constraint problem so INSERT OR REPLACE will always change
-** the return value of this interface.
-**
-** For the purposes of this routine, an [INSERT] is considered to
-** be successful even if it is subsequently rolled back.
-**
-** Requirements:
-** [H12221] [H12223]
-**
-** If a separate thread performs a new [INSERT] on the same
-** database connection while the [sqlite3_last_insert_rowid()]
-** function is running and thus changes the last insert [rowid],
-** then the value returned by [sqlite3_last_insert_rowid()] is
-** unpredictable and might not equal either the old or the new
-** last insert [rowid].
-*/
-sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*);
-
-/*
-** CAPI3REF: Count The Number Of Rows Modified {H12240} <S10600>
-**
-** This function returns the number of database rows that were changed
-** or inserted or deleted by the most recently completed SQL statement
-** on the [database connection] specified by the first parameter.
-** Only changes that are directly specified by the [INSERT], [UPDATE],
-** or [DELETE] statement are counted. Auxiliary changes caused by
-** triggers are not counted. Use the [sqlite3_total_changes()] function
-** to find the total number of changes including changes caused by triggers.
-**
-** Changes to a view that are simulated by an [INSTEAD OF trigger]
-** are not counted. Only real table changes are counted.
-**
-** A "row change" is a change to a single row of a single table
-** caused by an INSERT, DELETE, or UPDATE statement. Rows that
-** are changed as side effects of [REPLACE] constraint resolution,
-** rollback, ABORT processing, [DROP TABLE], or by any other
-** mechanisms do not count as direct row changes.
-**
-** A "trigger context" is a scope of execution that begins and
-** ends with the script of a [CREATE TRIGGER | trigger].
-** Most SQL statements are
-** evaluated outside of any trigger. This is the "top level"
-** trigger context. If a trigger fires from the top level, a
-** new trigger context is entered for the duration of that one
-** trigger. Subtriggers create subcontexts for their duration.
-**
-** Calling [sqlite3_exec()] or [sqlite3_step()] recursively does
-** not create a new trigger context.
-**
-** This function returns the number of direct row changes in the
-** most recent INSERT, UPDATE, or DELETE statement within the same
-** trigger context.
-**
-** Thus, when called from the top level, this function returns the
-** number of changes in the most recent INSERT, UPDATE, or DELETE
-** that also occurred at the top level. Within the body of a trigger,
-** the sqlite3_changes() interface can be called to find the number of
-** changes in the most recently completed INSERT, UPDATE, or DELETE
-** statement within the body of the same trigger.
-** However, the number returned does not include changes
-** caused by subtriggers since those have their own context.
-**
-** See also the [sqlite3_total_changes()] interface and the
-** [count_changes pragma].
-**
-** Requirements:
-** [H12241] [H12243]
-**
-** If a separate thread makes changes on the same database connection
-** while [sqlite3_changes()] is running then the value returned
-** is unpredictable and not meaningful.
-*/
-int sqlite3_changes(sqlite3*);
-
-/*
-** CAPI3REF: Total Number Of Rows Modified {H12260} <S10600>
-**
-** This function returns the number of row changes caused by [INSERT],
-** [UPDATE] or [DELETE] statements since the [database connection] was opened.
-** The count includes all changes from all
-** [CREATE TRIGGER | trigger] contexts. However,
-** the count does not include changes used to implement [REPLACE] constraints,
-** do rollbacks or ABORT processing, or [DROP TABLE] processing. The
-** count does not rows of views that fire an [INSTEAD OF trigger], though if
-** the INSTEAD OF trigger makes changes of its own, those changes are
-** counted.
-** The changes are counted as soon as the statement that makes them is
-** completed (when the statement handle is passed to [sqlite3_reset()] or
-** [sqlite3_finalize()]).
-**
-** See also the [sqlite3_changes()] interface and the
-** [count_changes pragma].
-**
-** Requirements:
-** [H12261] [H12263]
-**
-** If a separate thread makes changes on the same database connection
-** while [sqlite3_total_changes()] is running then the value
-** returned is unpredictable and not meaningful.
-*/
-int sqlite3_total_changes(sqlite3*);
-
-/*
-** CAPI3REF: Interrupt A Long-Running Query {H12270} <S30500>
-**
-** This function causes any pending database operation to abort and
-** return at its earliest opportunity. This routine is typically
-** called in response to a user action such as pressing "Cancel"
-** or Ctrl-C where the user wants a long query operation to halt
-** immediately.
-**
-** It is safe to call this routine from a thread different from the
-** thread that is currently running the database operation. But it
-** is not safe to call this routine with a [database connection] that
-** is closed or might close before sqlite3_interrupt() returns.
-**
-** If an SQL operation is very nearly finished at the time when
-** sqlite3_interrupt() is called, then it might not have an opportunity
-** to be interrupted and might continue to completion.
-**
-** An SQL operation that is interrupted will return [SQLITE_INTERRUPT].
-** If the interrupted SQL operation is an INSERT, UPDATE, or DELETE
-** that is inside an explicit transaction, then the entire transaction
-** will be rolled back automatically.
-**
-** The sqlite3_interrupt(D) call is in effect until all currently running
-** SQL statements on [database connection] D complete. Any new SQL statements
-** that are started after the sqlite3_interrupt() call and before the
-** running statements reaches zero are interrupted as if they had been
-** running prior to the sqlite3_interrupt() call. New SQL statements
-** that are started after the running statement count reaches zero are
-** not effected by the sqlite3_interrupt().
-** A call to sqlite3_interrupt(D) that occurs when there are no running
-** SQL statements is a no-op and has no effect on SQL statements
-** that are started after the sqlite3_interrupt() call returns.
-**
-** Requirements:
-** [H12271] [H12272]
-**
-** If the database connection closes while [sqlite3_interrupt()]
-** is running then bad things will likely happen.
-*/
-void sqlite3_interrupt(sqlite3*);
-
-/*
-** CAPI3REF: Determine If An SQL Statement Is Complete {H10510} <S70200>
-**
-** These routines are useful during command-line input to determine if the
-** currently entered text seems to form a complete SQL statement or
-** if additional input is needed before sending the text into
-** SQLite for parsing. These routines return 1 if the input string
-** appears to be a complete SQL statement. A statement is judged to be
-** complete if it ends with a semicolon token and is not a prefix of a
-** well-formed CREATE TRIGGER statement. Semicolons that are embedded within
-** string literals or quoted identifier names or comments are not
-** independent tokens (they are part of the token in which they are
-** embedded) and thus do not count as a statement terminator. Whitespace
-** and comments that follow the final semicolon are ignored.
-**
-** These routines return 0 if the statement is incomplete. If a
-** memory allocation fails, then SQLITE_NOMEM is returned.
-**
-** These routines do not parse the SQL statements thus
-** will not detect syntactically incorrect SQL.
-**
-** If SQLite has not been initialized using [sqlite3_initialize()] prior
-** to invoking sqlite3_complete16() then sqlite3_initialize() is invoked
-** automatically by sqlite3_complete16(). If that initialization fails,
-** then the return value from sqlite3_complete16() will be non-zero
-** regardless of whether or not the input SQL is complete.
-**
-** Requirements: [H10511] [H10512]
-**
-** The input to [sqlite3_complete()] must be a zero-terminated
-** UTF-8 string.
-**
-** The input to [sqlite3_complete16()] must be a zero-terminated
-** UTF-16 string in native byte order.
-*/
-int sqlite3_complete(const char *sql);
-int sqlite3_complete16(const void *sql);
-
-/*
-** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors {H12310} <S40400>
-**
-** This routine sets a callback function that might be invoked whenever
-** an attempt is made to open a database table that another thread
-** or process has locked.
-**
-** If the busy callback is NULL, then [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED]
-** is returned immediately upon encountering the lock. If the busy callback
-** is not NULL, then the callback will be invoked with two arguments.
-**
-** The first argument to the handler is a copy of the void* pointer which
-** is the third argument to sqlite3_busy_handler(). The second argument to
-** the handler callback is the number of times that the busy handler has
-** been invoked for this locking event. If the
-** busy callback returns 0, then no additional attempts are made to
-** access the database and [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED] is returned.
-** If the callback returns non-zero, then another attempt
-** is made to open the database for reading and the cycle repeats.
-**
-** The presence of a busy handler does not guarantee that it will be invoked
-** when there is lock contention. If SQLite determines that invoking the busy
-** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY]
-** or [SQLITE_IOERR_BLOCKED] instead of invoking the busy handler.
-** Consider a scenario where one process is holding a read lock that
-** it is trying to promote to a reserved lock and
-** a second process is holding a reserved lock that it is trying
-** to promote to an exclusive lock. The first process cannot proceed
-** because it is blocked by the second and the second process cannot
-** proceed because it is blocked by the first. If both processes
-** invoke the busy handlers, neither will make any progress. Therefore,
-** SQLite returns [SQLITE_BUSY] for the first process, hoping that this
-** will induce the first process to release its read lock and allow
-** the second process to proceed.
-**
-** The default busy callback is NULL.
-**
-** The [SQLITE_BUSY] error is converted to [SQLITE_IOERR_BLOCKED]
-** when SQLite is in the middle of a large transaction where all the
-** changes will not fit into the in-memory cache. SQLite will
-** already hold a RESERVED lock on the database file, but it needs
-** to promote this lock to EXCLUSIVE so that it can spill cache
-** pages into the database file without harm to concurrent
-** readers. If it is unable to promote the lock, then the in-memory
-** cache will be left in an inconsistent state and so the error
-** code is promoted from the relatively benign [SQLITE_BUSY] to
-** the more severe [SQLITE_IOERR_BLOCKED]. This error code promotion
-** forces an automatic rollback of the changes. See the
-** <a href="/cvstrac/wiki?p=CorruptionFollowingBusyError">
-** CorruptionFollowingBusyError</a> wiki page for a discussion of why
-** this is important.
-**
-** There can only be a single busy handler defined for each
-** [database connection]. Setting a new busy handler clears any
-** previously set handler. Note that calling [sqlite3_busy_timeout()]
-** will also set or clear the busy handler.
-**
-** The busy callback should not take any actions which modify the
-** database connection that invoked the busy handler. Any such actions
-** result in undefined behavior.
-**
-** Requirements:
-** [H12311] [H12312] [H12314] [H12316] [H12318]
-**
-** A busy handler must not close the database connection
-** or [prepared statement] that invoked the busy handler.
-*/
-int sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*);
-
-/*
-** CAPI3REF: Set A Busy Timeout {H12340} <S40410>
-**
-** This routine sets a [sqlite3_busy_handler | busy handler] that sleeps
-** for a specified amount of time when a table is locked. The handler
-** will sleep multiple times until at least "ms" milliseconds of sleeping
-** have accumulated. {H12343} After "ms" milliseconds of sleeping,
-** the handler returns 0 which causes [sqlite3_step()] to return
-** [SQLITE_BUSY] or [SQLITE_IOERR_BLOCKED].
-**
-** Calling this routine with an argument less than or equal to zero
-** turns off all busy handlers.
-**
-** There can only be a single busy handler for a particular
-** [database connection] any any given moment. If another busy handler
-** was defined (using [sqlite3_busy_handler()]) prior to calling
-** this routine, that other busy handler is cleared.
-**
-** Requirements:
-** [H12341] [H12343] [H12344]
-*/
-int sqlite3_busy_timeout(sqlite3*, int ms);
-
-/*
-** CAPI3REF: Convenience Routines For Running Queries {H12370} <S10000>
-**
-** Definition: A <b>result table</b> is memory data structure created by the
-** [sqlite3_get_table()] interface. A result table records the
-** complete query results from one or more queries.
-**
-** The table conceptually has a number of rows and columns. But
-** these numbers are not part of the result table itself. These
-** numbers are obtained separately. Let N be the number of rows
-** and M be the number of columns.
-**
-** A result table is an array of pointers to zero-terminated UTF-8 strings.
-** There are (N+1)*M elements in the array. The first M pointers point
-** to zero-terminated strings that contain the names of the columns.
-** The remaining entries all point to query results. NULL values result
-** in NULL pointers. All other values are in their UTF-8 zero-terminated
-** string representation as returned by [sqlite3_column_text()].
-**
-** A result table might consist of one or more memory allocations.
-** It is not safe to pass a result table directly to [sqlite3_free()].
-** A result table should be deallocated using [sqlite3_free_table()].
-**
-** As an example of the result table format, suppose a query result
-** is as follows:
-**
-** <blockquote><pre>
-** Name | Age
-** -----------------------
-** Alice | 43
-** Bob | 28
-** Cindy | 21
-** </pre></blockquote>
-**
-** There are two column (M==2) and three rows (N==3). Thus the
-** result table has 8 entries. Suppose the result table is stored
-** in an array names azResult. Then azResult holds this content:
-**
-** <blockquote><pre>
-** azResult&#91;0] = "Name";
-** azResult&#91;1] = "Age";
-** azResult&#91;2] = "Alice";
-** azResult&#91;3] = "43";
-** azResult&#91;4] = "Bob";
-** azResult&#91;5] = "28";
-** azResult&#91;6] = "Cindy";
-** azResult&#91;7] = "21";
-** </pre></blockquote>
-**
-** The sqlite3_get_table() function evaluates one or more
-** semicolon-separated SQL statements in the zero-terminated UTF-8
-** string of its 2nd parameter. It returns a result table to the
-** pointer given in its 3rd parameter.
-**
-** After the calling function has finished using the result, it should
-** pass the pointer to the result table to sqlite3_free_table() in order to
-** release the memory that was malloced. Because of the way the
-** [sqlite3_malloc()] happens within sqlite3_get_table(), the calling
-** function must not try to call [sqlite3_free()] directly. Only
-** [sqlite3_free_table()] is able to release the memory properly and safely.
-**
-** The sqlite3_get_table() interface is implemented as a wrapper around
-** [sqlite3_exec()]. The sqlite3_get_table() routine does not have access
-** to any internal data structures of SQLite. It uses only the public
-** interface defined here. As a consequence, errors that occur in the
-** wrapper layer outside of the internal [sqlite3_exec()] call are not
-** reflected in subsequent calls to [sqlite3_errcode()] or [sqlite3_errmsg()].
-**
-** Requirements:
-** [H12371] [H12373] [H12374] [H12376] [H12379] [H12382]
-*/
-int sqlite3_get_table(
- sqlite3 *db, /* An open database */
- const char *zSql, /* SQL to be evaluated */
- char ***pazResult, /* Results of the query */
- int *pnRow, /* Number of result rows written here */
- int *pnColumn, /* Number of result columns written here */
- char **pzErrmsg /* Error msg written here */
-);
-void sqlite3_free_table(char **result);
-
-/*
-** CAPI3REF: Formatted String Printing Functions {H17400} <S70000><S20000>
-**
-** These routines are workalikes of the "printf()" family of functions
-** from the standard C library.
-**
-** The sqlite3_mprintf() and sqlite3_vmprintf() routines write their
-** results into memory obtained from [sqlite3_malloc()].
-** The strings returned by these two routines should be
-** released by [sqlite3_free()]. Both routines return a
-** NULL pointer if [sqlite3_malloc()] is unable to allocate enough
-** memory to hold the resulting string.
-**
-** In sqlite3_snprintf() routine is similar to "snprintf()" from
-** the standard C library. The result is written into the
-** buffer supplied as the second parameter whose size is given by
-** the first parameter. Note that the order of the
-** first two parameters is reversed from snprintf(). This is an
-** historical accident that cannot be fixed without breaking
-** backwards compatibility. Note also that sqlite3_snprintf()
-** returns a pointer to its buffer instead of the number of
-** characters actually written into the buffer. We admit that
-** the number of characters written would be a more useful return
-** value but we cannot change the implementation of sqlite3_snprintf()
-** now without breaking compatibility.
-**
-** As long as the buffer size is greater than zero, sqlite3_snprintf()
-** guarantees that the buffer is always zero-terminated. The first
-** parameter "n" is the total size of the buffer, including space for
-** the zero terminator. So the longest string that can be completely
-** written will be n-1 characters.
-**
-** These routines all implement some additional formatting
-** options that are useful for constructing SQL statements.
-** All of the usual printf() formatting options apply. In addition, there
-** is are "%q", "%Q", and "%z" options.
-**
-** The %q option works like %s in that it substitutes a null-terminated
-** string from the argument list. But %q also doubles every '\'' character.
-** %q is designed for use inside a string literal. By doubling each '\''
-** character it escapes that character and allows it to be inserted into
-** the string.
-**
-** For example, assume the string variable zText contains text as follows:
-**
-** <blockquote><pre>
-** char *zText = "It's a happy day!";
-** </pre></blockquote>
-**
-** One can use this text in an SQL statement as follows:
-**
-** <blockquote><pre>
-** char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES('%q')", zText);
-** sqlite3_exec(db, zSQL, 0, 0, 0);
-** sqlite3_free(zSQL);
-** </pre></blockquote>
-**
-** Because the %q format string is used, the '\'' character in zText
-** is escaped and the SQL generated is as follows:
-**
-** <blockquote><pre>
-** INSERT INTO table1 VALUES('It''s a happy day!')
-** </pre></blockquote>
-**
-** This is correct. Had we used %s instead of %q, the generated SQL
-** would have looked like this:
-**
-** <blockquote><pre>
-** INSERT INTO table1 VALUES('It's a happy day!');
-** </pre></blockquote>
-**
-** This second example is an SQL syntax error. As a general rule you should
-** always use %q instead of %s when inserting text into a string literal.
-**
-** The %Q option works like %q except it also adds single quotes around
-** the outside of the total string. Additionally, if the parameter in the
-** argument list is a NULL pointer, %Q substitutes the text "NULL" (without
-** single quotes) in place of the %Q option. So, for example, one could say:
-**
-** <blockquote><pre>
-** char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES(%Q)", zText);
-** sqlite3_exec(db, zSQL, 0, 0, 0);
-** sqlite3_free(zSQL);
-** </pre></blockquote>
-**
-** The code above will render a correct SQL statement in the zSQL
-** variable even if the zText variable is a NULL pointer.
-**
-** The "%z" formatting option works exactly like "%s" with the
-** addition that after the string has been read and copied into
-** the result, [sqlite3_free()] is called on the input string. {END}
-**
-** Requirements:
-** [H17403] [H17406] [H17407]
-*/
-char *sqlite3_mprintf(const char*,...);
-char *sqlite3_vmprintf(const char*, va_list);
-char *sqlite3_snprintf(int,char*,const char*, ...);
-
-/*
-** CAPI3REF: Memory Allocation Subsystem {H17300} <S20000>
-**
-** The SQLite core uses these three routines for all of its own
-** internal memory allocation needs. "Core" in the previous sentence
-** does not include operating-system specific VFS implementation. The
-** Windows VFS uses native malloc() and free() for some operations.
-**
-** The sqlite3_malloc() routine returns a pointer to a block
-** of memory at least N bytes in length, where N is the parameter.
-** If sqlite3_malloc() is unable to obtain sufficient free
-** memory, it returns a NULL pointer. If the parameter N to
-** sqlite3_malloc() is zero or negative then sqlite3_malloc() returns
-** a NULL pointer.
-**
-** Calling sqlite3_free() with a pointer previously returned
-** by sqlite3_malloc() or sqlite3_realloc() releases that memory so
-** that it might be reused. The sqlite3_free() routine is
-** a no-op if is called with a NULL pointer. Passing a NULL pointer
-** to sqlite3_free() is harmless. After being freed, memory
-** should neither be read nor written. Even reading previously freed
-** memory might result in a segmentation fault or other severe error.
-** Memory corruption, a segmentation fault, or other severe error
-** might result if sqlite3_free() is called with a non-NULL pointer that
-** was not obtained from sqlite3_malloc() or sqlite3_realloc().
-**
-** The sqlite3_realloc() interface attempts to resize a
-** prior memory allocation to be at least N bytes, where N is the
-** second parameter. The memory allocation to be resized is the first
-** parameter. If the first parameter to sqlite3_realloc()
-** is a NULL pointer then its behavior is identical to calling
-** sqlite3_malloc(N) where N is the second parameter to sqlite3_realloc().
-** If the second parameter to sqlite3_realloc() is zero or
-** negative then the behavior is exactly the same as calling
-** sqlite3_free(P) where P is the first parameter to sqlite3_realloc().
-** sqlite3_realloc() returns a pointer to a memory allocation
-** of at least N bytes in size or NULL if sufficient memory is unavailable.
-** If M is the size of the prior allocation, then min(N,M) bytes
-** of the prior allocation are copied into the beginning of buffer returned
-** by sqlite3_realloc() and the prior allocation is freed.
-** If sqlite3_realloc() returns NULL, then the prior allocation
-** is not freed.
-**
-** The memory returned by sqlite3_malloc() and sqlite3_realloc()
-** is always aligned to at least an 8 byte boundary. {END}
-**
-** The default implementation of the memory allocation subsystem uses
-** the malloc(), realloc() and free() provided by the standard C library.
-** {H17382} However, if SQLite is compiled with the
-** SQLITE_MEMORY_SIZE=<i>NNN</i> C preprocessor macro (where <i>NNN</i>
-** is an integer), then SQLite create a static array of at least
-** <i>NNN</i> bytes in size and uses that array for all of its dynamic
-** memory allocation needs. {END} Additional memory allocator options
-** may be added in future releases.
-**
-** In SQLite version 3.5.0 and 3.5.1, it was possible to define
-** the SQLITE_OMIT_MEMORY_ALLOCATION which would cause the built-in
-** implementation of these routines to be omitted. That capability
-** is no longer provided. Only built-in memory allocators can be used.
-**
-** The Windows OS interface layer calls
-** the system malloc() and free() directly when converting
-** filenames between the UTF-8 encoding used by SQLite
-** and whatever filename encoding is used by the particular Windows
-** installation. Memory allocation errors are detected, but
-** they are reported back as [SQLITE_CANTOPEN] or
-** [SQLITE_IOERR] rather than [SQLITE_NOMEM].
-**
-** Requirements:
-** [H17303] [H17304] [H17305] [H17306] [H17310] [H17312] [H17315] [H17318]
-** [H17321] [H17322] [H17323]
-**
-** The pointer arguments to [sqlite3_free()] and [sqlite3_realloc()]
-** must be either NULL or else pointers obtained from a prior
-** invocation of [sqlite3_malloc()] or [sqlite3_realloc()] that have
-** not yet been released.
-**
-** The application must not read or write any part of
-** a block of memory after it has been released using
-** [sqlite3_free()] or [sqlite3_realloc()].
-*/
-void *sqlite3_malloc(int);
-void *sqlite3_realloc(void*, int);
-void sqlite3_free(void*);
-
-/*
-** CAPI3REF: Memory Allocator Statistics {H17370} <S30210>
-**
-** SQLite provides these two interfaces for reporting on the status
-** of the [sqlite3_malloc()], [sqlite3_free()], and [sqlite3_realloc()]
-** routines, which form the built-in memory allocation subsystem.
-**
-** Requirements:
-** [H17371] [H17373] [H17374] [H17375]
-*/
-sqlite3_int64 sqlite3_memory_used(void);
-sqlite3_int64 sqlite3_memory_highwater(int resetFlag);
-
-/*
-** CAPI3REF: Pseudo-Random Number Generator {H17390} <S20000>
-**
-** SQLite contains a high-quality pseudo-random number generator (PRNG) used to
-** select random [ROWID | ROWIDs] when inserting new records into a table that
-** already uses the largest possible [ROWID]. The PRNG is also used for
-** the build-in random() and randomblob() SQL functions. This interface allows
-** applications to access the same PRNG for other purposes.
-**
-** A call to this routine stores N bytes of randomness into buffer P.
-**
-** The first time this routine is invoked (either internally or by
-** the application) the PRNG is seeded using randomness obtained
-** from the xRandomness method of the default [sqlite3_vfs] object.
-** On all subsequent invocations, the pseudo-randomness is generated
-** internally and without recourse to the [sqlite3_vfs] xRandomness
-** method.
-**
-** Requirements:
-** [H17392]
-*/
-void sqlite3_randomness(int N, void *P);
-
-/*
-** CAPI3REF: Compile-Time Authorization Callbacks {H12500} <S70100>
-**
-** This routine registers a authorizer callback with a particular
-** [database connection], supplied in the first argument.
-** The authorizer callback is invoked as SQL statements are being compiled
-** by [sqlite3_prepare()] or its variants [sqlite3_prepare_v2()],
-** [sqlite3_prepare16()] and [sqlite3_prepare16_v2()]. At various
-** points during the compilation process, as logic is being created
-** to perform various actions, the authorizer callback is invoked to
-** see if those actions are allowed. The authorizer callback should
-** return [SQLITE_OK] to allow the action, [SQLITE_IGNORE] to disallow the
-** specific action but allow the SQL statement to continue to be
-** compiled, or [SQLITE_DENY] to cause the entire SQL statement to be
-** rejected with an error. If the authorizer callback returns
-** any value other than [SQLITE_IGNORE], [SQLITE_OK], or [SQLITE_DENY]
-** then the [sqlite3_prepare_v2()] or equivalent call that triggered
-** the authorizer will fail with an error message.
-**
-** When the callback returns [SQLITE_OK], that means the operation
-** requested is ok. When the callback returns [SQLITE_DENY], the
-** [sqlite3_prepare_v2()] or equivalent call that triggered the
-** authorizer will fail with an error message explaining that
-** access is denied.
-**
-** The first parameter to the authorizer callback is a copy of the third
-** parameter to the sqlite3_set_authorizer() interface. The second parameter
-** to the callback is an integer [SQLITE_COPY | action code] that specifies
-** the particular action to be authorized. The third through sixth parameters
-** to the callback are zero-terminated strings that contain additional
-** details about the action to be authorized.
-**
-** If the action code is [SQLITE_READ]
-** and the callback returns [SQLITE_IGNORE] then the
-** [prepared statement] statement is constructed to substitute
-** a NULL value in place of the table column that would have
-** been read if [SQLITE_OK] had been returned. The [SQLITE_IGNORE]
-** return can be used to deny an untrusted user access to individual
-** columns of a table.
-** If the action code is [SQLITE_DELETE] and the callback returns
-** [SQLITE_IGNORE] then the [DELETE] operation proceeds but the
-** [truncate optimization] is disabled and all rows are deleted individually.
-**
-** An authorizer is used when [sqlite3_prepare | preparing]
-** SQL statements from an untrusted source, to ensure that the SQL statements
-** do not try to access data they are not allowed to see, or that they do not
-** try to execute malicious statements that damage the database. For
-** example, an application may allow a user to enter arbitrary
-** SQL queries for evaluation by a database. But the application does
-** not want the user to be able to make arbitrary changes to the
-** database. An authorizer could then be put in place while the
-** user-entered SQL is being [sqlite3_prepare | prepared] that
-** disallows everything except [SELECT] statements.
-**
-** Applications that need to process SQL from untrusted sources
-** might also consider lowering resource limits using [sqlite3_limit()]
-** and limiting database size using the [max_page_count] [PRAGMA]
-** in addition to using an authorizer.
-**
-** Only a single authorizer can be in place on a database connection
-** at a time. Each call to sqlite3_set_authorizer overrides the
-** previous call. Disable the authorizer by installing a NULL callback.
-** The authorizer is disabled by default.
-**
-** The authorizer callback must not do anything that will modify
-** the database connection that invoked the authorizer callback.
-** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
-** database connections for the meaning of "modify" in this paragraph.
-**
-** When [sqlite3_prepare_v2()] is used to prepare a statement, the
-** statement might be reprepared during [sqlite3_step()] due to a
-** schema change. Hence, the application should ensure that the
-** correct authorizer callback remains in place during the [sqlite3_step()].
-**
-** Note that the authorizer callback is invoked only during
-** [sqlite3_prepare()] or its variants. Authorization is not
-** performed during statement evaluation in [sqlite3_step()], unless
-** as stated in the previous paragraph, sqlite3_step() invokes
-** sqlite3_prepare_v2() to reprepare a statement after a schema change.
-**
-** Requirements:
-** [H12501] [H12502] [H12503] [H12504] [H12505] [H12506] [H12507] [H12510]
-** [H12511] [H12512] [H12520] [H12521] [H12522]
-*/
-int sqlite3_set_authorizer(
- sqlite3*,
- int (*xAuth)(void*,int,const char*,const char*,const char*,const char*),
- void *pUserData
-);
-
-/*
-** CAPI3REF: Authorizer Return Codes {H12590} <H12500>
-**
-** The [sqlite3_set_authorizer | authorizer callback function] must
-** return either [SQLITE_OK] or one of these two constants in order
-** to signal SQLite whether or not the action is permitted. See the
-** [sqlite3_set_authorizer | authorizer documentation] for additional
-** information.
-*/
-#define SQLITE_DENY 1 /* Abort the SQL statement with an error */
-#define SQLITE_IGNORE 2 /* Don't allow access, but don't generate an error */
-
-/*
-** CAPI3REF: Authorizer Action Codes {H12550} <H12500>
-**
-** The [sqlite3_set_authorizer()] interface registers a callback function
-** that is invoked to authorize certain SQL statement actions. The
-** second parameter to the callback is an integer code that specifies
-** what action is being authorized. These are the integer action codes that
-** the authorizer callback may be passed.
-**
-** These action code values signify what kind of operation is to be
-** authorized. The 3rd and 4th parameters to the authorization
-** callback function will be parameters or NULL depending on which of these
-** codes is used as the second parameter. The 5th parameter to the
-** authorizer callback is the name of the database ("main", "temp",
-** etc.) if applicable. The 6th parameter to the authorizer callback
-** is the name of the inner-most trigger or view that is responsible for
-** the access attempt or NULL if this access attempt is directly from
-** top-level SQL code.
-**
-** Requirements:
-** [H12551] [H12552] [H12553] [H12554]
-*/
-/******************************************* 3rd ************ 4th ***********/
-#define SQLITE_CREATE_INDEX 1 /* Index Name Table Name */
-#define SQLITE_CREATE_TABLE 2 /* Table Name NULL */
-#define SQLITE_CREATE_TEMP_INDEX 3 /* Index Name Table Name */
-#define SQLITE_CREATE_TEMP_TABLE 4 /* Table Name NULL */
-#define SQLITE_CREATE_TEMP_TRIGGER 5 /* Trigger Name Table Name */
-#define SQLITE_CREATE_TEMP_VIEW 6 /* View Name NULL */
-#define SQLITE_CREATE_TRIGGER 7 /* Trigger Name Table Name */
-#define SQLITE_CREATE_VIEW 8 /* View Name NULL */
-#define SQLITE_DELETE 9 /* Table Name NULL */
-#define SQLITE_DROP_INDEX 10 /* Index Name Table Name */
-#define SQLITE_DROP_TABLE 11 /* Table Name NULL */
-#define SQLITE_DROP_TEMP_INDEX 12 /* Index Name Table Name */
-#define SQLITE_DROP_TEMP_TABLE 13 /* Table Name NULL */
-#define SQLITE_DROP_TEMP_TRIGGER 14 /* Trigger Name Table Name */
-#define SQLITE_DROP_TEMP_VIEW 15 /* View Name NULL */
-#define SQLITE_DROP_TRIGGER 16 /* Trigger Name Table Name */
-#define SQLITE_DROP_VIEW 17 /* View Name NULL */
-#define SQLITE_INSERT 18 /* Table Name NULL */
-#define SQLITE_PRAGMA 19 /* Pragma Name 1st arg or NULL */
-#define SQLITE_READ 20 /* Table Name Column Name */
-#define SQLITE_SELECT 21 /* NULL NULL */
-#define SQLITE_TRANSACTION 22 /* Operation NULL */
-#define SQLITE_UPDATE 23 /* Table Name Column Name */
-#define SQLITE_ATTACH 24 /* Filename NULL */
-#define SQLITE_DETACH 25 /* Database Name NULL */
-#define SQLITE_ALTER_TABLE 26 /* Database Name Table Name */
-#define SQLITE_REINDEX 27 /* Index Name NULL */
-#define SQLITE_ANALYZE 28 /* Table Name NULL */
-#define SQLITE_CREATE_VTABLE 29 /* Table Name Module Name */
-#define SQLITE_DROP_VTABLE 30 /* Table Name Module Name */
-#define SQLITE_FUNCTION 31 /* NULL Function Name */
-#define SQLITE_SAVEPOINT 32 /* Operation Savepoint Name */
-#define SQLITE_COPY 0 /* No longer used */
-
-/*
-** CAPI3REF: Tracing And Profiling Functions {H12280} <S60400>
-** EXPERIMENTAL
-**
-** These routines register callback functions that can be used for
-** tracing and profiling the execution of SQL statements.
-**
-** The callback function registered by sqlite3_trace() is invoked at
-** various times when an SQL statement is being run by [sqlite3_step()].
-** The callback returns a UTF-8 rendering of the SQL statement text
-** as the statement first begins executing. Additional callbacks occur
-** as each triggered subprogram is entered. The callbacks for triggers
-** contain a UTF-8 SQL comment that identifies the trigger.
-**
-** The callback function registered by sqlite3_profile() is invoked
-** as each SQL statement finishes. The profile callback contains
-** the original statement text and an estimate of wall-clock time
-** of how long that statement took to run.
-**
-** Requirements:
-** [H12281] [H12282] [H12283] [H12284] [H12285] [H12287] [H12288] [H12289]
-** [H12290]
-*/
-SQLITE_EXPERIMENTAL void *sqlite3_trace(sqlite3*, void(*xTrace)(void*,const char*), void*);
-SQLITE_EXPERIMENTAL void *sqlite3_profile(sqlite3*,
- void(*xProfile)(void*,const char*,sqlite3_uint64), void*);
-
-/*
-** CAPI3REF: Query Progress Callbacks {H12910} <S60400>
-**
-** This routine configures a callback function - the
-** progress callback - that is invoked periodically during long
-** running calls to [sqlite3_exec()], [sqlite3_step()] and
-** [sqlite3_get_table()]. An example use for this
-** interface is to keep a GUI updated during a large query.
-**
-** If the progress callback returns non-zero, the operation is
-** interrupted. This feature can be used to implement a
-** "Cancel" button on a GUI progress dialog box.
-**
-** The progress handler must not do anything that will modify
-** the database connection that invoked the progress handler.
-** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
-** database connections for the meaning of "modify" in this paragraph.
-**
-** Requirements:
-** [H12911] [H12912] [H12913] [H12914] [H12915] [H12916] [H12917] [H12918]
-**
-*/
-void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
-
-/*
-** CAPI3REF: Opening A New Database Connection {H12700} <S40200>
-**
-** These routines open an SQLite database file whose name is given by the
-** filename argument. The filename argument is interpreted as UTF-8 for
-** sqlite3_open() and sqlite3_open_v2() and as UTF-16 in the native byte
-** order for sqlite3_open16(). A [database connection] handle is usually
-** returned in *ppDb, even if an error occurs. The only exception is that
-** if SQLite is unable to allocate memory to hold the [sqlite3] object,
-** a NULL will be written into *ppDb instead of a pointer to the [sqlite3]
-** object. If the database is opened (and/or created) successfully, then
-** [SQLITE_OK] is returned. Otherwise an [error code] is returned. The
-** [sqlite3_errmsg()] or [sqlite3_errmsg16()] routines can be used to obtain
-** an English language description of the error.
-**
-** The default encoding for the database will be UTF-8 if
-** sqlite3_open() or sqlite3_open_v2() is called and
-** UTF-16 in the native byte order if sqlite3_open16() is used.
-**
-** Whether or not an error occurs when it is opened, resources
-** associated with the [database connection] handle should be released by
-** passing it to [sqlite3_close()] when it is no longer required.
-**
-** The sqlite3_open_v2() interface works like sqlite3_open()
-** except that it accepts two additional parameters for additional control
-** over the new database connection. The flags parameter can take one of
-** the following three values, optionally combined with the
-** [SQLITE_OPEN_NOMUTEX] or [SQLITE_OPEN_FULLMUTEX] flags:
-**
-** <dl>
-** <dt>[SQLITE_OPEN_READONLY]</dt>
-** <dd>The database is opened in read-only mode. If the database does not
-** already exist, an error is returned.</dd>
-**
-** <dt>[SQLITE_OPEN_READWRITE]</dt>
-** <dd>The database is opened for reading and writing if possible, or reading
-** only if the file is write protected by the operating system. In either
-** case the database must already exist, otherwise an error is returned.</dd>
-**
-** <dt>[SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]</dt>
-** <dd>The database is opened for reading and writing, and is creates it if
-** it does not already exist. This is the behavior that is always used for
-** sqlite3_open() and sqlite3_open16().</dd>
-** </dl>
-**
-** If the 3rd parameter to sqlite3_open_v2() is not one of the
-** combinations shown above or one of the combinations shown above combined
-** with the [SQLITE_OPEN_NOMUTEX] or [SQLITE_OPEN_FULLMUTEX] flags,
-** then the behavior is undefined.
-**
-** If the [SQLITE_OPEN_NOMUTEX] flag is set, then the database connection
-** opens in the multi-thread [threading mode] as long as the single-thread
-** mode has not been set at compile-time or start-time. If the
-** [SQLITE_OPEN_FULLMUTEX] flag is set then the database connection opens
-** in the serialized [threading mode] unless single-thread was
-** previously selected at compile-time or start-time.
-**
-** If the filename is ":memory:", then a private, temporary in-memory database
-** is created for the connection. This in-memory database will vanish when
-** the database connection is closed. Future versions of SQLite might
-** make use of additional special filenames that begin with the ":" character.
-** It is recommended that when a database filename actually does begin with
-** a ":" character you should prefix the filename with a pathname such as
-** "./" to avoid ambiguity.
-**
-** If the filename is an empty string, then a private, temporary
-** on-disk database will be created. This private database will be
-** automatically deleted as soon as the database connection is closed.
-**
-** The fourth parameter to sqlite3_open_v2() is the name of the
-** [sqlite3_vfs] object that defines the operating system interface that
-** the new database connection should use. If the fourth parameter is
-** a NULL pointer then the default [sqlite3_vfs] object is used.
-**
-** <b>Note to Windows users:</b> The encoding used for the filename argument
-** of sqlite3_open() and sqlite3_open_v2() must be UTF-8, not whatever
-** codepage is currently defined. Filenames containing international
-** characters must be converted to UTF-8 prior to passing them into
-** sqlite3_open() or sqlite3_open_v2().
-**
-** Requirements:
-** [H12701] [H12702] [H12703] [H12704] [H12706] [H12707] [H12709] [H12711]
-** [H12712] [H12713] [H12714] [H12717] [H12719] [H12721] [H12723]
-*/
-int sqlite3_open(
- const char *filename, /* Database filename (UTF-8) */
- sqlite3 **ppDb /* OUT: SQLite db handle */
-);
-int sqlite3_open16(
- const void *filename, /* Database filename (UTF-16) */
- sqlite3 **ppDb /* OUT: SQLite db handle */
-);
-int sqlite3_open_v2(
- const char *filename, /* Database filename (UTF-8) */
- sqlite3 **ppDb, /* OUT: SQLite db handle */
- int flags, /* Flags */
- const char *zVfs /* Name of VFS module to use */
-);
-
-/*
-** CAPI3REF: Error Codes And Messages {H12800} <S60200>
-**
-** The sqlite3_errcode() interface returns the numeric [result code] or
-** [extended result code] for the most recent failed sqlite3_* API call
-** associated with a [database connection]. If a prior API call failed
-** but the most recent API call succeeded, the return value from
-** sqlite3_errcode() is undefined. The sqlite3_extended_errcode()
-** interface is the same except that it always returns the
-** [extended result code] even when extended result codes are
-** disabled.
-**
-** The sqlite3_errmsg() and sqlite3_errmsg16() return English-language
-** text that describes the error, as either UTF-8 or UTF-16 respectively.
-** Memory to hold the error message string is managed internally.
-** The application does not need to worry about freeing the result.
-** However, the error string might be overwritten or deallocated by
-** subsequent calls to other SQLite interface functions.
-**
-** When the serialized [threading mode] is in use, it might be the
-** case that a second error occurs on a separate thread in between
-** the time of the first error and the call to these interfaces.
-** When that happens, the second error will be reported since these
-** interfaces always report the most recent result. To avoid
-** this, each thread can obtain exclusive use of the [database connection] D
-** by invoking [sqlite3_mutex_enter]([sqlite3_db_mutex](D)) before beginning
-** to use D and invoking [sqlite3_mutex_leave]([sqlite3_db_mutex](D)) after
-** all calls to the interfaces listed here are completed.
-**
-** If an interface fails with SQLITE_MISUSE, that means the interface
-** was invoked incorrectly by the application. In that case, the
-** error code and message may or may not be set.
-**
-** Requirements:
-** [H12801] [H12802] [H12803] [H12807] [H12808] [H12809]
-*/
-int sqlite3_errcode(sqlite3 *db);
-int sqlite3_extended_errcode(sqlite3 *db);
-const char *sqlite3_errmsg(sqlite3*);
-const void *sqlite3_errmsg16(sqlite3*);
-
-/*
-** CAPI3REF: SQL Statement Object {H13000} <H13010>
-** KEYWORDS: {prepared statement} {prepared statements}
-**
-** An instance of this object represents a single SQL statement.
-** This object is variously known as a "prepared statement" or a
-** "compiled SQL statement" or simply as a "statement".
-**
-** The life of a statement object goes something like this:
-**
-** <ol>
-** <li> Create the object using [sqlite3_prepare_v2()] or a related
-** function.
-** <li> Bind values to [host parameters] using the sqlite3_bind_*()
-** interfaces.
-** <li> Run the SQL by calling [sqlite3_step()] one or more times.
-** <li> Reset the statement using [sqlite3_reset()] then go back
-** to step 2. Do this zero or more times.
-** <li> Destroy the object using [sqlite3_finalize()].
-** </ol>
-**
-** Refer to documentation on individual methods above for additional
-** information.
-*/
-typedef struct sqlite3_stmt sqlite3_stmt;
-
-/*
-** CAPI3REF: Run-time Limits {H12760} <S20600>
-**
-** This interface allows the size of various constructs to be limited
-** on a connection by connection basis. The first parameter is the
-** [database connection] whose limit is to be set or queried. The
-** second parameter is one of the [limit categories] that define a
-** class of constructs to be size limited. The third parameter is the
-** new limit for that construct. The function returns the old limit.
-**
-** If the new limit is a negative number, the limit is unchanged.
-** For the limit category of SQLITE_LIMIT_XYZ there is a
-** [limits | hard upper bound]
-** set by a compile-time C preprocessor macro named
-** [limits | SQLITE_MAX_XYZ].
-** (The "_LIMIT_" in the name is changed to "_MAX_".)
-** Attempts to increase a limit above its hard upper bound are
-** silently truncated to the hard upper limit.
-**
-** Run time limits are intended for use in applications that manage
-** both their own internal database and also databases that are controlled
-** by untrusted external sources. An example application might be a
-** web browser that has its own databases for storing history and
-** separate databases controlled by JavaScript applications downloaded
-** off the Internet. The internal databases can be given the
-** large, default limits. Databases managed by external sources can
-** be given much smaller limits designed to prevent a denial of service
-** attack. Developers might also want to use the [sqlite3_set_authorizer()]
-** interface to further control untrusted SQL. The size of the database
-** created by an untrusted script can be contained using the
-** [max_page_count] [PRAGMA].
-**
-** New run-time limit categories may be added in future releases.
-**
-** Requirements:
-** [H12762] [H12766] [H12769]
-*/
-int sqlite3_limit(sqlite3*, int id, int newVal);
-
-/*
-** CAPI3REF: Run-Time Limit Categories {H12790} <H12760>
-** KEYWORDS: {limit category} {limit categories}
-**
-** These constants define various performance limits
-** that can be lowered at run-time using [sqlite3_limit()].
-** The synopsis of the meanings of the various limits is shown below.
-** Additional information is available at [limits | Limits in SQLite].
-**
-** <dl>
-** <dt>SQLITE_LIMIT_LENGTH</dt>
-** <dd>The maximum size of any string or BLOB or table row.<dd>
-**
-** <dt>SQLITE_LIMIT_SQL_LENGTH</dt>
-** <dd>The maximum length of an SQL statement.</dd>
-**
-** <dt>SQLITE_LIMIT_COLUMN</dt>
-** <dd>The maximum number of columns in a table definition or in the
-** result set of a [SELECT] or the maximum number of columns in an index
-** or in an ORDER BY or GROUP BY clause.</dd>
-**
-** <dt>SQLITE_LIMIT_EXPR_DEPTH</dt>
-** <dd>The maximum depth of the parse tree on any expression.</dd>
-**
-** <dt>SQLITE_LIMIT_COMPOUND_SELECT</dt>
-** <dd>The maximum number of terms in a compound SELECT statement.</dd>
-**
-** <dt>SQLITE_LIMIT_VDBE_OP</dt>
-** <dd>The maximum number of instructions in a virtual machine program
-** used to implement an SQL statement.</dd>
-**
-** <dt>SQLITE_LIMIT_FUNCTION_ARG</dt>
-** <dd>The maximum number of arguments on a function.</dd>
-**
-** <dt>SQLITE_LIMIT_ATTACHED</dt>
-** <dd>The maximum number of [ATTACH | attached databases].</dd>
-**
-** <dt>SQLITE_LIMIT_LIKE_PATTERN_LENGTH</dt>
-** <dd>The maximum length of the pattern argument to the [LIKE] or
-** [GLOB] operators.</dd>
-**
-** <dt>SQLITE_LIMIT_VARIABLE_NUMBER</dt>
-** <dd>The maximum number of variables in an SQL statement that can
-** be bound.</dd>
-** </dl>
-*/
-#define SQLITE_LIMIT_LENGTH 0
-#define SQLITE_LIMIT_SQL_LENGTH 1
-#define SQLITE_LIMIT_COLUMN 2
-#define SQLITE_LIMIT_EXPR_DEPTH 3
-#define SQLITE_LIMIT_COMPOUND_SELECT 4
-#define SQLITE_LIMIT_VDBE_OP 5
-#define SQLITE_LIMIT_FUNCTION_ARG 6
-#define SQLITE_LIMIT_ATTACHED 7
-#define SQLITE_LIMIT_LIKE_PATTERN_LENGTH 8
-#define SQLITE_LIMIT_VARIABLE_NUMBER 9
-
-/*
-** CAPI3REF: Compiling An SQL Statement {H13010} <S10000>
-** KEYWORDS: {SQL statement compiler}
-**
-** To execute an SQL query, it must first be compiled into a byte-code
-** program using one of these routines.
-**
-** The first argument, "db", is a [database connection] obtained from a
-** prior successful call to [sqlite3_open()], [sqlite3_open_v2()] or
-** [sqlite3_open16()]. The database connection must not have been closed.
-**
-** The second argument, "zSql", is the statement to be compiled, encoded
-** as either UTF-8 or UTF-16. The sqlite3_prepare() and sqlite3_prepare_v2()
-** interfaces use UTF-8, and sqlite3_prepare16() and sqlite3_prepare16_v2()
-** use UTF-16.
-**
-** If the nByte argument is less than zero, then zSql is read up to the
-** first zero terminator. If nByte is non-negative, then it is the maximum
-** number of bytes read from zSql. When nByte is non-negative, the
-** zSql string ends at either the first '\000' or '\u0000' character or
-** the nByte-th byte, whichever comes first. If the caller knows
-** that the supplied string is nul-terminated, then there is a small
-** performance advantage to be gained by passing an nByte parameter that
-** is equal to the number of bytes in the input string <i>including</i>
-** the nul-terminator bytes.
-**
-** If pzTail is not NULL then *pzTail is made to point to the first byte
-** past the end of the first SQL statement in zSql. These routines only
-** compile the first statement in zSql, so *pzTail is left pointing to
-** what remains uncompiled.
-**
-** *ppStmt is left pointing to a compiled [prepared statement] that can be
-** executed using [sqlite3_step()]. If there is an error, *ppStmt is set
-** to NULL. If the input text contains no SQL (if the input is an empty
-** string or a comment) then *ppStmt is set to NULL.
-** The calling procedure is responsible for deleting the compiled
-** SQL statement using [sqlite3_finalize()] after it has finished with it.
-** ppStmt may not be NULL.
-**
-** On success, [SQLITE_OK] is returned, otherwise an [error code] is returned.
-**
-** The sqlite3_prepare_v2() and sqlite3_prepare16_v2() interfaces are
-** recommended for all new programs. The two older interfaces are retained
-** for backwards compatibility, but their use is discouraged.
-** In the "v2" interfaces, the prepared statement
-** that is returned (the [sqlite3_stmt] object) contains a copy of the
-** original SQL text. This causes the [sqlite3_step()] interface to
-** behave a differently in two ways:
-**
-** <ol>
-** <li>
-** If the database schema changes, instead of returning [SQLITE_SCHEMA] as it
-** always used to do, [sqlite3_step()] will automatically recompile the SQL
-** statement and try to run it again. If the schema has changed in
-** a way that makes the statement no longer valid, [sqlite3_step()] will still
-** return [SQLITE_SCHEMA]. But unlike the legacy behavior, [SQLITE_SCHEMA] is
-** now a fatal error. Calling [sqlite3_prepare_v2()] again will not make the
-** error go away. Note: use [sqlite3_errmsg()] to find the text
-** of the parsing error that results in an [SQLITE_SCHEMA] return.
-** </li>
-**
-** <li>
-** When an error occurs, [sqlite3_step()] will return one of the detailed
-** [error codes] or [extended error codes]. The legacy behavior was that
-** [sqlite3_step()] would only return a generic [SQLITE_ERROR] result code
-** and you would have to make a second call to [sqlite3_reset()] in order
-** to find the underlying cause of the problem. With the "v2" prepare
-** interfaces, the underlying reason for the error is returned immediately.
-** </li>
-** </ol>
-**
-** Requirements:
-** [H13011] [H13012] [H13013] [H13014] [H13015] [H13016] [H13019] [H13021]
-**
-*/
-int sqlite3_prepare(
- sqlite3 *db, /* Database handle */
- const char *zSql, /* SQL statement, UTF-8 encoded */
- int nByte, /* Maximum length of zSql in bytes. */
- sqlite3_stmt **ppStmt, /* OUT: Statement handle */
- const char **pzTail /* OUT: Pointer to unused portion of zSql */
-);
-int sqlite3_prepare_v2(
- sqlite3 *db, /* Database handle */
- const char *zSql, /* SQL statement, UTF-8 encoded */
- int nByte, /* Maximum length of zSql in bytes. */
- sqlite3_stmt **ppStmt, /* OUT: Statement handle */
- const char **pzTail /* OUT: Pointer to unused portion of zSql */
-);
-int sqlite3_prepare16(
- sqlite3 *db, /* Database handle */
- const void *zSql, /* SQL statement, UTF-16 encoded */
- int nByte, /* Maximum length of zSql in bytes. */
- sqlite3_stmt **ppStmt, /* OUT: Statement handle */
- const void **pzTail /* OUT: Pointer to unused portion of zSql */
-);
-int sqlite3_prepare16_v2(
- sqlite3 *db, /* Database handle */
- const void *zSql, /* SQL statement, UTF-16 encoded */
- int nByte, /* Maximum length of zSql in bytes. */
- sqlite3_stmt **ppStmt, /* OUT: Statement handle */
- const void **pzTail /* OUT: Pointer to unused portion of zSql */
-);
-
-/*
-** CAPI3REF: Retrieving Statement SQL {H13100} <H13000>
-**
-** This interface can be used to retrieve a saved copy of the original
-** SQL text used to create a [prepared statement] if that statement was
-** compiled using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()].
-**
-** Requirements:
-** [H13101] [H13102] [H13103]
-*/
-const char *sqlite3_sql(sqlite3_stmt *pStmt);
-
-/*
-** CAPI3REF: Dynamically Typed Value Object {H15000} <S20200>
-** KEYWORDS: {protected sqlite3_value} {unprotected sqlite3_value}
-**
-** SQLite uses the sqlite3_value object to represent all values
-** that can be stored in a database table. SQLite uses dynamic typing
-** for the values it stores. Values stored in sqlite3_value objects
-** can be integers, floating point values, strings, BLOBs, or NULL.
-**
-** An sqlite3_value object may be either "protected" or "unprotected".
-** Some interfaces require a protected sqlite3_value. Other interfaces
-** will accept either a protected or an unprotected sqlite3_value.
-** Every interface that accepts sqlite3_value arguments specifies
-** whether or not it requires a protected sqlite3_value.
-**
-** The terms "protected" and "unprotected" refer to whether or not
-** a mutex is held. A internal mutex is held for a protected
-** sqlite3_value object but no mutex is held for an unprotected
-** sqlite3_value object. If SQLite is compiled to be single-threaded
-** (with [SQLITE_THREADSAFE=0] and with [sqlite3_threadsafe()] returning 0)
-** or if SQLite is run in one of reduced mutex modes
-** [SQLITE_CONFIG_SINGLETHREAD] or [SQLITE_CONFIG_MULTITHREAD]
-** then there is no distinction between protected and unprotected
-** sqlite3_value objects and they can be used interchangeably. However,
-** for maximum code portability it is recommended that applications
-** still make the distinction between between protected and unprotected
-** sqlite3_value objects even when not strictly required.
-**
-** The sqlite3_value objects that are passed as parameters into the
-** implementation of [application-defined SQL functions] are protected.
-** The sqlite3_value object returned by
-** [sqlite3_column_value()] is unprotected.
-** Unprotected sqlite3_value objects may only be used with
-** [sqlite3_result_value()] and [sqlite3_bind_value()].
-** The [sqlite3_value_blob | sqlite3_value_type()] family of
-** interfaces require protected sqlite3_value objects.
-*/
-typedef struct Mem sqlite3_value;
-
-/*
-** CAPI3REF: SQL Function Context Object {H16001} <S20200>
-**
-** The context in which an SQL function executes is stored in an
-** sqlite3_context object. A pointer to an sqlite3_context object
-** is always first parameter to [application-defined SQL functions].
-** The application-defined SQL function implementation will pass this
-** pointer through into calls to [sqlite3_result_int | sqlite3_result()],
-** [sqlite3_aggregate_context()], [sqlite3_user_data()],
-** [sqlite3_context_db_handle()], [sqlite3_get_auxdata()],
-** and/or [sqlite3_set_auxdata()].
-*/
-typedef struct sqlite3_context sqlite3_context;
-
-/*
-** CAPI3REF: Binding Values To Prepared Statements {H13500} <S70300>
-** KEYWORDS: {host parameter} {host parameters} {host parameter name}
-** KEYWORDS: {SQL parameter} {SQL parameters} {parameter binding}
-**
-** In the SQL strings input to [sqlite3_prepare_v2()] and its variants,
-** literals may be replaced by a [parameter] in one of these forms:
-**
-** <ul>
-** <li> ?
-** <li> ?NNN
-** <li> :VVV
-** <li> @VVV
-** <li> $VVV
-** </ul>
-**
-** In the parameter forms shown above NNN is an integer literal,
-** and VVV is an alpha-numeric parameter name. The values of these
-** parameters (also called "host parameter names" or "SQL parameters")
-** can be set using the sqlite3_bind_*() routines defined here.
-**
-** The first argument to the sqlite3_bind_*() routines is always
-** a pointer to the [sqlite3_stmt] object returned from
-** [sqlite3_prepare_v2()] or its variants.
-**
-** The second argument is the index of the SQL parameter to be set.
-** The leftmost SQL parameter has an index of 1. When the same named
-** SQL parameter is used more than once, second and subsequent
-** occurrences have the same index as the first occurrence.
-** The index for named parameters can be looked up using the
-** [sqlite3_bind_parameter_index()] API if desired. The index
-** for "?NNN" parameters is the value of NNN.
-** The NNN value must be between 1 and the [sqlite3_limit()]
-** parameter [SQLITE_LIMIT_VARIABLE_NUMBER] (default value: 999).
-**
-** The third argument is the value to bind to the parameter.
-**
-** In those routines that have a fourth argument, its value is the
-** number of bytes in the parameter. To be clear: the value is the
-** number of <u>bytes</u> in the value, not the number of characters.
-** If the fourth parameter is negative, the length of the string is
-** the number of bytes up to the first zero terminator.
-**
-** The fifth argument to sqlite3_bind_blob(), sqlite3_bind_text(), and
-** sqlite3_bind_text16() is a destructor used to dispose of the BLOB or
-** string after SQLite has finished with it. If the fifth argument is
-** the special value [SQLITE_STATIC], then SQLite assumes that the
-** information is in static, unmanaged space and does not need to be freed.
-** If the fifth argument has the value [SQLITE_TRANSIENT], then
-** SQLite makes its own private copy of the data immediately, before
-** the sqlite3_bind_*() routine returns.
-**
-** The sqlite3_bind_zeroblob() routine binds a BLOB of length N that
-** is filled with zeroes. A zeroblob uses a fixed amount of memory
-** (just an integer to hold its size) while it is being processed.
-** Zeroblobs are intended to serve as placeholders for BLOBs whose
-** content is later written using
-** [sqlite3_blob_open | incremental BLOB I/O] routines.
-** A negative value for the zeroblob results in a zero-length BLOB.
-**
-** The sqlite3_bind_*() routines must be called after
-** [sqlite3_prepare_v2()] (and its variants) or [sqlite3_reset()] and
-** before [sqlite3_step()].
-** Bindings are not cleared by the [sqlite3_reset()] routine.
-** Unbound parameters are interpreted as NULL.
-**
-** These routines return [SQLITE_OK] on success or an error code if
-** anything goes wrong. [SQLITE_RANGE] is returned if the parameter
-** index is out of range. [SQLITE_NOMEM] is returned if malloc() fails.
-** [SQLITE_MISUSE] might be returned if these routines are called on a
-** virtual machine that is the wrong state or which has already been finalized.
-** Detection of misuse is unreliable. Applications should not depend
-** on SQLITE_MISUSE returns. SQLITE_MISUSE is intended to indicate a
-** a logic error in the application. Future versions of SQLite might
-** panic rather than return SQLITE_MISUSE.
-**
-** See also: [sqlite3_bind_parameter_count()],
-** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()].
-**
-** Requirements:
-** [H13506] [H13509] [H13512] [H13515] [H13518] [H13521] [H13524] [H13527]
-** [H13530] [H13533] [H13536] [H13539] [H13542] [H13545] [H13548] [H13551]
-**
-*/
-int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
-int sqlite3_bind_double(sqlite3_stmt*, int, double);
-int sqlite3_bind_int(sqlite3_stmt*, int, int);
-int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
-int sqlite3_bind_null(sqlite3_stmt*, int);
-int sqlite3_bind_text(sqlite3_stmt*, int, const char*, int n, void(*)(void*));
-int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
-int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
-int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
-
-/*
-** CAPI3REF: Number Of SQL Parameters {H13600} <S70300>
-**
-** This routine can be used to find the number of [SQL parameters]
-** in a [prepared statement]. SQL parameters are tokens of the
-** form "?", "?NNN", ":AAA", "$AAA", or "@AAA" that serve as
-** placeholders for values that are [sqlite3_bind_blob | bound]
-** to the parameters at a later time.
-**
-** This routine actually returns the index of the largest (rightmost)
-** parameter. For all forms except ?NNN, this will correspond to the
-** number of unique parameters. If parameters of the ?NNN are used,
-** there may be gaps in the list.
-**
-** See also: [sqlite3_bind_blob|sqlite3_bind()],
-** [sqlite3_bind_parameter_name()], and
-** [sqlite3_bind_parameter_index()].
-**
-** Requirements:
-** [H13601]
-*/
-int sqlite3_bind_parameter_count(sqlite3_stmt*);
-
-/*
-** CAPI3REF: Name Of A Host Parameter {H13620} <S70300>
-**
-** This routine returns a pointer to the name of the n-th
-** [SQL parameter] in a [prepared statement].
-** SQL parameters of the form "?NNN" or ":AAA" or "@AAA" or "$AAA"
-** have a name which is the string "?NNN" or ":AAA" or "@AAA" or "$AAA"
-** respectively.
-** In other words, the initial ":" or "$" or "@" or "?"
-** is included as part of the name.
-** Parameters of the form "?" without a following integer have no name
-** and are also referred to as "anonymous parameters".
-**
-** The first host parameter has an index of 1, not 0.
-**
-** If the value n is out of range or if the n-th parameter is
-** nameless, then NULL is returned. The returned string is
-** always in UTF-8 encoding even if the named parameter was
-** originally specified as UTF-16 in [sqlite3_prepare16()] or
-** [sqlite3_prepare16_v2()].
-**
-** See also: [sqlite3_bind_blob|sqlite3_bind()],
-** [sqlite3_bind_parameter_count()], and
-** [sqlite3_bind_parameter_index()].
-**
-** Requirements:
-** [H13621]
-*/
-const char *sqlite3_bind_parameter_name(sqlite3_stmt*, int);
-
-/*
-** CAPI3REF: Index Of A Parameter With A Given Name {H13640} <S70300>
-**
-** Return the index of an SQL parameter given its name. The
-** index value returned is suitable for use as the second
-** parameter to [sqlite3_bind_blob|sqlite3_bind()]. A zero
-** is returned if no matching parameter is found. The parameter
-** name must be given in UTF-8 even if the original statement
-** was prepared from UTF-16 text using [sqlite3_prepare16_v2()].
-**
-** See also: [sqlite3_bind_blob|sqlite3_bind()],
-** [sqlite3_bind_parameter_count()], and
-** [sqlite3_bind_parameter_index()].
-**
-** Requirements:
-** [H13641]
-*/
-int sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
-
-/*
-** CAPI3REF: Reset All Bindings On A Prepared Statement {H13660} <S70300>
-**
-** Contrary to the intuition of many, [sqlite3_reset()] does not reset
-** the [sqlite3_bind_blob | bindings] on a [prepared statement].
-** Use this routine to reset all host parameters to NULL.
-**
-** Requirements:
-** [H13661]
-*/
-int sqlite3_clear_bindings(sqlite3_stmt*);
-
-/*
-** CAPI3REF: Number Of Columns In A Result Set {H13710} <S10700>
-**
-** Return the number of columns in the result set returned by the
-** [prepared statement]. This routine returns 0 if pStmt is an SQL
-** statement that does not return data (for example an [UPDATE]).
-**
-** Requirements:
-** [H13711]
-*/
-int sqlite3_column_count(sqlite3_stmt *pStmt);
-
-/*
-** CAPI3REF: Column Names In A Result Set {H13720} <S10700>
-**
-** These routines return the name assigned to a particular column
-** in the result set of a [SELECT] statement. The sqlite3_column_name()
-** interface returns a pointer to a zero-terminated UTF-8 string
-** and sqlite3_column_name16() returns a pointer to a zero-terminated
-** UTF-16 string. The first parameter is the [prepared statement]
-** that implements the [SELECT] statement. The second parameter is the
-** column number. The leftmost column is number 0.
-**
-** The returned string pointer is valid until either the [prepared statement]
-** is destroyed by [sqlite3_finalize()] or until the next call to
-** sqlite3_column_name() or sqlite3_column_name16() on the same column.
-**
-** If sqlite3_malloc() fails during the processing of either routine
-** (for example during a conversion from UTF-8 to UTF-16) then a
-** NULL pointer is returned.
-**
-** The name of a result column is the value of the "AS" clause for
-** that column, if there is an AS clause. If there is no AS clause
-** then the name of the column is unspecified and may change from
-** one release of SQLite to the next.
-**
-** Requirements:
-** [H13721] [H13723] [H13724] [H13725] [H13726] [H13727]
-*/
-const char *sqlite3_column_name(sqlite3_stmt*, int N);
-const void *sqlite3_column_name16(sqlite3_stmt*, int N);
-
-/*
-** CAPI3REF: Source Of Data In A Query Result {H13740} <S10700>
-**
-** These routines provide a means to determine what column of what
-** table in which database a result of a [SELECT] statement comes from.
-** The name of the database or table or column can be returned as
-** either a UTF-8 or UTF-16 string. The _database_ routines return
-** the database name, the _table_ routines return the table name, and
-** the origin_ routines return the column name.
-** The returned string is valid until the [prepared statement] is destroyed
-** using [sqlite3_finalize()] or until the same information is requested
-** again in a different encoding.
-**
-** The names returned are the original un-aliased names of the
-** database, table, and column.
-**
-** The first argument to the following calls is a [prepared statement].
-** These functions return information about the Nth column returned by
-** the statement, where N is the second function argument.
-**
-** If the Nth column returned by the statement is an expression or
-** subquery and is not a column value, then all of these functions return
-** NULL. These routine might also return NULL if a memory allocation error
-** occurs. Otherwise, they return the name of the attached database, table
-** and column that query result column was extracted from.
-**
-** As with all other SQLite APIs, those postfixed with "16" return
-** UTF-16 encoded strings, the other functions return UTF-8. {END}
-**
-** These APIs are only available if the library was compiled with the
-** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol defined.
-**
-** {A13751}
-** If two or more threads call one or more of these routines against the same
-** prepared statement and column at the same time then the results are
-** undefined.
-**
-** Requirements:
-** [H13741] [H13742] [H13743] [H13744] [H13745] [H13746] [H13748]
-**
-** If two or more threads call one or more
-** [sqlite3_column_database_name | column metadata interfaces]
-** for the same [prepared statement] and result column
-** at the same time then the results are undefined.
-*/
-const char *sqlite3_column_database_name(sqlite3_stmt*,int);
-const void *sqlite3_column_database_name16(sqlite3_stmt*,int);
-const char *sqlite3_column_table_name(sqlite3_stmt*,int);
-const void *sqlite3_column_table_name16(sqlite3_stmt*,int);
-const char *sqlite3_column_origin_name(sqlite3_stmt*,int);
-const void *sqlite3_column_origin_name16(sqlite3_stmt*,int);
-
-/*
-** CAPI3REF: Declared Datatype Of A Query Result {H13760} <S10700>
-**
-** The first parameter is a [prepared statement].
-** If this statement is a [SELECT] statement and the Nth column of the
-** returned result set of that [SELECT] is a table column (not an
-** expression or subquery) then the declared type of the table
-** column is returned. If the Nth column of the result set is an
-** expression or subquery, then a NULL pointer is returned.
-** The returned string is always UTF-8 encoded. {END}
-**
-** For example, given the database schema:
-**
-** CREATE TABLE t1(c1 VARIANT);
-**
-** and the following statement to be compiled:
-**
-** SELECT c1 + 1, c1 FROM t1;
-**
-** this routine would return the string "VARIANT" for the second result
-** column (i==1), and a NULL pointer for the first result column (i==0).
-**
-** SQLite uses dynamic run-time typing. So just because a column
-** is declared to contain a particular type does not mean that the
-** data stored in that column is of the declared type. SQLite is
-** strongly typed, but the typing is dynamic not static. Type
-** is associated with individual values, not with the containers
-** used to hold those values.
-**
-** Requirements:
-** [H13761] [H13762] [H13763]
-*/
-const char *sqlite3_column_decltype(sqlite3_stmt*,int);
-const void *sqlite3_column_decltype16(sqlite3_stmt*,int);
-
-/*
-** CAPI3REF: Evaluate An SQL Statement {H13200} <S10000>
-**
-** After a [prepared statement] has been prepared using either
-** [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] or one of the legacy
-** interfaces [sqlite3_prepare()] or [sqlite3_prepare16()], this function
-** must be called one or more times to evaluate the statement.
-**
-** The details of the behavior of the sqlite3_step() interface depend
-** on whether the statement was prepared using the newer "v2" interface
-** [sqlite3_prepare_v2()] and [sqlite3_prepare16_v2()] or the older legacy
-** interface [sqlite3_prepare()] and [sqlite3_prepare16()]. The use of the
-** new "v2" interface is recommended for new applications but the legacy
-** interface will continue to be supported.
-**
-** In the legacy interface, the return value will be either [SQLITE_BUSY],
-** [SQLITE_DONE], [SQLITE_ROW], [SQLITE_ERROR], or [SQLITE_MISUSE].
-** With the "v2" interface, any of the other [result codes] or
-** [extended result codes] might be returned as well.
-**
-** [SQLITE_BUSY] means that the database engine was unable to acquire the
-** database locks it needs to do its job. If the statement is a [COMMIT]
-** or occurs outside of an explicit transaction, then you can retry the
-** statement. If the statement is not a [COMMIT] and occurs within a
-** explicit transaction then you should rollback the transaction before
-** continuing.
-**
-** [SQLITE_DONE] means that the statement has finished executing
-** successfully. sqlite3_step() should not be called again on this virtual
-** machine without first calling [sqlite3_reset()] to reset the virtual
-** machine back to its initial state.
-**
-** If the SQL statement being executed returns any data, then [SQLITE_ROW]
-** is returned each time a new row of data is ready for processing by the
-** caller. The values may be accessed using the [column access functions].
-** sqlite3_step() is called again to retrieve the next row of data.
-**
-** [SQLITE_ERROR] means that a run-time error (such as a constraint
-** violation) has occurred. sqlite3_step() should not be called again on
-** the VM. More information may be found by calling [sqlite3_errmsg()].
-** With the legacy interface, a more specific error code (for example,
-** [SQLITE_INTERRUPT], [SQLITE_SCHEMA], [SQLITE_CORRUPT], and so forth)
-** can be obtained by calling [sqlite3_reset()] on the
-** [prepared statement]. In the "v2" interface,
-** the more specific error code is returned directly by sqlite3_step().
-**
-** [SQLITE_MISUSE] means that the this routine was called inappropriately.
-** Perhaps it was called on a [prepared statement] that has
-** already been [sqlite3_finalize | finalized] or on one that had
-** previously returned [SQLITE_ERROR] or [SQLITE_DONE]. Or it could
-** be the case that the same database connection is being used by two or
-** more threads at the same moment in time.
-**
-** <b>Goofy Interface Alert:</b> In the legacy interface, the sqlite3_step()
-** API always returns a generic error code, [SQLITE_ERROR], following any
-** error other than [SQLITE_BUSY] and [SQLITE_MISUSE]. You must call
-** [sqlite3_reset()] or [sqlite3_finalize()] in order to find one of the
-** specific [error codes] that better describes the error.
-** We admit that this is a goofy design. The problem has been fixed
-** with the "v2" interface. If you prepare all of your SQL statements
-** using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] instead
-** of the legacy [sqlite3_prepare()] and [sqlite3_prepare16()] interfaces,
-** then the more specific [error codes] are returned directly
-** by sqlite3_step(). The use of the "v2" interface is recommended.
-**
-** Requirements:
-** [H13202] [H15304] [H15306] [H15308] [H15310]
-*/
-int sqlite3_step(sqlite3_stmt*);
-
-/*
-** CAPI3REF: Number of columns in a result set {H13770} <S10700>
-**
-** Returns the number of values in the current row of the result set.
-**
-** Requirements:
-** [H13771] [H13772]
-*/
-int sqlite3_data_count(sqlite3_stmt *pStmt);
-
-/*
-** CAPI3REF: Fundamental Datatypes {H10265} <S10110><S10120>
-** KEYWORDS: SQLITE_TEXT
-**
-** {H10266} Every value in SQLite has one of five fundamental datatypes:
-**
-** <ul>
-** <li> 64-bit signed integer
-** <li> 64-bit IEEE floating point number
-** <li> string
-** <li> BLOB
-** <li> NULL
-** </ul> {END}
-**
-** These constants are codes for each of those types.
-**
-** Note that the SQLITE_TEXT constant was also used in SQLite version 2
-** for a completely different meaning. Software that links against both
-** SQLite version 2 and SQLite version 3 should use SQLITE3_TEXT, not
-** SQLITE_TEXT.
-*/
-#define SQLITE_INTEGER 1
-#define SQLITE_FLOAT 2
-#define SQLITE_BLOB 4
-#define SQLITE_NULL 5
-#ifdef SQLITE_TEXT
-# undef SQLITE_TEXT
-#else
-# define SQLITE_TEXT 3
-#endif
-#define SQLITE3_TEXT 3
-
-/*
-** CAPI3REF: Result Values From A Query {H13800} <S10700>
-** KEYWORDS: {column access functions}
-**
-** These routines form the "result set query" interface.
-**
-** These routines return information about a single column of the current
-** result row of a query. In every case the first argument is a pointer
-** to the [prepared statement] that is being evaluated (the [sqlite3_stmt*]
-** that was returned from [sqlite3_prepare_v2()] or one of its variants)
-** and the second argument is the index of the column for which information
-** should be returned. The leftmost column of the result set has the index 0.
-**
-** If the SQL statement does not currently point to a valid row, or if the
-** column index is out of range, the result is undefined.
-** These routines may only be called when the most recent call to
-** [sqlite3_step()] has returned [SQLITE_ROW] and neither
-** [sqlite3_reset()] nor [sqlite3_finalize()] have been called subsequently.
-** If any of these routines are called after [sqlite3_reset()] or
-** [sqlite3_finalize()] or after [sqlite3_step()] has returned
-** something other than [SQLITE_ROW], the results are undefined.
-** If [sqlite3_step()] or [sqlite3_reset()] or [sqlite3_finalize()]
-** are called from a different thread while any of these routines
-** are pending, then the results are undefined.
-**
-** The sqlite3_column_type() routine returns the
-** [SQLITE_INTEGER | datatype code] for the initial data type
-** of the result column. The returned value is one of [SQLITE_INTEGER],
-** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL]. The value
-** returned by sqlite3_column_type() is only meaningful if no type
-** conversions have occurred as described below. After a type conversion,
-** the value returned by sqlite3_column_type() is undefined. Future
-** versions of SQLite may change the behavior of sqlite3_column_type()
-** following a type conversion.
-**
-** If the result is a BLOB or UTF-8 string then the sqlite3_column_bytes()
-** routine returns the number of bytes in that BLOB or string.
-** If the result is a UTF-16 string, then sqlite3_column_bytes() converts
-** the string to UTF-8 and then returns the number of bytes.
-** If the result is a numeric value then sqlite3_column_bytes() uses
-** [sqlite3_snprintf()] to convert that value to a UTF-8 string and returns
-** the number of bytes in that string.
-** The value returned does not include the zero terminator at the end
-** of the string. For clarity: the value returned is the number of
-** bytes in the string, not the number of characters.
-**
-** Strings returned by sqlite3_column_text() and sqlite3_column_text16(),
-** even empty strings, are always zero terminated. The return
-** value from sqlite3_column_blob() for a zero-length BLOB is an arbitrary
-** pointer, possibly even a NULL pointer.
-**
-** The sqlite3_column_bytes16() routine is similar to sqlite3_column_bytes()
-** but leaves the result in UTF-16 in native byte order instead of UTF-8.
-** The zero terminator is not included in this count.
-**
-** The object returned by [sqlite3_column_value()] is an
-** [unprotected sqlite3_value] object. An unprotected sqlite3_value object
-** may only be used with [sqlite3_bind_value()] and [sqlite3_result_value()].
-** If the [unprotected sqlite3_value] object returned by
-** [sqlite3_column_value()] is used in any other way, including calls
-** to routines like [sqlite3_value_int()], [sqlite3_value_text()],
-** or [sqlite3_value_bytes()], then the behavior is undefined.
-**
-** These routines attempt to convert the value where appropriate. For
-** example, if the internal representation is FLOAT and a text result
-** is requested, [sqlite3_snprintf()] is used internally to perform the
-** conversion automatically. The following table details the conversions
-** that are applied:
-**
-** <blockquote>
-** <table border="1">
-** <tr><th> Internal<br>Type <th> Requested<br>Type <th> Conversion
-**
-** <tr><td> NULL <td> INTEGER <td> Result is 0
-** <tr><td> NULL <td> FLOAT <td> Result is 0.0
-** <tr><td> NULL <td> TEXT <td> Result is NULL pointer
-** <tr><td> NULL <td> BLOB <td> Result is NULL pointer
-** <tr><td> INTEGER <td> FLOAT <td> Convert from integer to float
-** <tr><td> INTEGER <td> TEXT <td> ASCII rendering of the integer
-** <tr><td> INTEGER <td> BLOB <td> Same as INTEGER->TEXT
-** <tr><td> FLOAT <td> INTEGER <td> Convert from float to integer
-** <tr><td> FLOAT <td> TEXT <td> ASCII rendering of the float
-** <tr><td> FLOAT <td> BLOB <td> Same as FLOAT->TEXT
-** <tr><td> TEXT <td> INTEGER <td> Use atoi()
-** <tr><td> TEXT <td> FLOAT <td> Use atof()
-** <tr><td> TEXT <td> BLOB <td> No change
-** <tr><td> BLOB <td> INTEGER <td> Convert to TEXT then use atoi()
-** <tr><td> BLOB <td> FLOAT <td> Convert to TEXT then use atof()
-** <tr><td> BLOB <td> TEXT <td> Add a zero terminator if needed
-** </table>
-** </blockquote>
-**
-** The table above makes reference to standard C library functions atoi()
-** and atof(). SQLite does not really use these functions. It has its
-** own equivalent internal routines. The atoi() and atof() names are
-** used in the table for brevity and because they are familiar to most
-** C programmers.
-**
-** Note that when type conversions occur, pointers returned by prior
-** calls to sqlite3_column_blob(), sqlite3_column_text(), and/or
-** sqlite3_column_text16() may be invalidated.
-** Type conversions and pointer invalidations might occur
-** in the following cases:
-**
-** <ul>
-** <li> The initial content is a BLOB and sqlite3_column_text() or
-** sqlite3_column_text16() is called. A zero-terminator might
-** need to be added to the string.</li>
-** <li> The initial content is UTF-8 text and sqlite3_column_bytes16() or
-** sqlite3_column_text16() is called. The content must be converted
-** to UTF-16.</li>
-** <li> The initial content is UTF-16 text and sqlite3_column_bytes() or
-** sqlite3_column_text() is called. The content must be converted
-** to UTF-8.</li>
-** </ul>
-**
-** Conversions between UTF-16be and UTF-16le are always done in place and do
-** not invalidate a prior pointer, though of course the content of the buffer
-** that the prior pointer points to will have been modified. Other kinds
-** of conversion are done in place when it is possible, but sometimes they
-** are not possible and in those cases prior pointers are invalidated.
-**
-** The safest and easiest to remember policy is to invoke these routines
-** in one of the following ways:
-**
-** <ul>
-** <li>sqlite3_column_text() followed by sqlite3_column_bytes()</li>
-** <li>sqlite3_column_blob() followed by sqlite3_column_bytes()</li>
-** <li>sqlite3_column_text16() followed by sqlite3_column_bytes16()</li>
-** </ul>
-**
-** In other words, you should call sqlite3_column_text(),
-** sqlite3_column_blob(), or sqlite3_column_text16() first to force the result
-** into the desired format, then invoke sqlite3_column_bytes() or
-** sqlite3_column_bytes16() to find the size of the result. Do not mix calls
-** to sqlite3_column_text() or sqlite3_column_blob() with calls to
-** sqlite3_column_bytes16(), and do not mix calls to sqlite3_column_text16()
-** with calls to sqlite3_column_bytes().
-**
-** The pointers returned are valid until a type conversion occurs as
-** described above, or until [sqlite3_step()] or [sqlite3_reset()] or
-** [sqlite3_finalize()] is called. The memory space used to hold strings
-** and BLOBs is freed automatically. Do <b>not</b> pass the pointers returned
-** [sqlite3_column_blob()], [sqlite3_column_text()], etc. into
-** [sqlite3_free()].
-**
-** If a memory allocation error occurs during the evaluation of any
-** of these routines, a default value is returned. The default value
-** is either the integer 0, the floating point number 0.0, or a NULL
-** pointer. Subsequent calls to [sqlite3_errcode()] will return
-** [SQLITE_NOMEM].
-**
-** Requirements:
-** [H13803] [H13806] [H13809] [H13812] [H13815] [H13818] [H13821] [H13824]
-** [H13827] [H13830]
-*/
-const void *sqlite3_column_blob(sqlite3_stmt*, int iCol);
-int sqlite3_column_bytes(sqlite3_stmt*, int iCol);
-int sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
-double sqlite3_column_double(sqlite3_stmt*, int iCol);
-int sqlite3_column_int(sqlite3_stmt*, int iCol);
-sqlite3_int64 sqlite3_column_int64(sqlite3_stmt*, int iCol);
-const unsigned char *sqlite3_column_text(sqlite3_stmt*, int iCol);
-const void *sqlite3_column_text16(sqlite3_stmt*, int iCol);
-int sqlite3_column_type(sqlite3_stmt*, int iCol);
-sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol);
-
-/*
-** CAPI3REF: Destroy A Prepared Statement Object {H13300} <S70300><S30100>
-**
-** The sqlite3_finalize() function is called to delete a [prepared statement].
-** If the statement was executed successfully or not executed at all, then
-** SQLITE_OK is returned. If execution of the statement failed then an
-** [error code] or [extended error code] is returned.
-**
-** This routine can be called at any point during the execution of the
-** [prepared statement]. If the virtual machine has not
-** completed execution when this routine is called, that is like
-** encountering an error or an [sqlite3_interrupt | interrupt].
-** Incomplete updates may be rolled back and transactions canceled,
-** depending on the circumstances, and the
-** [error code] returned will be [SQLITE_ABORT].
-**
-** Requirements:
-** [H11302] [H11304]
-*/
-int sqlite3_finalize(sqlite3_stmt *pStmt);
-
-/*
-** CAPI3REF: Reset A Prepared Statement Object {H13330} <S70300>
-**
-** The sqlite3_reset() function is called to reset a [prepared statement]
-** object back to its initial state, ready to be re-executed.
-** Any SQL statement variables that had values bound to them using
-** the [sqlite3_bind_blob | sqlite3_bind_*() API] retain their values.
-** Use [sqlite3_clear_bindings()] to reset the bindings.
-**
-** {H11332} The [sqlite3_reset(S)] interface resets the [prepared statement] S
-** back to the beginning of its program.
-**
-** {H11334} If the most recent call to [sqlite3_step(S)] for the
-** [prepared statement] S returned [SQLITE_ROW] or [SQLITE_DONE],
-** or if [sqlite3_step(S)] has never before been called on S,
-** then [sqlite3_reset(S)] returns [SQLITE_OK].
-**
-** {H11336} If the most recent call to [sqlite3_step(S)] for the
-** [prepared statement] S indicated an error, then
-** [sqlite3_reset(S)] returns an appropriate [error code].
-**
-** {H11338} The [sqlite3_reset(S)] interface does not change the values
-** of any [sqlite3_bind_blob|bindings] on the [prepared statement] S.
-*/
-int sqlite3_reset(sqlite3_stmt *pStmt);
-
-/*
-** CAPI3REF: Create Or Redefine SQL Functions {H16100} <S20200>
-** KEYWORDS: {function creation routines}
-** KEYWORDS: {application-defined SQL function}
-** KEYWORDS: {application-defined SQL functions}
-**
-** These two functions (collectively known as "function creation routines")
-** are used to add SQL functions or aggregates or to redefine the behavior
-** of existing SQL functions or aggregates. The only difference between the
-** two is that the second parameter, the name of the (scalar) function or
-** aggregate, is encoded in UTF-8 for sqlite3_create_function() and UTF-16
-** for sqlite3_create_function16().
-**
-** The first parameter is the [database connection] to which the SQL
-** function is to be added. If a single program uses more than one database
-** connection internally, then SQL functions must be added individually to
-** each database connection.
-**
-** The second parameter is the name of the SQL function to be created or
-** redefined. The length of the name is limited to 255 bytes, exclusive of
-** the zero-terminator. Note that the name length limit is in bytes, not
-** characters. Any attempt to create a function with a longer name
-** will result in [SQLITE_ERROR] being returned.
-**
-** The third parameter (nArg)
-** is the number of arguments that the SQL function or
-** aggregate takes. If this parameter is negative, then the SQL function or
-** aggregate may take any number of arguments.
-**
-** The fourth parameter, eTextRep, specifies what
-** [SQLITE_UTF8 | text encoding] this SQL function prefers for
-** its parameters. Any SQL function implementation should be able to work
-** work with UTF-8, UTF-16le, or UTF-16be. But some implementations may be
-** more efficient with one encoding than another. It is allowed to
-** invoke sqlite3_create_function() or sqlite3_create_function16() multiple
-** times with the same function but with different values of eTextRep.
-** When multiple implementations of the same function are available, SQLite
-** will pick the one that involves the least amount of data conversion.
-** If there is only a single implementation which does not care what text
-** encoding is used, then the fourth argument should be [SQLITE_ANY].
-**
-** The fifth parameter is an arbitrary pointer. The implementation of the
-** function can gain access to this pointer using [sqlite3_user_data()].
-**
-** The seventh, eighth and ninth parameters, xFunc, xStep and xFinal, are
-** pointers to C-language functions that implement the SQL function or
-** aggregate. A scalar SQL function requires an implementation of the xFunc
-** callback only, NULL pointers should be passed as the xStep and xFinal
-** parameters. An aggregate SQL function requires an implementation of xStep
-** and xFinal and NULL should be passed for xFunc. To delete an existing
-** SQL function or aggregate, pass NULL for all three function callbacks.
-**
-** It is permitted to register multiple implementations of the same
-** functions with the same name but with either differing numbers of
-** arguments or differing preferred text encodings. SQLite will use
-** the implementation most closely matches the way in which the
-** SQL function is used. A function implementation with a non-negative
-** nArg parameter is a better match than a function implementation with
-** a negative nArg. A function where the preferred text encoding
-** matches the database encoding is a better
-** match than a function where the encoding is different.
-** A function where the encoding difference is between UTF16le and UTF16be
-** is a closer match than a function where the encoding difference is
-** between UTF8 and UTF16.
-**
-** Built-in functions may be overloaded by new application-defined functions.
-** The first application-defined function with a given name overrides all
-** built-in functions in the same [database connection] with the same name.
-** Subsequent application-defined functions of the same name only override
-** prior application-defined functions that are an exact match for the
-** number of parameters and preferred encoding.
-**
-** An application-defined function is permitted to call other
-** SQLite interfaces. However, such calls must not
-** close the database connection nor finalize or reset the prepared
-** statement in which the function is running.
-**
-** Requirements:
-** [H16103] [H16106] [H16109] [H16112] [H16118] [H16121] [H16124] [H16127]
-** [H16130] [H16133] [H16136] [H16139] [H16142]
-*/
-int sqlite3_create_function(
- sqlite3 *db,
- const char *zFunctionName,
- int nArg,
- int eTextRep,
- void *pApp,
- void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
- void (*xStep)(sqlite3_context*,int,sqlite3_value**),
- void (*xFinal)(sqlite3_context*)
-);
-int sqlite3_create_function16(
- sqlite3 *db,
- const void *zFunctionName,
- int nArg,
- int eTextRep,
- void *pApp,
- void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
- void (*xStep)(sqlite3_context*,int,sqlite3_value**),
- void (*xFinal)(sqlite3_context*)
-);
-
-/*
-** CAPI3REF: Text Encodings {H10267} <S50200> <H16100>
-**
-** These constant define integer codes that represent the various
-** text encodings supported by SQLite.
-*/
-#define SQLITE_UTF8 1
-#define SQLITE_UTF16LE 2
-#define SQLITE_UTF16BE 3
-#define SQLITE_UTF16 4 /* Use native byte order */
-#define SQLITE_ANY 5 /* sqlite3_create_function only */
-#define SQLITE_UTF16_ALIGNED 8 /* sqlite3_create_collation only */
-
-/*
-** CAPI3REF: Deprecated Functions
-** DEPRECATED
-**
-** These functions are [deprecated]. In order to maintain
-** backwards compatibility with older code, these functions continue
-** to be supported. However, new applications should avoid
-** the use of these functions. To help encourage people to avoid
-** using these functions, we are not going to tell you what they do.
-*/
-#ifndef SQLITE_OMIT_DEPRECATED
-SQLITE_DEPRECATED int sqlite3_aggregate_count(sqlite3_context*);
-SQLITE_DEPRECATED int sqlite3_expired(sqlite3_stmt*);
-SQLITE_DEPRECATED int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
-SQLITE_DEPRECATED int sqlite3_global_recover(void);
-SQLITE_DEPRECATED void sqlite3_thread_cleanup(void);
-SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),void*,sqlite3_int64);
-#endif
-
-/*
-** CAPI3REF: Obtaining SQL Function Parameter Values {H15100} <S20200>
-**
-** The C-language implementation of SQL functions and aggregates uses
-** this set of interface routines to access the parameter values on
-** the function or aggregate.
-**
-** The xFunc (for scalar functions) or xStep (for aggregates) parameters
-** to [sqlite3_create_function()] and [sqlite3_create_function16()]
-** define callbacks that implement the SQL functions and aggregates.
-** The 4th parameter to these callbacks is an array of pointers to
-** [protected sqlite3_value] objects. There is one [sqlite3_value] object for
-** each parameter to the SQL function. These routines are used to
-** extract values from the [sqlite3_value] objects.
-**
-** These routines work only with [protected sqlite3_value] objects.
-** Any attempt to use these routines on an [unprotected sqlite3_value]
-** object results in undefined behavior.
-**
-** These routines work just like the corresponding [column access functions]
-** except that these routines take a single [protected sqlite3_value] object
-** pointer instead of a [sqlite3_stmt*] pointer and an integer column number.
-**
-** The sqlite3_value_text16() interface extracts a UTF-16 string
-** in the native byte-order of the host machine. The
-** sqlite3_value_text16be() and sqlite3_value_text16le() interfaces
-** extract UTF-16 strings as big-endian and little-endian respectively.
-**
-** The sqlite3_value_numeric_type() interface attempts to apply
-** numeric affinity to the value. This means that an attempt is
-** made to convert the value to an integer or floating point. If
-** such a conversion is possible without loss of information (in other
-** words, if the value is a string that looks like a number)
-** then the conversion is performed. Otherwise no conversion occurs.
-** The [SQLITE_INTEGER | datatype] after conversion is returned.
-**
-** Please pay particular attention to the fact that the pointer returned
-** from [sqlite3_value_blob()], [sqlite3_value_text()], or
-** [sqlite3_value_text16()] can be invalidated by a subsequent call to
-** [sqlite3_value_bytes()], [sqlite3_value_bytes16()], [sqlite3_value_text()],
-** or [sqlite3_value_text16()].
-**
-** These routines must be called from the same thread as
-** the SQL function that supplied the [sqlite3_value*] parameters.
-**
-** Requirements:
-** [H15103] [H15106] [H15109] [H15112] [H15115] [H15118] [H15121] [H15124]
-** [H15127] [H15130] [H15133] [H15136]
-*/
-const void *sqlite3_value_blob(sqlite3_value*);
-int sqlite3_value_bytes(sqlite3_value*);
-int sqlite3_value_bytes16(sqlite3_value*);
-double sqlite3_value_double(sqlite3_value*);
-int sqlite3_value_int(sqlite3_value*);
-sqlite3_int64 sqlite3_value_int64(sqlite3_value*);
-const unsigned char *sqlite3_value_text(sqlite3_value*);
-const void *sqlite3_value_text16(sqlite3_value*);
-const void *sqlite3_value_text16le(sqlite3_value*);
-const void *sqlite3_value_text16be(sqlite3_value*);
-int sqlite3_value_type(sqlite3_value*);
-int sqlite3_value_numeric_type(sqlite3_value*);
-
-/*
-** CAPI3REF: Obtain Aggregate Function Context {H16210} <S20200>
-**
-** The implementation of aggregate SQL functions use this routine to allocate
-** a structure for storing their state.
-**
-** The first time the sqlite3_aggregate_context() routine is called for a
-** particular aggregate, SQLite allocates nBytes of memory, zeroes out that
-** memory, and returns a pointer to it. On second and subsequent calls to
-** sqlite3_aggregate_context() for the same aggregate function index,
-** the same buffer is returned. The implementation of the aggregate can use
-** the returned buffer to accumulate data.
-**
-** SQLite automatically frees the allocated buffer when the aggregate
-** query concludes.
-**
-** The first parameter should be a copy of the
-** [sqlite3_context | SQL function context] that is the first parameter
-** to the callback routine that implements the aggregate function.
-**
-** This routine must be called from the same thread in which
-** the aggregate SQL function is running.
-**
-** Requirements:
-** [H16211] [H16213] [H16215] [H16217]
-*/
-void *sqlite3_aggregate_context(sqlite3_context*, int nBytes);
-
-/*
-** CAPI3REF: User Data For Functions {H16240} <S20200>
-**
-** The sqlite3_user_data() interface returns a copy of
-** the pointer that was the pUserData parameter (the 5th parameter)
-** of the [sqlite3_create_function()]
-** and [sqlite3_create_function16()] routines that originally
-** registered the application defined function. {END}
-**
-** This routine must be called from the same thread in which
-** the application-defined function is running.
-**
-** Requirements:
-** [H16243]
-*/
-void *sqlite3_user_data(sqlite3_context*);
-
-/*
-** CAPI3REF: Database Connection For Functions {H16250} <S60600><S20200>
-**
-** The sqlite3_context_db_handle() interface returns a copy of
-** the pointer to the [database connection] (the 1st parameter)
-** of the [sqlite3_create_function()]
-** and [sqlite3_create_function16()] routines that originally
-** registered the application defined function.
-**
-** Requirements:
-** [H16253]
-*/
-sqlite3 *sqlite3_context_db_handle(sqlite3_context*);
-
-/*
-** CAPI3REF: Function Auxiliary Data {H16270} <S20200>
-**
-** The following two functions may be used by scalar SQL functions to
-** associate metadata with argument values. If the same value is passed to
-** multiple invocations of the same SQL function during query execution, under
-** some circumstances the associated metadata may be preserved. This may
-** be used, for example, to add a regular-expression matching scalar
-** function. The compiled version of the regular expression is stored as
-** metadata associated with the SQL value passed as the regular expression
-** pattern. The compiled regular expression can be reused on multiple
-** invocations of the same function so that the original pattern string
-** does not need to be recompiled on each invocation.
-**
-** The sqlite3_get_auxdata() interface returns a pointer to the metadata
-** associated by the sqlite3_set_auxdata() function with the Nth argument
-** value to the application-defined function. If no metadata has been ever
-** been set for the Nth argument of the function, or if the corresponding
-** function parameter has changed since the meta-data was set,
-** then sqlite3_get_auxdata() returns a NULL pointer.
-**
-** The sqlite3_set_auxdata() interface saves the metadata
-** pointed to by its 3rd parameter as the metadata for the N-th
-** argument of the application-defined function. Subsequent
-** calls to sqlite3_get_auxdata() might return this data, if it has
-** not been destroyed.
-** If it is not NULL, SQLite will invoke the destructor
-** function given by the 4th parameter to sqlite3_set_auxdata() on
-** the metadata when the corresponding function parameter changes
-** or when the SQL statement completes, whichever comes first.
-**
-** SQLite is free to call the destructor and drop metadata on any
-** parameter of any function at any time. The only guarantee is that
-** the destructor will be called before the metadata is dropped.
-**
-** In practice, metadata is preserved between function calls for
-** expressions that are constant at compile time. This includes literal
-** values and SQL variables.
-**
-** These routines must be called from the same thread in which
-** the SQL function is running.
-**
-** Requirements:
-** [H16272] [H16274] [H16276] [H16277] [H16278] [H16279]
-*/
-void *sqlite3_get_auxdata(sqlite3_context*, int N);
-void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
-
-
-/*
-** CAPI3REF: Constants Defining Special Destructor Behavior {H10280} <S30100>
-**
-** These are special values for the destructor that is passed in as the
-** final argument to routines like [sqlite3_result_blob()]. If the destructor
-** argument is SQLITE_STATIC, it means that the content pointer is constant
-** and will never change. It does not need to be destroyed. The
-** SQLITE_TRANSIENT value means that the content will likely change in
-** the near future and that SQLite should make its own private copy of
-** the content before returning.
-**
-** The typedef is necessary to work around problems in certain
-** C++ compilers. See ticket #2191.
-*/
-typedef void (*sqlite3_destructor_type)(void*);
-#define SQLITE_STATIC ((sqlite3_destructor_type)0)
-#define SQLITE_TRANSIENT ((sqlite3_destructor_type)-1)
-
-/*
-** CAPI3REF: Setting The Result Of An SQL Function {H16400} <S20200>
-**
-** These routines are used by the xFunc or xFinal callbacks that
-** implement SQL functions and aggregates. See
-** [sqlite3_create_function()] and [sqlite3_create_function16()]
-** for additional information.
-**
-** These functions work very much like the [parameter binding] family of
-** functions used to bind values to host parameters in prepared statements.
-** Refer to the [SQL parameter] documentation for additional information.
-**
-** The sqlite3_result_blob() interface sets the result from
-** an application-defined function to be the BLOB whose content is pointed
-** to by the second parameter and which is N bytes long where N is the
-** third parameter.
-**
-** The sqlite3_result_zeroblob() interfaces set the result of
-** the application-defined function to be a BLOB containing all zero
-** bytes and N bytes in size, where N is the value of the 2nd parameter.
-**
-** The sqlite3_result_double() interface sets the result from
-** an application-defined function to be a floating point value specified
-** by its 2nd argument.
-**
-** The sqlite3_result_error() and sqlite3_result_error16() functions
-** cause the implemented SQL function to throw an exception.
-** SQLite uses the string pointed to by the
-** 2nd parameter of sqlite3_result_error() or sqlite3_result_error16()
-** as the text of an error message. SQLite interprets the error
-** message string from sqlite3_result_error() as UTF-8. SQLite
-** interprets the string from sqlite3_result_error16() as UTF-16 in native
-** byte order. If the third parameter to sqlite3_result_error()
-** or sqlite3_result_error16() is negative then SQLite takes as the error
-** message all text up through the first zero character.
-** If the third parameter to sqlite3_result_error() or
-** sqlite3_result_error16() is non-negative then SQLite takes that many
-** bytes (not characters) from the 2nd parameter as the error message.
-** The sqlite3_result_error() and sqlite3_result_error16()
-** routines make a private copy of the error message text before
-** they return. Hence, the calling function can deallocate or
-** modify the text after they return without harm.
-** The sqlite3_result_error_code() function changes the error code
-** returned by SQLite as a result of an error in a function. By default,
-** the error code is SQLITE_ERROR. A subsequent call to sqlite3_result_error()
-** or sqlite3_result_error16() resets the error code to SQLITE_ERROR.
-**
-** The sqlite3_result_toobig() interface causes SQLite to throw an error
-** indicating that a string or BLOB is to long to represent.
-**
-** The sqlite3_result_nomem() interface causes SQLite to throw an error
-** indicating that a memory allocation failed.
-**
-** The sqlite3_result_int() interface sets the return value
-** of the application-defined function to be the 32-bit signed integer
-** value given in the 2nd argument.
-** The sqlite3_result_int64() interface sets the return value
-** of the application-defined function to be the 64-bit signed integer
-** value given in the 2nd argument.
-**
-** The sqlite3_result_null() interface sets the return value
-** of the application-defined function to be NULL.
-**
-** The sqlite3_result_text(), sqlite3_result_text16(),
-** sqlite3_result_text16le(), and sqlite3_result_text16be() interfaces
-** set the return value of the application-defined function to be
-** a text string which is represented as UTF-8, UTF-16 native byte order,
-** UTF-16 little endian, or UTF-16 big endian, respectively.
-** SQLite takes the text result from the application from
-** the 2nd parameter of the sqlite3_result_text* interfaces.
-** If the 3rd parameter to the sqlite3_result_text* interfaces
-** is negative, then SQLite takes result text from the 2nd parameter
-** through the first zero character.
-** If the 3rd parameter to the sqlite3_result_text* interfaces
-** is non-negative, then as many bytes (not characters) of the text
-** pointed to by the 2nd parameter are taken as the application-defined
-** function result.
-** If the 4th parameter to the sqlite3_result_text* interfaces
-** or sqlite3_result_blob is a non-NULL pointer, then SQLite calls that
-** function as the destructor on the text or BLOB result when it has
-** finished using that result.
-** If the 4th parameter to the sqlite3_result_text* interfaces or
-** sqlite3_result_blob is the special constant SQLITE_STATIC, then SQLite
-** assumes that the text or BLOB result is in constant space and does not
-** copy the it or call a destructor when it has finished using that result.
-** If the 4th parameter to the sqlite3_result_text* interfaces
-** or sqlite3_result_blob is the special constant SQLITE_TRANSIENT
-** then SQLite makes a copy of the result into space obtained from
-** from [sqlite3_malloc()] before it returns.
-**
-** The sqlite3_result_value() interface sets the result of
-** the application-defined function to be a copy the
-** [unprotected sqlite3_value] object specified by the 2nd parameter. The
-** sqlite3_result_value() interface makes a copy of the [sqlite3_value]
-** so that the [sqlite3_value] specified in the parameter may change or
-** be deallocated after sqlite3_result_value() returns without harm.
-** A [protected sqlite3_value] object may always be used where an
-** [unprotected sqlite3_value] object is required, so either
-** kind of [sqlite3_value] object can be used with this interface.
-**
-** If these routines are called from within the different thread
-** than the one containing the application-defined function that received
-** the [sqlite3_context] pointer, the results are undefined.
-**
-** Requirements:
-** [H16403] [H16406] [H16409] [H16412] [H16415] [H16418] [H16421] [H16424]
-** [H16427] [H16430] [H16433] [H16436] [H16439] [H16442] [H16445] [H16448]
-** [H16451] [H16454] [H16457] [H16460] [H16463]
-*/
-void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
-void sqlite3_result_double(sqlite3_context*, double);
-void sqlite3_result_error(sqlite3_context*, const char*, int);
-void sqlite3_result_error16(sqlite3_context*, const void*, int);
-void sqlite3_result_error_toobig(sqlite3_context*);
-void sqlite3_result_error_nomem(sqlite3_context*);
-void sqlite3_result_error_code(sqlite3_context*, int);
-void sqlite3_result_int(sqlite3_context*, int);
-void sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
-void sqlite3_result_null(sqlite3_context*);
-void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
-void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
-void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
-void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
-void sqlite3_result_value(sqlite3_context*, sqlite3_value*);
-void sqlite3_result_zeroblob(sqlite3_context*, int n);
-
-/*
-** CAPI3REF: Define New Collating Sequences {H16600} <S20300>
-**
-** These functions are used to add new collation sequences to the
-** [database connection] specified as the first argument.
-**
-** The name of the new collation sequence is specified as a UTF-8 string
-** for sqlite3_create_collation() and sqlite3_create_collation_v2()
-** and a UTF-16 string for sqlite3_create_collation16(). In all cases
-** the name is passed as the second function argument.
-**
-** The third argument may be one of the constants [SQLITE_UTF8],
-** [SQLITE_UTF16LE], or [SQLITE_UTF16BE], indicating that the user-supplied
-** routine expects to be passed pointers to strings encoded using UTF-8,
-** UTF-16 little-endian, or UTF-16 big-endian, respectively. The
-** third argument might also be [SQLITE_UTF16] to indicate that the routine
-** expects pointers to be UTF-16 strings in the native byte order, or the
-** argument can be [SQLITE_UTF16_ALIGNED] if the
-** the routine expects pointers to 16-bit word aligned strings
-** of UTF-16 in the native byte order.
-**
-** A pointer to the user supplied routine must be passed as the fifth
-** argument. If it is NULL, this is the same as deleting the collation
-** sequence (so that SQLite cannot call it anymore).
-** Each time the application supplied function is invoked, it is passed
-** as its first parameter a copy of the void* passed as the fourth argument
-** to sqlite3_create_collation() or sqlite3_create_collation16().
-**
-** The remaining arguments to the application-supplied routine are two strings,
-** each represented by a (length, data) pair and encoded in the encoding
-** that was passed as the third argument when the collation sequence was
-** registered. {END} The application defined collation routine should
-** return negative, zero or positive if the first string is less than,
-** equal to, or greater than the second string. i.e. (STRING1 - STRING2).
-**
-** The sqlite3_create_collation_v2() works like sqlite3_create_collation()
-** except that it takes an extra argument which is a destructor for
-** the collation. The destructor is called when the collation is
-** destroyed and is passed a copy of the fourth parameter void* pointer
-** of the sqlite3_create_collation_v2().
-** Collations are destroyed when they are overridden by later calls to the
-** collation creation functions or when the [database connection] is closed
-** using [sqlite3_close()].
-**
-** See also: [sqlite3_collation_needed()] and [sqlite3_collation_needed16()].
-**
-** Requirements:
-** [H16603] [H16604] [H16606] [H16609] [H16612] [H16615] [H16618] [H16621]
-** [H16624] [H16627] [H16630]
-*/
-int sqlite3_create_collation(
- sqlite3*,
- const char *zName,
- int eTextRep,
- void*,
- int(*xCompare)(void*,int,const void*,int,const void*)
-);
-int sqlite3_create_collation_v2(
- sqlite3*,
- const char *zName,
- int eTextRep,
- void*,
- int(*xCompare)(void*,int,const void*,int,const void*),
- void(*xDestroy)(void*)
-);
-int sqlite3_create_collation16(
- sqlite3*,
- const void *zName,
- int eTextRep,
- void*,
- int(*xCompare)(void*,int,const void*,int,const void*)
-);
-
-/*
-** CAPI3REF: Collation Needed Callbacks {H16700} <S20300>
-**
-** To avoid having to register all collation sequences before a database
-** can be used, a single callback function may be registered with the
-** [database connection] to be called whenever an undefined collation
-** sequence is required.
-**
-** If the function is registered using the sqlite3_collation_needed() API,
-** then it is passed the names of undefined collation sequences as strings
-** encoded in UTF-8. {H16703} If sqlite3_collation_needed16() is used,
-** the names are passed as UTF-16 in machine native byte order.
-** A call to either function replaces any existing callback.
-**
-** When the callback is invoked, the first argument passed is a copy
-** of the second argument to sqlite3_collation_needed() or
-** sqlite3_collation_needed16(). The second argument is the database
-** connection. The third argument is one of [SQLITE_UTF8], [SQLITE_UTF16BE],
-** or [SQLITE_UTF16LE], indicating the most desirable form of the collation
-** sequence function required. The fourth parameter is the name of the
-** required collation sequence.
-**
-** The callback function should register the desired collation using
-** [sqlite3_create_collation()], [sqlite3_create_collation16()], or
-** [sqlite3_create_collation_v2()].
-**
-** Requirements:
-** [H16702] [H16704] [H16706]
-*/
-int sqlite3_collation_needed(
- sqlite3*,
- void*,
- void(*)(void*,sqlite3*,int eTextRep,const char*)
-);
-int sqlite3_collation_needed16(
- sqlite3*,
- void*,
- void(*)(void*,sqlite3*,int eTextRep,const void*)
-);
-
-/*
-** Specify the key for an encrypted database. This routine should be
-** called right after sqlite3_open().
-**
-** The code to implement this API is not available in the public release
-** of SQLite.
-*/
-int sqlite3_key(
- sqlite3 *db, /* Database to be rekeyed */
- const void *pKey, int nKey /* The key */
-);
-
-/*
-** Change the key on an open database. If the current database is not
-** encrypted, this routine will encrypt it. If pNew==0 or nNew==0, the
-** database is decrypted.
-**
-** The code to implement this API is not available in the public release
-** of SQLite.
-*/
-int sqlite3_rekey(
- sqlite3 *db, /* Database to be rekeyed */
- const void *pKey, int nKey /* The new key */
-);
-
-/*
-** CAPI3REF: Suspend Execution For A Short Time {H10530} <S40410>
-**
-** The sqlite3_sleep() function causes the current thread to suspend execution
-** for at least a number of milliseconds specified in its parameter.
-**
-** If the operating system does not support sleep requests with
-** millisecond time resolution, then the time will be rounded up to
-** the nearest second. The number of milliseconds of sleep actually
-** requested from the operating system is returned.
-**
-** SQLite implements this interface by calling the xSleep()
-** method of the default [sqlite3_vfs] object.
-**
-** Requirements: [H10533] [H10536]
-*/
-int sqlite3_sleep(int);
-
-/*
-** CAPI3REF: Name Of The Folder Holding Temporary Files {H10310} <S20000>
-**
-** If this global variable is made to point to a string which is
-** the name of a folder (a.k.a. directory), then all temporary files
-** created by SQLite will be placed in that directory. If this variable
-** is a NULL pointer, then SQLite performs a search for an appropriate
-** temporary file directory.
-**
-** It is not safe to read or modify this variable in more than one
-** thread at a time. It is not safe to read or modify this variable
-** if a [database connection] is being used at the same time in a separate
-** thread.
-** It is intended that this variable be set once
-** as part of process initialization and before any SQLite interface
-** routines have been called and that this variable remain unchanged
-** thereafter.
-**
-** The [temp_store_directory pragma] may modify this variable and cause
-** it to point to memory obtained from [sqlite3_malloc]. Furthermore,
-** the [temp_store_directory pragma] always assumes that any string
-** that this variable points to is held in memory obtained from
-** [sqlite3_malloc] and the pragma may attempt to free that memory
-** using [sqlite3_free].
-** Hence, if this variable is modified directly, either it should be
-** made NULL or made to point to memory obtained from [sqlite3_malloc]
-** or else the use of the [temp_store_directory pragma] should be avoided.
-*/
-SQLITE_EXTERN char *sqlite3_temp_directory;
-
-/*
-** CAPI3REF: Test For Auto-Commit Mode {H12930} <S60200>
-** KEYWORDS: {autocommit mode}
-**
-** The sqlite3_get_autocommit() interface returns non-zero or
-** zero if the given database connection is or is not in autocommit mode,
-** respectively. Autocommit mode is on by default.
-** Autocommit mode is disabled by a [BEGIN] statement.
-** Autocommit mode is re-enabled by a [COMMIT] or [ROLLBACK].
-**
-** If certain kinds of errors occur on a statement within a multi-statement
-** transaction (errors including [SQLITE_FULL], [SQLITE_IOERR],
-** [SQLITE_NOMEM], [SQLITE_BUSY], and [SQLITE_INTERRUPT]) then the
-** transaction might be rolled back automatically. The only way to
-** find out whether SQLite automatically rolled back the transaction after
-** an error is to use this function.
-**
-** If another thread changes the autocommit status of the database
-** connection while this routine is running, then the return value
-** is undefined.
-**
-** Requirements: [H12931] [H12932] [H12933] [H12934]
-*/
-int sqlite3_get_autocommit(sqlite3*);
-
-/*
-** CAPI3REF: Find The Database Handle Of A Prepared Statement {H13120} <S60600>
-**
-** The sqlite3_db_handle interface returns the [database connection] handle
-** to which a [prepared statement] belongs. The [database connection]
-** returned by sqlite3_db_handle is the same [database connection] that was the first argument
-** to the [sqlite3_prepare_v2()] call (or its variants) that was used to
-** create the statement in the first place.
-**
-** Requirements: [H13123]
-*/
-sqlite3 *sqlite3_db_handle(sqlite3_stmt*);
-
-/*
-** CAPI3REF: Find the next prepared statement {H13140} <S60600>
-**
-** This interface returns a pointer to the next [prepared statement] after
-** pStmt associated with the [database connection] pDb. If pStmt is NULL
-** then this interface returns a pointer to the first prepared statement
-** associated with the database connection pDb. If no prepared statement
-** satisfies the conditions of this routine, it returns NULL.
-**
-** The [database connection] pointer D in a call to
-** [sqlite3_next_stmt(D,S)] must refer to an open database
-** connection and in particular must not be a NULL pointer.
-**
-** Requirements: [H13143] [H13146] [H13149] [H13152]
-*/
-sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
-
-/*
-** CAPI3REF: Commit And Rollback Notification Callbacks {H12950} <S60400>
-**
-** The sqlite3_commit_hook() interface registers a callback
-** function to be invoked whenever a transaction is committed.
-** Any callback set by a previous call to sqlite3_commit_hook()
-** for the same database connection is overridden.
-** The sqlite3_rollback_hook() interface registers a callback
-** function to be invoked whenever a transaction is committed.
-** Any callback set by a previous call to sqlite3_commit_hook()
-** for the same database connection is overridden.
-** The pArg argument is passed through to the callback.
-** If the callback on a commit hook function returns non-zero,
-** then the commit is converted into a rollback.
-**
-** If another function was previously registered, its
-** pArg value is returned. Otherwise NULL is returned.
-**
-** The callback implementation must not do anything that will modify
-** the database connection that invoked the callback. Any actions
-** to modify the database connection must be deferred until after the
-** completion of the [sqlite3_step()] call that triggered the commit
-** or rollback hook in the first place.
-** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
-** database connections for the meaning of "modify" in this paragraph.
-**
-** Registering a NULL function disables the callback.
-**
-** For the purposes of this API, a transaction is said to have been
-** rolled back if an explicit "ROLLBACK" statement is executed, or
-** an error or constraint causes an implicit rollback to occur.
-** The rollback callback is not invoked if a transaction is
-** automatically rolled back because the database connection is closed.
-** The rollback callback is not invoked if a transaction is
-** rolled back because a commit callback returned non-zero.
-** <todo> Check on this </todo>
-**
-** Requirements:
-** [H12951] [H12952] [H12953] [H12954] [H12955]
-** [H12961] [H12962] [H12963] [H12964]
-*/
-void *sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
-void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
-
-/*
-** CAPI3REF: Data Change Notification Callbacks {H12970} <S60400>
-**
-** The sqlite3_update_hook() interface registers a callback function
-** with the [database connection] identified by the first argument
-** to be invoked whenever a row is updated, inserted or deleted.
-** Any callback set by a previous call to this function
-** for the same database connection is overridden.
-**
-** The second argument is a pointer to the function to invoke when a
-** row is updated, inserted or deleted.
-** The first argument to the callback is a copy of the third argument
-** to sqlite3_update_hook().
-** The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE],
-** or [SQLITE_UPDATE], depending on the operation that caused the callback
-** to be invoked.
-** The third and fourth arguments to the callback contain pointers to the
-** database and table name containing the affected row.
-** The final callback parameter is the [rowid] of the row.
-** In the case of an update, this is the [rowid] after the update takes place.
-**
-** The update hook is not invoked when internal system tables are
-** modified (i.e. sqlite_master and sqlite_sequence).
-**
-** The update hook implementation must not do anything that will modify
-** the database connection that invoked the update hook. Any actions
-** to modify the database connection must be deferred until after the
-** completion of the [sqlite3_step()] call that triggered the update hook.
-** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
-** database connections for the meaning of "modify" in this paragraph.
-**
-** If another function was previously registered, its pArg value
-** is returned. Otherwise NULL is returned.
-**
-** Requirements:
-** [H12971] [H12973] [H12975] [H12977] [H12979] [H12981] [H12983] [H12986]
-*/
-void *sqlite3_update_hook(
- sqlite3*,
- void(*)(void *,int ,char const *,char const *,sqlite3_int64),
- void*
-);
-
-/*
-** CAPI3REF: Enable Or Disable Shared Pager Cache {H10330} <S30900>
-** KEYWORDS: {shared cache} {shared cache mode}
-**
-** This routine enables or disables the sharing of the database cache
-** and schema data structures between [database connection | connections]
-** to the same database. Sharing is enabled if the argument is true
-** and disabled if the argument is false.
-**
-** Cache sharing is enabled and disabled for an entire process.
-** This is a change as of SQLite version 3.5.0. In prior versions of SQLite,
-** sharing was enabled or disabled for each thread separately.
-**
-** The cache sharing mode set by this interface effects all subsequent
-** calls to [sqlite3_open()], [sqlite3_open_v2()], and [sqlite3_open16()].
-** Existing database connections continue use the sharing mode
-** that was in effect at the time they were opened.
-**
-** Virtual tables cannot be used with a shared cache. When shared
-** cache is enabled, the [sqlite3_create_module()] API used to register
-** virtual tables will always return an error.
-**
-** This routine returns [SQLITE_OK] if shared cache was enabled or disabled
-** successfully. An [error code] is returned otherwise.
-**
-** Shared cache is disabled by default. But this might change in
-** future releases of SQLite. Applications that care about shared
-** cache setting should set it explicitly.
-**
-** See Also: [SQLite Shared-Cache Mode]
-**
-** Requirements: [H10331] [H10336] [H10337] [H10339]
-*/
-int sqlite3_enable_shared_cache(int);
-
-/*
-** CAPI3REF: Attempt To Free Heap Memory {H17340} <S30220>
-**
-** The sqlite3_release_memory() interface attempts to free N bytes
-** of heap memory by deallocating non-essential memory allocations
-** held by the database library. {END} Memory used to cache database
-** pages to improve performance is an example of non-essential memory.
-** sqlite3_release_memory() returns the number of bytes actually freed,
-** which might be more or less than the amount requested.
-**
-** Requirements: [H17341] [H17342]
-*/
-int sqlite3_release_memory(int);
-
-/*
-** CAPI3REF: Impose A Limit On Heap Size {H17350} <S30220>
-**
-** The sqlite3_soft_heap_limit() interface places a "soft" limit
-** on the amount of heap memory that may be allocated by SQLite.
-** If an internal allocation is requested that would exceed the
-** soft heap limit, [sqlite3_release_memory()] is invoked one or
-** more times to free up some space before the allocation is performed.
-**
-** The limit is called "soft", because if [sqlite3_release_memory()]
-** cannot free sufficient memory to prevent the limit from being exceeded,
-** the memory is allocated anyway and the current operation proceeds.
-**
-** A negative or zero value for N means that there is no soft heap limit and
-** [sqlite3_release_memory()] will only be called when memory is exhausted.
-** The default value for the soft heap limit is zero.
-**
-** SQLite makes a best effort to honor the soft heap limit.
-** But if the soft heap limit cannot be honored, execution will
-** continue without error or notification. This is why the limit is
-** called a "soft" limit. It is advisory only.
-**
-** Prior to SQLite version 3.5.0, this routine only constrained the memory
-** allocated by a single thread - the same thread in which this routine
-** runs. Beginning with SQLite version 3.5.0, the soft heap limit is
-** applied to all threads. The value specified for the soft heap limit
-** is an upper bound on the total memory allocation for all threads. In
-** version 3.5.0 there is no mechanism for limiting the heap usage for
-** individual threads.
-**
-** Requirements:
-** [H16351] [H16352] [H16353] [H16354] [H16355] [H16358]
-*/
-void sqlite3_soft_heap_limit(int);
-
-/*
-** CAPI3REF: Extract Metadata About A Column Of A Table {H12850} <S60300>
-**
-** This routine returns metadata about a specific column of a specific
-** database table accessible using the [database connection] handle
-** passed as the first function argument.
-**
-** The column is identified by the second, third and fourth parameters to
-** this function. The second parameter is either the name of the database
-** (i.e. "main", "temp" or an attached database) containing the specified
-** table or NULL. If it is NULL, then all attached databases are searched
-** for the table using the same algorithm used by the database engine to
-** resolve unqualified table references.
-**
-** The third and fourth parameters to this function are the table and column
-** name of the desired column, respectively. Neither of these parameters
-** may be NULL.
-**
-** Metadata is returned by writing to the memory locations passed as the 5th
-** and subsequent parameters to this function. Any of these arguments may be
-** NULL, in which case the corresponding element of metadata is omitted.
-**
-** <blockquote>
-** <table border="1">
-** <tr><th> Parameter <th> Output<br>Type <th> Description
-**
-** <tr><td> 5th <td> const char* <td> Data type
-** <tr><td> 6th <td> const char* <td> Name of default collation sequence
-** <tr><td> 7th <td> int <td> True if column has a NOT NULL constraint
-** <tr><td> 8th <td> int <td> True if column is part of the PRIMARY KEY
-** <tr><td> 9th <td> int <td> True if column is [AUTOINCREMENT]
-** </table>
-** </blockquote>
-**
-** The memory pointed to by the character pointers returned for the
-** declaration type and collation sequence is valid only until the next
-** call to any SQLite API function.
-**
-** If the specified table is actually a view, an [error code] is returned.
-**
-** If the specified column is "rowid", "oid" or "_rowid_" and an
-** [INTEGER PRIMARY KEY] column has been explicitly declared, then the output
-** parameters are set for the explicitly declared column. If there is no
-** explicitly declared [INTEGER PRIMARY KEY] column, then the output
-** parameters are set as follows:
-**
-** <pre>
-** data type: "INTEGER"
-** collation sequence: "BINARY"
-** not null: 0
-** primary key: 1
-** auto increment: 0
-** </pre>
-**
-** This function may load one or more schemas from database files. If an
-** error occurs during this process, or if the requested table or column
-** cannot be found, an [error code] is returned and an error message left
-** in the [database connection] (to be retrieved using sqlite3_errmsg()).
-**
-** This API is only available if the library was compiled with the
-** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol defined.
-*/
-int sqlite3_table_column_metadata(
- sqlite3 *db, /* Connection handle */
- const char *zDbName, /* Database name or NULL */
- const char *zTableName, /* Table name */
- const char *zColumnName, /* Column name */
- char const **pzDataType, /* OUTPUT: Declared data type */
- char const **pzCollSeq, /* OUTPUT: Collation sequence name */
- int *pNotNull, /* OUTPUT: True if NOT NULL constraint exists */
- int *pPrimaryKey, /* OUTPUT: True if column part of PK */
- int *pAutoinc /* OUTPUT: True if column is auto-increment */
-);
-
-/*
-** CAPI3REF: Load An Extension {H12600} <S20500>
-**
-** This interface loads an SQLite extension library from the named file.
-**
-** {H12601} The sqlite3_load_extension() interface attempts to load an
-** SQLite extension library contained in the file zFile.
-**
-** {H12602} The entry point is zProc.
-**
-** {H12603} zProc may be 0, in which case the name of the entry point
-** defaults to "sqlite3_extension_init".
-**
-** {H12604} The sqlite3_load_extension() interface shall return
-** [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong.
-**
-** {H12605} If an error occurs and pzErrMsg is not 0, then the
-** [sqlite3_load_extension()] interface shall attempt to
-** fill *pzErrMsg with error message text stored in memory
-** obtained from [sqlite3_malloc()]. {END} The calling function
-** should free this memory by calling [sqlite3_free()].
-**
-** {H12606} Extension loading must be enabled using
-** [sqlite3_enable_load_extension()] prior to calling this API,
-** otherwise an error will be returned.
-*/
-int sqlite3_load_extension(
- sqlite3 *db, /* Load the extension into this database connection */
- const char *zFile, /* Name of the shared library containing extension */
- const char *zProc, /* Entry point. Derived from zFile if 0 */
- char **pzErrMsg /* Put error message here if not 0 */
-);
-
-/*
-** CAPI3REF: Enable Or Disable Extension Loading {H12620} <S20500>
-**
-** So as not to open security holes in older applications that are
-** unprepared to deal with extension loading, and as a means of disabling
-** extension loading while evaluating user-entered SQL, the following API
-** is provided to turn the [sqlite3_load_extension()] mechanism on and off.
-**
-** Extension loading is off by default. See ticket #1863.
-**
-** {H12621} Call the sqlite3_enable_load_extension() routine with onoff==1
-** to turn extension loading on and call it with onoff==0 to turn
-** it back off again.
-**
-** {H12622} Extension loading is off by default.
-*/
-int sqlite3_enable_load_extension(sqlite3 *db, int onoff);
-
-/*
-** CAPI3REF: Automatically Load An Extensions {H12640} <S20500>
-**
-** This API can be invoked at program startup in order to register
-** one or more statically linked extensions that will be available
-** to all new [database connections]. {END}
-**
-** This routine stores a pointer to the extension in an array that is
-** obtained from [sqlite3_malloc()]. If you run a memory leak checker
-** on your program and it reports a leak because of this array, invoke
-** [sqlite3_reset_auto_extension()] prior to shutdown to free the memory.
-**
-** {H12641} This function registers an extension entry point that is
-** automatically invoked whenever a new [database connection]
-** is opened using [sqlite3_open()], [sqlite3_open16()],
-** or [sqlite3_open_v2()].
-**
-** {H12642} Duplicate extensions are detected so calling this routine
-** multiple times with the same extension is harmless.
-**
-** {H12643} This routine stores a pointer to the extension in an array
-** that is obtained from [sqlite3_malloc()].
-**
-** {H12644} Automatic extensions apply across all threads.
-*/
-int sqlite3_auto_extension(void (*xEntryPoint)(void));
-
-/*
-** CAPI3REF: Reset Automatic Extension Loading {H12660} <S20500>
-**
-** This function disables all previously registered automatic
-** extensions. {END} It undoes the effect of all prior
-** [sqlite3_auto_extension()] calls.
-**
-** {H12661} This function disables all previously registered
-** automatic extensions.
-**
-** {H12662} This function disables automatic extensions in all threads.
-*/
-void sqlite3_reset_auto_extension(void);
-
-/*
-****** EXPERIMENTAL - subject to change without notice **************
-**
-** The interface to the virtual-table mechanism is currently considered
-** to be experimental. The interface might change in incompatible ways.
-** If this is a problem for you, do not use the interface at this time.
-**
-** When the virtual-table mechanism stabilizes, we will declare the
-** interface fixed, support it indefinitely, and remove this comment.
-*/
-
-/*
-** Structures used by the virtual table interface
-*/
-typedef struct sqlite3_vtab sqlite3_vtab;
-typedef struct sqlite3_index_info sqlite3_index_info;
-typedef struct sqlite3_vtab_cursor sqlite3_vtab_cursor;
-typedef struct sqlite3_module sqlite3_module;
-
-/*
-** CAPI3REF: Virtual Table Object {H18000} <S20400>
-** KEYWORDS: sqlite3_module {virtual table module}
-** EXPERIMENTAL
-**
-** This structure, sometimes called a a "virtual table module",
-** defines the implementation of a [virtual tables].
-** This structure consists mostly of methods for the module.
-**
-** A virtual table module is created by filling in a persistent
-** instance of this structure and passing a pointer to that instance
-** to [sqlite3_create_module()] or [sqlite3_create_module_v2()].
-** The registration remains valid until it is replaced by a different
-** module or until the [database connection] closes. The content
-** of this structure must not change while it is registered with
-** any database connection.
-*/
-struct sqlite3_module {
- int iVersion;
- int (*xCreate)(sqlite3*, void *pAux,
- int argc, const char *const*argv,
- sqlite3_vtab **ppVTab, char**);
- int (*xConnect)(sqlite3*, void *pAux,
- int argc, const char *const*argv,
- sqlite3_vtab **ppVTab, char**);
- int (*xBestIndex)(sqlite3_vtab *pVTab, sqlite3_index_info*);
- int (*xDisconnect)(sqlite3_vtab *pVTab);
- int (*xDestroy)(sqlite3_vtab *pVTab);
- int (*xOpen)(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCursor);
- int (*xClose)(sqlite3_vtab_cursor*);
- int (*xFilter)(sqlite3_vtab_cursor*, int idxNum, const char *idxStr,
- int argc, sqlite3_value **argv);
- int (*xNext)(sqlite3_vtab_cursor*);
- int (*xEof)(sqlite3_vtab_cursor*);
- int (*xColumn)(sqlite3_vtab_cursor*, sqlite3_context*, int);
- int (*xRowid)(sqlite3_vtab_cursor*, sqlite3_int64 *pRowid);
- int (*xUpdate)(sqlite3_vtab *, int, sqlite3_value **, sqlite3_int64 *);
- int (*xBegin)(sqlite3_vtab *pVTab);
- int (*xSync)(sqlite3_vtab *pVTab);
- int (*xCommit)(sqlite3_vtab *pVTab);
- int (*xRollback)(sqlite3_vtab *pVTab);
- int (*xFindFunction)(sqlite3_vtab *pVtab, int nArg, const char *zName,
- void (**pxFunc)(sqlite3_context*,int,sqlite3_value**),
- void **ppArg);
- int (*xRename)(sqlite3_vtab *pVtab, const char *zNew);
-};
-
-/*
-** CAPI3REF: Virtual Table Indexing Information {H18100} <S20400>
-** KEYWORDS: sqlite3_index_info
-** EXPERIMENTAL
-**
-** The sqlite3_index_info structure and its substructures is used to
-** pass information into and receive the reply from the [xBestIndex]
-** method of a [virtual table module]. The fields under **Inputs** are the
-** inputs to xBestIndex and are read-only. xBestIndex inserts its
-** results into the **Outputs** fields.
-**
-** The aConstraint[] array records WHERE clause constraints of the form:
-**
-** <pre>column OP expr</pre>
-**
-** where OP is =, &lt;, &lt;=, &gt;, or &gt;=. The particular operator is
-** stored in aConstraint[].op. The index of the column is stored in
-** aConstraint[].iColumn. aConstraint[].usable is TRUE if the
-** expr on the right-hand side can be evaluated (and thus the constraint
-** is usable) and false if it cannot.
-**
-** The optimizer automatically inverts terms of the form "expr OP column"
-** and makes other simplifications to the WHERE clause in an attempt to
-** get as many WHERE clause terms into the form shown above as possible.
-** The aConstraint[] array only reports WHERE clause terms in the correct
-** form that refer to the particular virtual table being queried.
-**
-** Information about the ORDER BY clause is stored in aOrderBy[].
-** Each term of aOrderBy records a column of the ORDER BY clause.
-**
-** The [xBestIndex] method must fill aConstraintUsage[] with information
-** about what parameters to pass to xFilter. If argvIndex>0 then
-** the right-hand side of the corresponding aConstraint[] is evaluated
-** and becomes the argvIndex-th entry in argv. If aConstraintUsage[].omit
-** is true, then the constraint is assumed to be fully handled by the
-** virtual table and is not checked again by SQLite.
-**
-** The idxNum and idxPtr values are recorded and passed into the
-** [xFilter] method.
-** [sqlite3_free()] is used to free idxPtr if and only iff
-** needToFreeIdxPtr is true.
-**
-** The orderByConsumed means that output from [xFilter]/[xNext] will occur in
-** the correct order to satisfy the ORDER BY clause so that no separate
-** sorting step is required.
-**
-** The estimatedCost value is an estimate of the cost of doing the
-** particular lookup. A full scan of a table with N entries should have
-** a cost of N. A binary search of a table of N entries should have a
-** cost of approximately log(N).
-*/
-struct sqlite3_index_info {
- /* Inputs */
- int nConstraint; /* Number of entries in aConstraint */
- struct sqlite3_index_constraint {
- int iColumn; /* Column on left-hand side of constraint */
- unsigned char op; /* Constraint operator */
- unsigned char usable; /* True if this constraint is usable */
- int iTermOffset; /* Used internally - xBestIndex should ignore */
- } *aConstraint; /* Table of WHERE clause constraints */
- int nOrderBy; /* Number of terms in the ORDER BY clause */
- struct sqlite3_index_orderby {
- int iColumn; /* Column number */
- unsigned char desc; /* True for DESC. False for ASC. */
- } *aOrderBy; /* The ORDER BY clause */
- /* Outputs */
- struct sqlite3_index_constraint_usage {
- int argvIndex; /* if >0, constraint is part of argv to xFilter */
- unsigned char omit; /* Do not code a test for this constraint */
- } *aConstraintUsage;
- int idxNum; /* Number used to identify the index */
- char *idxStr; /* String, possibly obtained from sqlite3_malloc */
- int needToFreeIdxStr; /* Free idxStr using sqlite3_free() if true */
- int orderByConsumed; /* True if output is already ordered */
- double estimatedCost; /* Estimated cost of using this index */
-};
-#define SQLITE_INDEX_CONSTRAINT_EQ 2
-#define SQLITE_INDEX_CONSTRAINT_GT 4
-#define SQLITE_INDEX_CONSTRAINT_LE 8
-#define SQLITE_INDEX_CONSTRAINT_LT 16
-#define SQLITE_INDEX_CONSTRAINT_GE 32
-#define SQLITE_INDEX_CONSTRAINT_MATCH 64
-
-/*
-** CAPI3REF: Register A Virtual Table Implementation {H18200} <S20400>
-** EXPERIMENTAL
-**
-** This routine is used to register a new [virtual table module] name.
-** Module names must be registered before
-** creating a new [virtual table] using the module, or before using a
-** preexisting [virtual table] for the module.
-**
-** The module name is registered on the [database connection] specified
-** by the first parameter. The name of the module is given by the
-** second parameter. The third parameter is a pointer to
-** the implementation of the [virtual table module]. The fourth
-** parameter is an arbitrary client data pointer that is passed through
-** into the [xCreate] and [xConnect] methods of the virtual table module
-** when a new virtual table is be being created or reinitialized.
-**
-** This interface has exactly the same effect as calling
-** [sqlite3_create_module_v2()] with a NULL client data destructor.
-*/
-SQLITE_EXPERIMENTAL int sqlite3_create_module(
- sqlite3 *db, /* SQLite connection to register module with */
- const char *zName, /* Name of the module */
- const sqlite3_module *p, /* Methods for the module */
- void *pClientData /* Client data for xCreate/xConnect */
-);
-
-/*
-** CAPI3REF: Register A Virtual Table Implementation {H18210} <S20400>
-** EXPERIMENTAL
-**
-** This routine is identical to the [sqlite3_create_module()] method,
-** except that it has an extra parameter to specify
-** a destructor function for the client data pointer. SQLite will
-** invoke the destructor function (if it is not NULL) when SQLite
-** no longer needs the pClientData pointer.
-*/
-SQLITE_EXPERIMENTAL int sqlite3_create_module_v2(
- sqlite3 *db, /* SQLite connection to register module with */
- const char *zName, /* Name of the module */
- const sqlite3_module *p, /* Methods for the module */
- void *pClientData, /* Client data for xCreate/xConnect */
- void(*xDestroy)(void*) /* Module destructor function */
-);
-
-/*
-** CAPI3REF: Virtual Table Instance Object {H18010} <S20400>
-** KEYWORDS: sqlite3_vtab
-** EXPERIMENTAL
-**
-** Every [virtual table module] implementation uses a subclass
-** of the following structure to describe a particular instance
-** of the [virtual table]. Each subclass will
-** be tailored to the specific needs of the module implementation.
-** The purpose of this superclass is to define certain fields that are
-** common to all module implementations.
-**
-** Virtual tables methods can set an error message by assigning a
-** string obtained from [sqlite3_mprintf()] to zErrMsg. The method should
-** take care that any prior string is freed by a call to [sqlite3_free()]
-** prior to assigning a new string to zErrMsg. After the error message
-** is delivered up to the client application, the string will be automatically
-** freed by sqlite3_free() and the zErrMsg field will be zeroed.
-*/
-struct sqlite3_vtab {
- const sqlite3_module *pModule; /* The module for this virtual table */
- int nRef; /* Used internally */
- char *zErrMsg; /* Error message from sqlite3_mprintf() */
- /* Virtual table implementations will typically add additional fields */
-};
-
-/*
-** CAPI3REF: Virtual Table Cursor Object {H18020} <S20400>
-** KEYWORDS: sqlite3_vtab_cursor {virtual table cursor}
-** EXPERIMENTAL
-**
-** Every [virtual table module] implementation uses a subclass of the
-** following structure to describe cursors that point into the
-** [virtual table] and are used
-** to loop through the virtual table. Cursors are created using the
-** [sqlite3_module.xOpen | xOpen] method of the module and are destroyed
-** by the [sqlite3_module.xClose | xClose] method. Cussors are used
-** by the [xFilter], [xNext], [xEof], [xColumn], and [xRowid] methods
-** of the module. Each module implementation will define
-** the content of a cursor structure to suit its own needs.
-**
-** This superclass exists in order to define fields of the cursor that
-** are common to all implementations.
-*/
-struct sqlite3_vtab_cursor {
- sqlite3_vtab *pVtab; /* Virtual table of this cursor */
- /* Virtual table implementations will typically add additional fields */
-};
-
-/*
-** CAPI3REF: Declare The Schema Of A Virtual Table {H18280} <S20400>
-** EXPERIMENTAL
-**
-** The [xCreate] and [xConnect] methods of a
-** [virtual table module] call this interface
-** to declare the format (the names and datatypes of the columns) of
-** the virtual tables they implement.
-*/
-SQLITE_EXPERIMENTAL int sqlite3_declare_vtab(sqlite3*, const char *zSQL);
-
-/*
-** CAPI3REF: Overload A Function For A Virtual Table {H18300} <S20400>
-** EXPERIMENTAL
-**
-** Virtual tables can provide alternative implementations of functions
-** using the [xFindFunction] method of the [virtual table module].
-** But global versions of those functions
-** must exist in order to be overloaded.
-**
-** This API makes sure a global version of a function with a particular
-** name and number of parameters exists. If no such function exists
-** before this API is called, a new function is created. The implementation
-** of the new function always causes an exception to be thrown. So
-** the new function is not good for anything by itself. Its only
-** purpose is to be a placeholder function that can be overloaded
-** by a [virtual table].
-*/
-SQLITE_EXPERIMENTAL int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
-
-/*
-** The interface to the virtual-table mechanism defined above (back up
-** to a comment remarkably similar to this one) is currently considered
-** to be experimental. The interface might change in incompatible ways.
-** If this is a problem for you, do not use the interface at this time.
-**
-** When the virtual-table mechanism stabilizes, we will declare the
-** interface fixed, support it indefinitely, and remove this comment.
-**
-****** EXPERIMENTAL - subject to change without notice **************
-*/
-
-/*
-** CAPI3REF: A Handle To An Open BLOB {H17800} <S30230>
-** KEYWORDS: {BLOB handle} {BLOB handles}
-**
-** An instance of this object represents an open BLOB on which
-** [sqlite3_blob_open | incremental BLOB I/O] can be performed.
-** Objects of this type are created by [sqlite3_blob_open()]
-** and destroyed by [sqlite3_blob_close()].
-** The [sqlite3_blob_read()] and [sqlite3_blob_write()] interfaces
-** can be used to read or write small subsections of the BLOB.
-** The [sqlite3_blob_bytes()] interface returns the size of the BLOB in bytes.
-*/
-typedef struct sqlite3_blob sqlite3_blob;
-
-/*
-** CAPI3REF: Open A BLOB For Incremental I/O {H17810} <S30230>
-**
-** This interfaces opens a [BLOB handle | handle] to the BLOB located
-** in row iRow, column zColumn, table zTable in database zDb;
-** in other words, the same BLOB that would be selected by:
-**
-** <pre>
-** SELECT zColumn FROM zDb.zTable WHERE [rowid] = iRow;
-** </pre> {END}
-**
-** If the flags parameter is non-zero, the the BLOB is opened for read
-** and write access. If it is zero, the BLOB is opened for read access.
-**
-** Note that the database name is not the filename that contains
-** the database but rather the symbolic name of the database that
-** is assigned when the database is connected using [ATTACH].
-** For the main database file, the database name is "main".
-** For TEMP tables, the database name is "temp".
-**
-** On success, [SQLITE_OK] is returned and the new [BLOB handle] is written
-** to *ppBlob. Otherwise an [error code] is returned and any value written
-** to *ppBlob should not be used by the caller.
-** This function sets the [database connection] error code and message
-** accessible via [sqlite3_errcode()] and [sqlite3_errmsg()].
-**
-** If the row that a BLOB handle points to is modified by an
-** [UPDATE], [DELETE], or by [ON CONFLICT] side-effects
-** then the BLOB handle is marked as "expired".
-** This is true if any column of the row is changed, even a column
-** other than the one the BLOB handle is open on.
-** Calls to [sqlite3_blob_read()] and [sqlite3_blob_write()] for
-** a expired BLOB handle fail with an return code of [SQLITE_ABORT].
-** Changes written into a BLOB prior to the BLOB expiring are not
-** rollback by the expiration of the BLOB. Such changes will eventually
-** commit if the transaction continues to completion.
-**
-** Requirements:
-** [H17813] [H17814] [H17816] [H17819] [H17821] [H17824]
-*/
-int sqlite3_blob_open(
- sqlite3*,
- const char *zDb,
- const char *zTable,
- const char *zColumn,
- sqlite3_int64 iRow,
- int flags,
- sqlite3_blob **ppBlob
-);
-
-/*
-** CAPI3REF: Close A BLOB Handle {H17830} <S30230>
-**
-** Closes an open [BLOB handle].
-**
-** Closing a BLOB shall cause the current transaction to commit
-** if there are no other BLOBs, no pending prepared statements, and the
-** database connection is in [autocommit mode].
-** If any writes were made to the BLOB, they might be held in cache
-** until the close operation if they will fit. {END}
-**
-** Closing the BLOB often forces the changes
-** out to disk and so if any I/O errors occur, they will likely occur
-** at the time when the BLOB is closed. {H17833} Any errors that occur during
-** closing are reported as a non-zero return value.
-**
-** The BLOB is closed unconditionally. Even if this routine returns
-** an error code, the BLOB is still closed.
-**
-** Requirements:
-** [H17833] [H17836] [H17839]
-*/
-int sqlite3_blob_close(sqlite3_blob *);
-
-/*
-** CAPI3REF: Return The Size Of An Open BLOB {H17840} <S30230>
-**
-** Returns the size in bytes of the BLOB accessible via the open
-** []BLOB handle] in its only argument.
-**
-** Requirements:
-** [H17843]
-*/
-int sqlite3_blob_bytes(sqlite3_blob *);
-
-/*
-** CAPI3REF: Read Data From A BLOB Incrementally {H17850} <S30230>
-**
-** This function is used to read data from an open [BLOB handle] into a
-** caller-supplied buffer. N bytes of data are copied into buffer Z
-** from the open BLOB, starting at offset iOffset.
-**
-** If offset iOffset is less than N bytes from the end of the BLOB,
-** [SQLITE_ERROR] is returned and no data is read. If N or iOffset is
-** less than zero, [SQLITE_ERROR] is returned and no data is read.
-**
-** An attempt to read from an expired [BLOB handle] fails with an
-** error code of [SQLITE_ABORT].
-**
-** On success, SQLITE_OK is returned.
-** Otherwise, an [error code] or an [extended error code] is returned.
-**
-** Requirements:
-** [H17853] [H17856] [H17859] [H17862] [H17863] [H17865] [H17868]
-*/
-int sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
-
-/*
-** CAPI3REF: Write Data Into A BLOB Incrementally {H17870} <S30230>
-**
-** This function is used to write data into an open [BLOB handle] from a
-** caller-supplied buffer. N bytes of data are copied from the buffer Z
-** into the open BLOB, starting at offset iOffset.
-**
-** If the [BLOB handle] passed as the first argument was not opened for
-** writing (the flags parameter to [sqlite3_blob_open()] was zero),
-** this function returns [SQLITE_READONLY].
-**
-** This function may only modify the contents of the BLOB; it is
-** not possible to increase the size of a BLOB using this API.
-** If offset iOffset is less than N bytes from the end of the BLOB,
-** [SQLITE_ERROR] is returned and no data is written. If N is
-** less than zero [SQLITE_ERROR] is returned and no data is written.
-**
-** An attempt to write to an expired [BLOB handle] fails with an
-** error code of [SQLITE_ABORT]. Writes to the BLOB that occurred
-** before the [BLOB handle] expired are not rolled back by the
-** expiration of the handle, though of course those changes might
-** have been overwritten by the statement that expired the BLOB handle
-** or by other independent statements.
-**
-** On success, SQLITE_OK is returned.
-** Otherwise, an [error code] or an [extended error code] is returned.
-**
-** Requirements:
-** [H17873] [H17874] [H17875] [H17876] [H17877] [H17879] [H17882] [H17885]
-** [H17888]
-*/
-int sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
-
-/*
-** CAPI3REF: Virtual File System Objects {H11200} <S20100>
-**
-** A virtual filesystem (VFS) is an [sqlite3_vfs] object
-** that SQLite uses to interact
-** with the underlying operating system. Most SQLite builds come with a
-** single default VFS that is appropriate for the host computer.
-** New VFSes can be registered and existing VFSes can be unregistered.
-** The following interfaces are provided.
-**
-** The sqlite3_vfs_find() interface returns a pointer to a VFS given its name.
-** Names are case sensitive.
-** Names are zero-terminated UTF-8 strings.
-** If there is no match, a NULL pointer is returned.
-** If zVfsName is NULL then the default VFS is returned.
-**
-** New VFSes are registered with sqlite3_vfs_register().
-** Each new VFS becomes the default VFS if the makeDflt flag is set.
-** The same VFS can be registered multiple times without injury.
-** To make an existing VFS into the default VFS, register it again
-** with the makeDflt flag set. If two different VFSes with the
-** same name are registered, the behavior is undefined. If a
-** VFS is registered with a name that is NULL or an empty string,
-** then the behavior is undefined.
-**
-** Unregister a VFS with the sqlite3_vfs_unregister() interface.
-** If the default VFS is unregistered, another VFS is chosen as
-** the default. The choice for the new VFS is arbitrary.
-**
-** Requirements:
-** [H11203] [H11206] [H11209] [H11212] [H11215] [H11218]
-*/
-sqlite3_vfs *sqlite3_vfs_find(const char *zVfsName);
-int sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
-int sqlite3_vfs_unregister(sqlite3_vfs*);
-
-/*
-** CAPI3REF: Mutexes {H17000} <S20000>
-**
-** The SQLite core uses these routines for thread
-** synchronization. Though they are intended for internal
-** use by SQLite, code that links against SQLite is
-** permitted to use any of these routines.
-**
-** The SQLite source code contains multiple implementations
-** of these mutex routines. An appropriate implementation
-** is selected automatically at compile-time. The following
-** implementations are available in the SQLite core:
-**
-** <ul>
-** <li> SQLITE_MUTEX_OS2
-** <li> SQLITE_MUTEX_PTHREAD
-** <li> SQLITE_MUTEX_W32
-** <li> SQLITE_MUTEX_NOOP
-** </ul>
-**
-** The SQLITE_MUTEX_NOOP implementation is a set of routines
-** that does no real locking and is appropriate for use in
-** a single-threaded application. The SQLITE_MUTEX_OS2,
-** SQLITE_MUTEX_PTHREAD, and SQLITE_MUTEX_W32 implementations
-** are appropriate for use on OS/2, Unix, and Windows.
-**
-** If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor
-** macro defined (with "-DSQLITE_MUTEX_APPDEF=1"), then no mutex
-** implementation is included with the library. In this case the
-** application must supply a custom mutex implementation using the
-** [SQLITE_CONFIG_MUTEX] option of the sqlite3_config() function
-** before calling sqlite3_initialize() or any other public sqlite3_
-** function that calls sqlite3_initialize().
-**
-** {H17011} The sqlite3_mutex_alloc() routine allocates a new
-** mutex and returns a pointer to it. {H17012} If it returns NULL
-** that means that a mutex could not be allocated. {H17013} SQLite
-** will unwind its stack and return an error. {H17014} The argument
-** to sqlite3_mutex_alloc() is one of these integer constants:
-**
-** <ul>
-** <li> SQLITE_MUTEX_FAST
-** <li> SQLITE_MUTEX_RECURSIVE
-** <li> SQLITE_MUTEX_STATIC_MASTER
-** <li> SQLITE_MUTEX_STATIC_MEM
-** <li> SQLITE_MUTEX_STATIC_MEM2
-** <li> SQLITE_MUTEX_STATIC_PRNG
-** <li> SQLITE_MUTEX_STATIC_LRU
-** <li> SQLITE_MUTEX_STATIC_LRU2
-** </ul>
-**
-** {H17015} The first two constants cause sqlite3_mutex_alloc() to create
-** a new mutex. The new mutex is recursive when SQLITE_MUTEX_RECURSIVE
-** is used but not necessarily so when SQLITE_MUTEX_FAST is used. {END}
-** The mutex implementation does not need to make a distinction
-** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does
-** not want to. {H17016} But SQLite will only request a recursive mutex in
-** cases where it really needs one. {END} If a faster non-recursive mutex
-** implementation is available on the host platform, the mutex subsystem
-** might return such a mutex in response to SQLITE_MUTEX_FAST.
-**
-** {H17017} The other allowed parameters to sqlite3_mutex_alloc() each return
-** a pointer to a static preexisting mutex. {END} Four static mutexes are
-** used by the current version of SQLite. Future versions of SQLite
-** may add additional static mutexes. Static mutexes are for internal
-** use by SQLite only. Applications that use SQLite mutexes should
-** use only the dynamic mutexes returned by SQLITE_MUTEX_FAST or
-** SQLITE_MUTEX_RECURSIVE.
-**
-** {H17018} Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST
-** or SQLITE_MUTEX_RECURSIVE) is used then sqlite3_mutex_alloc()
-** returns a different mutex on every call. {H17034} But for the static
-** mutex types, the same mutex is returned on every call that has
-** the same type number.
-**
-** {H17019} The sqlite3_mutex_free() routine deallocates a previously
-** allocated dynamic mutex. {H17020} SQLite is careful to deallocate every
-** dynamic mutex that it allocates. {A17021} The dynamic mutexes must not be in
-** use when they are deallocated. {A17022} Attempting to deallocate a static
-** mutex results in undefined behavior. {H17023} SQLite never deallocates
-** a static mutex. {END}
-**
-** The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt
-** to enter a mutex. {H17024} If another thread is already within the mutex,
-** sqlite3_mutex_enter() will block and sqlite3_mutex_try() will return
-** SQLITE_BUSY. {H17025} The sqlite3_mutex_try() interface returns [SQLITE_OK]
-** upon successful entry. {H17026} Mutexes created using
-** SQLITE_MUTEX_RECURSIVE can be entered multiple times by the same thread.
-** {H17027} In such cases the,
-** mutex must be exited an equal number of times before another thread
-** can enter. {A17028} If the same thread tries to enter any other
-** kind of mutex more than once, the behavior is undefined.
-** {H17029} SQLite will never exhibit
-** such behavior in its own use of mutexes.
-**
-** Some systems (for example, Windows 95) do not support the operation
-** implemented by sqlite3_mutex_try(). On those systems, sqlite3_mutex_try()
-** will always return SQLITE_BUSY. {H17030} The SQLite core only ever uses
-** sqlite3_mutex_try() as an optimization so this is acceptable behavior.
-**
-** {H17031} The sqlite3_mutex_leave() routine exits a mutex that was
-** previously entered by the same thread. {A17032} The behavior
-** is undefined if the mutex is not currently entered by the
-** calling thread or is not currently allocated. {H17033} SQLite will
-** never do either. {END}
-**
-** If the argument to sqlite3_mutex_enter(), sqlite3_mutex_try(), or
-** sqlite3_mutex_leave() is a NULL pointer, then all three routines
-** behave as no-ops.
-**
-** See also: [sqlite3_mutex_held()] and [sqlite3_mutex_notheld()].
-*/
-sqlite3_mutex *sqlite3_mutex_alloc(int);
-void sqlite3_mutex_free(sqlite3_mutex*);
-void sqlite3_mutex_enter(sqlite3_mutex*);
-int sqlite3_mutex_try(sqlite3_mutex*);
-void sqlite3_mutex_leave(sqlite3_mutex*);
-
-/*
-** CAPI3REF: Mutex Methods Object {H17120} <S20130>
-** EXPERIMENTAL
-**
-** An instance of this structure defines the low-level routines
-** used to allocate and use mutexes.
-**
-** Usually, the default mutex implementations provided by SQLite are
-** sufficient, however the user has the option of substituting a custom
-** implementation for specialized deployments or systems for which SQLite
-** does not provide a suitable implementation. In this case, the user
-** creates and populates an instance of this structure to pass
-** to sqlite3_config() along with the [SQLITE_CONFIG_MUTEX] option.
-** Additionally, an instance of this structure can be used as an
-** output variable when querying the system for the current mutex
-** implementation, using the [SQLITE_CONFIG_GETMUTEX] option.
-**
-** The xMutexInit method defined by this structure is invoked as
-** part of system initialization by the sqlite3_initialize() function.
-** {H17001} The xMutexInit routine shall be called by SQLite once for each
-** effective call to [sqlite3_initialize()].
-**
-** The xMutexEnd method defined by this structure is invoked as
-** part of system shutdown by the sqlite3_shutdown() function. The
-** implementation of this method is expected to release all outstanding
-** resources obtained by the mutex methods implementation, especially
-** those obtained by the xMutexInit method. {H17003} The xMutexEnd()
-** interface shall be invoked once for each call to [sqlite3_shutdown()].
-**
-** The remaining seven methods defined by this structure (xMutexAlloc,
-** xMutexFree, xMutexEnter, xMutexTry, xMutexLeave, xMutexHeld and
-** xMutexNotheld) implement the following interfaces (respectively):
-**
-** <ul>
-** <li> [sqlite3_mutex_alloc()] </li>
-** <li> [sqlite3_mutex_free()] </li>
-** <li> [sqlite3_mutex_enter()] </li>
-** <li> [sqlite3_mutex_try()] </li>
-** <li> [sqlite3_mutex_leave()] </li>
-** <li> [sqlite3_mutex_held()] </li>
-** <li> [sqlite3_mutex_notheld()] </li>
-** </ul>
-**
-** The only difference is that the public sqlite3_XXX functions enumerated
-** above silently ignore any invocations that pass a NULL pointer instead
-** of a valid mutex handle. The implementations of the methods defined
-** by this structure are not required to handle this case, the results
-** of passing a NULL pointer instead of a valid mutex handle are undefined
-** (i.e. it is acceptable to provide an implementation that segfaults if
-** it is passed a NULL pointer).
-*/
-typedef struct sqlite3_mutex_methods sqlite3_mutex_methods;
-struct sqlite3_mutex_methods {
- int (*xMutexInit)(void);
- int (*xMutexEnd)(void);
- sqlite3_mutex *(*xMutexAlloc)(int);
- void (*xMutexFree)(sqlite3_mutex *);
- void (*xMutexEnter)(sqlite3_mutex *);
- int (*xMutexTry)(sqlite3_mutex *);
- void (*xMutexLeave)(sqlite3_mutex *);
- int (*xMutexHeld)(sqlite3_mutex *);
- int (*xMutexNotheld)(sqlite3_mutex *);
-};
-
-/*
-** CAPI3REF: Mutex Verification Routines {H17080} <S20130> <S30800>
-**
-** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routines
-** are intended for use inside assert() statements. {H17081} The SQLite core
-** never uses these routines except inside an assert() and applications
-** are advised to follow the lead of the core. {H17082} The core only
-** provides implementations for these routines when it is compiled
-** with the SQLITE_DEBUG flag. {A17087} External mutex implementations
-** are only required to provide these routines if SQLITE_DEBUG is
-** defined and if NDEBUG is not defined.
-**
-** {H17083} These routines should return true if the mutex in their argument
-** is held or not held, respectively, by the calling thread.
-**
-** {X17084} The implementation is not required to provided versions of these
-** routines that actually work. If the implementation does not provide working
-** versions of these routines, it should at least provide stubs that always
-** return true so that one does not get spurious assertion failures.
-**
-** {H17085} If the argument to sqlite3_mutex_held() is a NULL pointer then
-** the routine should return 1. {END} This seems counter-intuitive since
-** clearly the mutex cannot be held if it does not exist. But the
-** the reason the mutex does not exist is because the build is not
-** using mutexes. And we do not want the assert() containing the
-** call to sqlite3_mutex_held() to fail, so a non-zero return is
-** the appropriate thing to do. {H17086} The sqlite3_mutex_notheld()
-** interface should also return 1 when given a NULL pointer.
-*/
-int sqlite3_mutex_held(sqlite3_mutex*);
-int sqlite3_mutex_notheld(sqlite3_mutex*);
-
-/*
-** CAPI3REF: Mutex Types {H17001} <H17000>
-**
-** The [sqlite3_mutex_alloc()] interface takes a single argument
-** which is one of these integer constants.
-**
-** The set of static mutexes may change from one SQLite release to the
-** next. Applications that override the built-in mutex logic must be
-** prepared to accommodate additional static mutexes.
-*/
-#define SQLITE_MUTEX_FAST 0
-#define SQLITE_MUTEX_RECURSIVE 1
-#define SQLITE_MUTEX_STATIC_MASTER 2
-#define SQLITE_MUTEX_STATIC_MEM 3 /* sqlite3_malloc() */
-#define SQLITE_MUTEX_STATIC_MEM2 4 /* NOT USED */
-#define SQLITE_MUTEX_STATIC_OPEN 4 /* sqlite3BtreeOpen() */
-#define SQLITE_MUTEX_STATIC_PRNG 5 /* sqlite3_random() */
-#define SQLITE_MUTEX_STATIC_LRU 6 /* lru page list */
-#define SQLITE_MUTEX_STATIC_LRU2 7 /* lru page list */
-
-/*
-** CAPI3REF: Retrieve the mutex for a database connection {H17002} <H17000>
-**
-** This interface returns a pointer the [sqlite3_mutex] object that
-** serializes access to the [database connection] given in the argument
-** when the [threading mode] is Serialized.
-** If the [threading mode] is Single-thread or Multi-thread then this
-** routine returns a NULL pointer.
-*/
-sqlite3_mutex *sqlite3_db_mutex(sqlite3*);
-
-/*
-** CAPI3REF: Low-Level Control Of Database Files {H11300} <S30800>
-**
-** {H11301} The [sqlite3_file_control()] interface makes a direct call to the
-** xFileControl method for the [sqlite3_io_methods] object associated
-** with a particular database identified by the second argument. {H11302} The
-** name of the database is the name assigned to the database by the
-** <a href="lang_attach.html">ATTACH</a> SQL command that opened the
-** database. {H11303} To control the main database file, use the name "main"
-** or a NULL pointer. {H11304} The third and fourth parameters to this routine
-** are passed directly through to the second and third parameters of
-** the xFileControl method. {H11305} The return value of the xFileControl
-** method becomes the return value of this routine.
-**
-** {H11306} If the second parameter (zDbName) does not match the name of any
-** open database file, then SQLITE_ERROR is returned. {H11307} This error
-** code is not remembered and will not be recalled by [sqlite3_errcode()]
-** or [sqlite3_errmsg()]. {A11308} The underlying xFileControl method might
-** also return SQLITE_ERROR. {A11309} There is no way to distinguish between
-** an incorrect zDbName and an SQLITE_ERROR return from the underlying
-** xFileControl method. {END}
-**
-** See also: [SQLITE_FCNTL_LOCKSTATE]
-*/
-int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
-
-/*
-** CAPI3REF: Testing Interface {H11400} <S30800>
-**
-** The sqlite3_test_control() interface is used to read out internal
-** state of SQLite and to inject faults into SQLite for testing
-** purposes. The first parameter is an operation code that determines
-** the number, meaning, and operation of all subsequent parameters.
-**
-** This interface is not for use by applications. It exists solely
-** for verifying the correct operation of the SQLite library. Depending
-** on how the SQLite library is compiled, this interface might not exist.
-**
-** The details of the operation codes, their meanings, the parameters
-** they take, and what they do are all subject to change without notice.
-** Unlike most of the SQLite API, this function is not guaranteed to
-** operate consistently from one release to the next.
-*/
-int sqlite3_test_control(int op, ...);
-
-/*
-** CAPI3REF: Testing Interface Operation Codes {H11410} <H11400>
-**
-** These constants are the valid operation code parameters used
-** as the first argument to [sqlite3_test_control()].
-**
-** These parameters and their meanings are subject to change
-** without notice. These values are for testing purposes only.
-** Applications should not use any of these parameters or the
-** [sqlite3_test_control()] interface.
-*/
-#define SQLITE_TESTCTRL_PRNG_SAVE 5
-#define SQLITE_TESTCTRL_PRNG_RESTORE 6
-#define SQLITE_TESTCTRL_PRNG_RESET 7
-#define SQLITE_TESTCTRL_BITVEC_TEST 8
-#define SQLITE_TESTCTRL_FAULT_INSTALL 9
-#define SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS 10
-#define SQLITE_TESTCTRL_PENDING_BYTE 11
-
-/*
-** CAPI3REF: SQLite Runtime Status {H17200} <S60200>
-** EXPERIMENTAL
-**
-** This interface is used to retrieve runtime status information
-** about the preformance of SQLite, and optionally to reset various
-** highwater marks. The first argument is an integer code for
-** the specific parameter to measure. Recognized integer codes
-** are of the form [SQLITE_STATUS_MEMORY_USED | SQLITE_STATUS_...].
-** The current value of the parameter is returned into *pCurrent.
-** The highest recorded value is returned in *pHighwater. If the
-** resetFlag is true, then the highest record value is reset after
-** *pHighwater is written. Some parameters do not record the highest
-** value. For those parameters
-** nothing is written into *pHighwater and the resetFlag is ignored.
-** Other parameters record only the highwater mark and not the current
-** value. For these latter parameters nothing is written into *pCurrent.
-**
-** This routine returns SQLITE_OK on success and a non-zero
-** [error code] on failure.
-**
-** This routine is threadsafe but is not atomic. This routine can
-** called while other threads are running the same or different SQLite
-** interfaces. However the values returned in *pCurrent and
-** *pHighwater reflect the status of SQLite at different points in time
-** and it is possible that another thread might change the parameter
-** in between the times when *pCurrent and *pHighwater are written.
-**
-** See also: [sqlite3_db_status()]
-*/
-SQLITE_EXPERIMENTAL int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
-
-
-/*
-** CAPI3REF: Status Parameters {H17250} <H17200>
-** EXPERIMENTAL
-**
-** These integer constants designate various run-time status parameters
-** that can be returned by [sqlite3_status()].
-**
-** <dl>
-** <dt>SQLITE_STATUS_MEMORY_USED</dt>
-** <dd>This parameter is the current amount of memory checked out
-** using [sqlite3_malloc()], either directly or indirectly. The
-** figure includes calls made to [sqlite3_malloc()] by the application
-** and internal memory usage by the SQLite library. Scratch memory
-** controlled by [SQLITE_CONFIG_SCRATCH] and auxiliary page-cache
-** memory controlled by [SQLITE_CONFIG_PAGECACHE] is not included in
-** this parameter. The amount returned is the sum of the allocation
-** sizes as reported by the xSize method in [sqlite3_mem_methods].</dd>
-**
-** <dt>SQLITE_STATUS_MALLOC_SIZE</dt>
-** <dd>This parameter records the largest memory allocation request
-** handed to [sqlite3_malloc()] or [sqlite3_realloc()] (or their
-** internal equivalents). Only the value returned in the
-** *pHighwater parameter to [sqlite3_status()] is of interest.
-** The value written into the *pCurrent parameter is undefined.</dd>
-**
-** <dt>SQLITE_STATUS_PAGECACHE_USED</dt>
-** <dd>This parameter returns the number of pages used out of the
-** [pagecache memory allocator] that was configured using
-** [SQLITE_CONFIG_PAGECACHE]. The
-** value returned is in pages, not in bytes.</dd>
-**
-** <dt>SQLITE_STATUS_PAGECACHE_OVERFLOW</dt>
-** <dd>This parameter returns the number of bytes of page cache
-** allocation which could not be statisfied by the [SQLITE_CONFIG_PAGECACHE]
-** buffer and where forced to overflow to [sqlite3_malloc()]. The
-** returned value includes allocations that overflowed because they
-** where too large (they were larger than the "sz" parameter to
-** [SQLITE_CONFIG_PAGECACHE]) and allocations that overflowed because
-** no space was left in the page cache.</dd>
-**
-** <dt>SQLITE_STATUS_PAGECACHE_SIZE</dt>
-** <dd>This parameter records the largest memory allocation request
-** handed to [pagecache memory allocator]. Only the value returned in the
-** *pHighwater parameter to [sqlite3_status()] is of interest.
-** The value written into the *pCurrent parameter is undefined.</dd>
-**
-** <dt>SQLITE_STATUS_SCRATCH_USED</dt>
-** <dd>This parameter returns the number of allocations used out of the
-** [scratch memory allocator] configured using
-** [SQLITE_CONFIG_SCRATCH]. The value returned is in allocations, not
-** in bytes. Since a single thread may only have one scratch allocation
-** outstanding at time, this parameter also reports the number of threads
-** using scratch memory at the same time.</dd>
-**
-** <dt>SQLITE_STATUS_SCRATCH_OVERFLOW</dt>
-** <dd>This parameter returns the number of bytes of scratch memory
-** allocation which could not be statisfied by the [SQLITE_CONFIG_SCRATCH]
-** buffer and where forced to overflow to [sqlite3_malloc()]. The values
-** returned include overflows because the requested allocation was too
-** larger (that is, because the requested allocation was larger than the
-** "sz" parameter to [SQLITE_CONFIG_SCRATCH]) and because no scratch buffer
-** slots were available.
-** </dd>
-**
-** <dt>SQLITE_STATUS_SCRATCH_SIZE</dt>
-** <dd>This parameter records the largest memory allocation request
-** handed to [scratch memory allocator]. Only the value returned in the
-** *pHighwater parameter to [sqlite3_status()] is of interest.
-** The value written into the *pCurrent parameter is undefined.</dd>
-**
-** <dt>SQLITE_STATUS_PARSER_STACK</dt>
-** <dd>This parameter records the deepest parser stack. It is only
-** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].</dd>
-** </dl>
-**
-** New status parameters may be added from time to time.
-*/
-#define SQLITE_STATUS_MEMORY_USED 0
-#define SQLITE_STATUS_PAGECACHE_USED 1
-#define SQLITE_STATUS_PAGECACHE_OVERFLOW 2
-#define SQLITE_STATUS_SCRATCH_USED 3
-#define SQLITE_STATUS_SCRATCH_OVERFLOW 4
-#define SQLITE_STATUS_MALLOC_SIZE 5
-#define SQLITE_STATUS_PARSER_STACK 6
-#define SQLITE_STATUS_PAGECACHE_SIZE 7
-#define SQLITE_STATUS_SCRATCH_SIZE 8
-
-/*
-** CAPI3REF: Database Connection Status {H17500} <S60200>
-** EXPERIMENTAL
-**
-** This interface is used to retrieve runtime status information
-** about a single [database connection]. The first argument is the
-** database connection object to be interrogated. The second argument
-** is the parameter to interrogate. Currently, the only allowed value
-** for the second parameter is [SQLITE_DBSTATUS_LOOKASIDE_USED].
-** Additional options will likely appear in future releases of SQLite.
-**
-** The current value of the requested parameter is written into *pCur
-** and the highest instantaneous value is written into *pHiwtr. If
-** the resetFlg is true, then the highest instantaneous value is
-** reset back down to the current value.
-**
-** See also: [sqlite3_status()] and [sqlite3_stmt_status()].
-*/
-SQLITE_EXPERIMENTAL int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
-
-/*
-** CAPI3REF: Status Parameters for database connections {H17520} <H17500>
-** EXPERIMENTAL
-**
-** Status verbs for [sqlite3_db_status()].
-**
-** <dl>
-** <dt>SQLITE_DBSTATUS_LOOKASIDE_USED</dt>
-** <dd>This parameter returns the number of lookaside memory slots currently
-** checked out.</dd>
-** </dl>
-*/
-#define SQLITE_DBSTATUS_LOOKASIDE_USED 0
-
-
-/*
-** CAPI3REF: Prepared Statement Status {H17550} <S60200>
-** EXPERIMENTAL
-**
-** Each prepared statement maintains various
-** [SQLITE_STMTSTATUS_SORT | counters] that measure the number
-** of times it has performed specific operations. These counters can
-** be used to monitor the performance characteristics of the prepared
-** statements. For example, if the number of table steps greatly exceeds
-** the number of table searches or result rows, that would tend to indicate
-** that the prepared statement is using a full table scan rather than
-** an index.
-**
-** This interface is used to retrieve and reset counter values from
-** a [prepared statement]. The first argument is the prepared statement
-** object to be interrogated. The second argument
-** is an integer code for a specific [SQLITE_STMTSTATUS_SORT | counter]
-** to be interrogated.
-** The current value of the requested counter is returned.
-** If the resetFlg is true, then the counter is reset to zero after this
-** interface call returns.
-**
-** See also: [sqlite3_status()] and [sqlite3_db_status()].
-*/
-SQLITE_EXPERIMENTAL int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
-
-/*
-** CAPI3REF: Status Parameters for prepared statements {H17570} <H17550>
-** EXPERIMENTAL
-**
-** These preprocessor macros define integer codes that name counter
-** values associated with the [sqlite3_stmt_status()] interface.
-** The meanings of the various counters are as follows:
-**
-** <dl>
-** <dt>SQLITE_STMTSTATUS_FULLSCAN_STEP</dt>
-** <dd>This is the number of times that SQLite has stepped forward in
-** a table as part of a full table scan. Large numbers for this counter
-** may indicate opportunities for performance improvement through
-** careful use of indices.</dd>
-**
-** <dt>SQLITE_STMTSTATUS_SORT</dt>
-** <dd>This is the number of sort operations that have occurred.
-** A non-zero value in this counter may indicate an opportunity to
-** improvement performance through careful use of indices.</dd>
-**
-** </dl>
-*/
-#define SQLITE_STMTSTATUS_FULLSCAN_STEP 1
-#define SQLITE_STMTSTATUS_SORT 2
-
-/*
-** CAPI3REF: Custom Page Cache Object
-** EXPERIMENTAL
-**
-** The sqlite3_pcache type is opaque. It is implemented by
-** the pluggable module. The SQLite core has no knowledge of
-** its size or internal structure and never deals with the
-** sqlite3_pcache object except by holding and passing pointers
-** to the object.
-**
-** See [sqlite3_pcache_methods] for additional information.
-*/
-typedef struct sqlite3_pcache sqlite3_pcache;
-
-/*
-** CAPI3REF: Application Defined Page Cache.
-** EXPERIMENTAL
-**
-** The [sqlite3_config]([SQLITE_CONFIG_PCACHE], ...) interface can
-** register an alternative page cache implementation by passing in an
-** instance of the sqlite3_pcache_methods structure. The majority of the
-** heap memory used by sqlite is used by the page cache to cache data read
-** from, or ready to be written to, the database file. By implementing a
-** custom page cache using this API, an application can control more
-** precisely the amount of memory consumed by sqlite, the way in which
-** said memory is allocated and released, and the policies used to
-** determine exactly which parts of a database file are cached and for
-** how long.
-**
-** The contents of the structure are copied to an internal buffer by sqlite
-** within the call to [sqlite3_config].
-**
-** The xInit() method is called once for each call to [sqlite3_initialize()]
-** (usually only once during the lifetime of the process). It is passed
-** a copy of the sqlite3_pcache_methods.pArg value. It can be used to set
-** up global structures and mutexes required by the custom page cache
-** implementation. The xShutdown() method is called from within
-** [sqlite3_shutdown()], if the application invokes this API. It can be used
-** to clean up any outstanding resources before process shutdown, if required.
-**
-** The xCreate() method is used to construct a new cache instance. The
-** first parameter, szPage, is the size in bytes of the pages that must
-** be allocated by the cache. szPage will not be a power of two. The
-** second argument, bPurgeable, is true if the cache being created will
-** be used to cache database pages read from a file stored on disk, or
-** false if it is used for an in-memory database. The cache implementation
-** does not have to do anything special based on the value of bPurgeable,
-** it is purely advisory.
-**
-** The xCachesize() method may be called at any time by SQLite to set the
-** suggested maximum cache-size (number of pages stored by) the cache
-** instance passed as the first argument. This is the value configured using
-** the SQLite "[PRAGMA cache_size]" command. As with the bPurgeable parameter,
-** the implementation is not required to do anything special with this
-** value, it is advisory only.
-**
-** The xPagecount() method should return the number of pages currently
-** stored in the cache supplied as an argument.
-**
-** The xFetch() method is used to fetch a page and return a pointer to it.
-** A 'page', in this context, is a buffer of szPage bytes aligned at an
-** 8-byte boundary. The page to be fetched is determined by the key. The
-** mimimum key value is 1. After it has been retrieved using xFetch, the page
-** is considered to be pinned.
-**
-** If the requested page is already in the page cache, then a pointer to
-** the cached buffer should be returned with its contents intact. If the
-** page is not already in the cache, then the expected behaviour of the
-** cache is determined by the value of the createFlag parameter passed
-** to xFetch, according to the following table:
-**
-** <table border=1 width=85% align=center>
-** <tr><th>createFlag<th>Expected Behaviour
-** <tr><td>0<td>NULL should be returned. No new cache entry is created.
-** <tr><td>1<td>If createFlag is set to 1, this indicates that
-** SQLite is holding pinned pages that can be unpinned
-** by writing their contents to the database file (a
-** relatively expensive operation). In this situation the
-** cache implementation has two choices: it can return NULL,
-** in which case SQLite will attempt to unpin one or more
-** pages before re-requesting the same page, or it can
-** allocate a new page and return a pointer to it. If a new
-** page is allocated, then the first sizeof(void*) bytes of
-** it (at least) must be zeroed before it is returned.
-** <tr><td>2<td>If createFlag is set to 2, then SQLite is not holding any
-** pinned pages associated with the specific cache passed
-** as the first argument to xFetch() that can be unpinned. The
-** cache implementation should attempt to allocate a new
-** cache entry and return a pointer to it. Again, the first
-** sizeof(void*) bytes of the page should be zeroed before
-** it is returned. If the xFetch() method returns NULL when
-** createFlag==2, SQLite assumes that a memory allocation
-** failed and returns SQLITE_NOMEM to the user.
-** </table>
-**
-** xUnpin() is called by SQLite with a pointer to a currently pinned page
-** as its second argument. If the third parameter, discard, is non-zero,
-** then the page should be evicted from the cache. In this case SQLite
-** assumes that the next time the page is retrieved from the cache using
-** the xFetch() method, it will be zeroed. If the discard parameter is
-** zero, then the page is considered to be unpinned. The cache implementation
-** may choose to reclaim (free or recycle) unpinned pages at any time.
-** SQLite assumes that next time the page is retrieved from the cache
-** it will either be zeroed, or contain the same data that it did when it
-** was unpinned.
-**
-** The cache is not required to perform any reference counting. A single
-** call to xUnpin() unpins the page regardless of the number of prior calls
-** to xFetch().
-**
-** The xRekey() method is used to change the key value associated with the
-** page passed as the second argument from oldKey to newKey. If the cache
-** previously contains an entry associated with newKey, it should be
-** discarded. Any prior cache entry associated with newKey is guaranteed not
-** to be pinned.
-**
-** When SQLite calls the xTruncate() method, the cache must discard all
-** existing cache entries with page numbers (keys) greater than or equal
-** to the value of the iLimit parameter passed to xTruncate(). If any
-** of these pages are pinned, they are implicitly unpinned, meaning that
-** they can be safely discarded.
-**
-** The xDestroy() method is used to delete a cache allocated by xCreate().
-** All resources associated with the specified cache should be freed. After
-** calling the xDestroy() method, SQLite considers the [sqlite3_pcache*]
-** handle invalid, and will not use it with any other sqlite3_pcache_methods
-** functions.
-*/
-typedef struct sqlite3_pcache_methods sqlite3_pcache_methods;
-struct sqlite3_pcache_methods {
- void *pArg;
- int (*xInit)(void*);
- void (*xShutdown)(void*);
- sqlite3_pcache *(*xCreate)(int szPage, int bPurgeable);
- void (*xCachesize)(sqlite3_pcache*, int nCachesize);
- int (*xPagecount)(sqlite3_pcache*);
- void *(*xFetch)(sqlite3_pcache*, unsigned key, int createFlag);
- void (*xUnpin)(sqlite3_pcache*, void*, int discard);
- void (*xRekey)(sqlite3_pcache*, void*, unsigned oldKey, unsigned newKey);
- void (*xTruncate)(sqlite3_pcache*, unsigned iLimit);
- void (*xDestroy)(sqlite3_pcache*);
-};
-
-/*
-** CAPI3REF: Online Backup Object
-** EXPERIMENTAL
-**
-** The sqlite3_backup object records state information about an ongoing
-** online backup operation. The sqlite3_backup object is created by
-** a call to [sqlite3_backup_init()] and is destroyed by a call to
-** [sqlite3_backup_finish()].
-**
-** See Also: [Using the SQLite Online Backup API]
-*/
-typedef struct sqlite3_backup sqlite3_backup;
-
-/*
-** CAPI3REF: Online Backup API.
-** EXPERIMENTAL
-**
-** This API is used to overwrite the contents of one database with that
-** of another. It is useful either for creating backups of databases or
-** for copying in-memory databases to or from persistent files.
-**
-** See Also: [Using the SQLite Online Backup API]
-**
-** Exclusive access is required to the destination database for the
-** duration of the operation. However the source database is only
-** read-locked while it is actually being read, it is not locked
-** continuously for the entire operation. Thus, the backup may be
-** performed on a live database without preventing other users from
-** writing to the database for an extended period of time.
-**
-** To perform a backup operation:
-** <ol>
-** <li><b>sqlite3_backup_init()</b> is called once to initialize the
-** backup,
-** <li><b>sqlite3_backup_step()</b> is called one or more times to transfer
-** the data between the two databases, and finally
-** <li><b>sqlite3_backup_finish()</b> is called to release all resources
-** associated with the backup operation.
-** </ol>
-** There should be exactly one call to sqlite3_backup_finish() for each
-** successful call to sqlite3_backup_init().
-**
-** <b>sqlite3_backup_init()</b>
-**
-** The first two arguments passed to [sqlite3_backup_init()] are the database
-** handle associated with the destination database and the database name
-** used to attach the destination database to the handle. The database name
-** is "main" for the main database, "temp" for the temporary database, or
-** the name specified as part of the [ATTACH] statement if the destination is
-** an attached database. The third and fourth arguments passed to
-** sqlite3_backup_init() identify the [database connection]
-** and database name used
-** to access the source database. The values passed for the source and
-** destination [database connection] parameters must not be the same.
-**
-** If an error occurs within sqlite3_backup_init(), then NULL is returned
-** and an error code and error message written into the [database connection]
-** passed as the first argument. They may be retrieved using the
-** [sqlite3_errcode()], [sqlite3_errmsg()], and [sqlite3_errmsg16()] functions.
-** Otherwise, if successful, a pointer to an [sqlite3_backup] object is
-** returned. This pointer may be used with the sqlite3_backup_step() and
-** sqlite3_backup_finish() functions to perform the specified backup
-** operation.
-**
-** <b>sqlite3_backup_step()</b>
-**
-** Function [sqlite3_backup_step()] is used to copy up to nPage pages between
-** the source and destination databases, where nPage is the value of the
-** second parameter passed to sqlite3_backup_step(). If nPage is a negative
-** value, all remaining source pages are copied. If the required pages are
-** succesfully copied, but there are still more pages to copy before the
-** backup is complete, it returns [SQLITE_OK]. If no error occured and there
-** are no more pages to copy, then [SQLITE_DONE] is returned. If an error
-** occurs, then an SQLite error code is returned. As well as [SQLITE_OK] and
-** [SQLITE_DONE], a call to sqlite3_backup_step() may return [SQLITE_READONLY],
-** [SQLITE_NOMEM], [SQLITE_BUSY], [SQLITE_LOCKED], or an
-** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX] extended error code.
-**
-** As well as the case where the destination database file was opened for
-** read-only access, sqlite3_backup_step() may return [SQLITE_READONLY] if
-** the destination is an in-memory database with a different page size
-** from the source database.
-**
-** If sqlite3_backup_step() cannot obtain a required file-system lock, then
-** the [sqlite3_busy_handler | busy-handler function]
-** is invoked (if one is specified). If the
-** busy-handler returns non-zero before the lock is available, then
-** [SQLITE_BUSY] is returned to the caller. In this case the call to
-** sqlite3_backup_step() can be retried later. If the source
-** [database connection]
-** is being used to write to the source database when sqlite3_backup_step()
-** is called, then [SQLITE_LOCKED] is returned immediately. Again, in this
-** case the call to sqlite3_backup_step() can be retried later on. If
-** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX], [SQLITE_NOMEM], or
-** [SQLITE_READONLY] is returned, then
-** there is no point in retrying the call to sqlite3_backup_step(). These
-** errors are considered fatal. At this point the application must accept
-** that the backup operation has failed and pass the backup operation handle
-** to the sqlite3_backup_finish() to release associated resources.
-**
-** Following the first call to sqlite3_backup_step(), an exclusive lock is
-** obtained on the destination file. It is not released until either
-** sqlite3_backup_finish() is called or the backup operation is complete
-** and sqlite3_backup_step() returns [SQLITE_DONE]. Additionally, each time
-** a call to sqlite3_backup_step() is made a [shared lock] is obtained on
-** the source database file. This lock is released before the
-** sqlite3_backup_step() call returns. Because the source database is not
-** locked between calls to sqlite3_backup_step(), it may be modified mid-way
-** through the backup procedure. If the source database is modified by an
-** external process or via a database connection other than the one being
-** used by the backup operation, then the backup will be transparently
-** restarted by the next call to sqlite3_backup_step(). If the source
-** database is modified by the using the same database connection as is used
-** by the backup operation, then the backup database is transparently
-** updated at the same time.
-**
-** <b>sqlite3_backup_finish()</b>
-**
-** Once sqlite3_backup_step() has returned [SQLITE_DONE], or when the
-** application wishes to abandon the backup operation, the [sqlite3_backup]
-** object should be passed to sqlite3_backup_finish(). This releases all
-** resources associated with the backup operation. If sqlite3_backup_step()
-** has not yet returned [SQLITE_DONE], then any active write-transaction on the
-** destination database is rolled back. The [sqlite3_backup] object is invalid
-** and may not be used following a call to sqlite3_backup_finish().
-**
-** The value returned by sqlite3_backup_finish is [SQLITE_OK] if no error
-** occurred, regardless or whether or not sqlite3_backup_step() was called
-** a sufficient number of times to complete the backup operation. Or, if
-** an out-of-memory condition or IO error occured during a call to
-** sqlite3_backup_step() then [SQLITE_NOMEM] or an
-** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX] error code
-** is returned. In this case the error code and an error message are
-** written to the destination [database connection].
-**
-** A return of [SQLITE_BUSY] or [SQLITE_LOCKED] from sqlite3_backup_step() is
-** not a permanent error and does not affect the return value of
-** sqlite3_backup_finish().
-**
-** <b>sqlite3_backup_remaining(), sqlite3_backup_pagecount()</b>
-**
-** Each call to sqlite3_backup_step() sets two values stored internally
-** by an [sqlite3_backup] object. The number of pages still to be backed
-** up, which may be queried by sqlite3_backup_remaining(), and the total
-** number of pages in the source database file, which may be queried by
-** sqlite3_backup_pagecount().
-**
-** The values returned by these functions are only updated by
-** sqlite3_backup_step(). If the source database is modified during a backup
-** operation, then the values are not updated to account for any extra
-** pages that need to be updated or the size of the source database file
-** changing.
-**
-** <b>Concurrent Usage of Database Handles</b>
-**
-** The source [database connection] may be used by the application for other
-** purposes while a backup operation is underway or being initialized.
-** If SQLite is compiled and configured to support threadsafe database
-** connections, then the source database connection may be used concurrently
-** from within other threads.
-**
-** However, the application must guarantee that the destination database
-** connection handle is not passed to any other API (by any thread) after
-** sqlite3_backup_init() is called and before the corresponding call to
-** sqlite3_backup_finish(). Unfortunately SQLite does not currently check
-** for this, if the application does use the destination [database connection]
-** for some other purpose during a backup operation, things may appear to
-** work correctly but in fact be subtly malfunctioning. Use of the
-** destination database connection while a backup is in progress might
-** also cause a mutex deadlock.
-**
-** Furthermore, if running in [shared cache mode], the application must
-** guarantee that the shared cache used by the destination database
-** is not accessed while the backup is running. In practice this means
-** that the application must guarantee that the file-system file being
-** backed up to is not accessed by any connection within the process,
-** not just the specific connection that was passed to sqlite3_backup_init().
-**
-** The [sqlite3_backup] object itself is partially threadsafe. Multiple
-** threads may safely make multiple concurrent calls to sqlite3_backup_step().
-** However, the sqlite3_backup_remaining() and sqlite3_backup_pagecount()
-** APIs are not strictly speaking threadsafe. If they are invoked at the
-** same time as another thread is invoking sqlite3_backup_step() it is
-** possible that they return invalid values.
-*/
-sqlite3_backup *sqlite3_backup_init(
- sqlite3 *pDest, /* Destination database handle */
- const char *zDestName, /* Destination database name */
- sqlite3 *pSource, /* Source database handle */
- const char *zSourceName /* Source database name */
-);
-int sqlite3_backup_step(sqlite3_backup *p, int nPage);
-int sqlite3_backup_finish(sqlite3_backup *p);
-int sqlite3_backup_remaining(sqlite3_backup *p);
-int sqlite3_backup_pagecount(sqlite3_backup *p);
-
-/*
-** CAPI3REF: Unlock Notification
-** EXPERIMENTAL
-**
-** When running in shared-cache mode, a database operation may fail with
-** an [SQLITE_LOCKED] error if the required locks on the shared-cache or
-** individual tables within the shared-cache cannot be obtained. See
-** [SQLite Shared-Cache Mode] for a description of shared-cache locking.
-** This API may be used to register a callback that SQLite will invoke
-** when the connection currently holding the required lock relinquishes it.
-** This API is only available if the library was compiled with the
-** [SQLITE_ENABLE_UNLOCK_NOTIFY] C-preprocessor symbol defined.
-**
-** See Also: [Using the SQLite Unlock Notification Feature].
-**
-** Shared-cache locks are released when a database connection concludes
-** its current transaction, either by committing it or rolling it back.
-**
-** When a connection (known as the blocked connection) fails to obtain a
-** shared-cache lock and SQLITE_LOCKED is returned to the caller, the
-** identity of the database connection (the blocking connection) that
-** has locked the required resource is stored internally. After an
-** application receives an SQLITE_LOCKED error, it may call the
-** sqlite3_unlock_notify() method with the blocked connection handle as
-** the first argument to register for a callback that will be invoked
-** when the blocking connections current transaction is concluded. The
-** callback is invoked from within the [sqlite3_step] or [sqlite3_close]
-** call that concludes the blocking connections transaction.
-**
-** If sqlite3_unlock_notify() is called in a multi-threaded application,
-** there is a chance that the blocking connection will have already
-** concluded its transaction by the time sqlite3_unlock_notify() is invoked.
-** If this happens, then the specified callback is invoked immediately,
-** from within the call to sqlite3_unlock_notify().
-**
-** If the blocked connection is attempting to obtain a write-lock on a
-** shared-cache table, and more than one other connection currently holds
-** a read-lock on the same table, then SQLite arbitrarily selects one of
-** the other connections to use as the blocking connection.
-**
-** There may be at most one unlock-notify callback registered by a
-** blocked connection. If sqlite3_unlock_notify() is called when the
-** blocked connection already has a registered unlock-notify callback,
-** then the new callback replaces the old. If sqlite3_unlock_notify() is
-** called with a NULL pointer as its second argument, then any existing
-** unlock-notify callback is cancelled. The blocked connections
-** unlock-notify callback may also be canceled by closing the blocked
-** connection using [sqlite3_close()].
-**
-** The unlock-notify callback is not reentrant. If an application invokes
-** any sqlite3_xxx API functions from within an unlock-notify callback, a
-** crash or deadlock may be the result.
-**
-** Unless deadlock is detected (see below), sqlite3_unlock_notify() always
-** returns SQLITE_OK.
-**
-** <b>Callback Invocation Details</b>
-**
-** When an unlock-notify callback is registered, the application provides a
-** single void* pointer that is passed to the callback when it is invoked.
-** However, the signature of the callback function allows SQLite to pass
-** it an array of void* context pointers. The first argument passed to
-** an unlock-notify callback is a pointer to an array of void* pointers,
-** and the second is the number of entries in the array.
-**
-** When a blocking connections transaction is concluded, there may be
-** more than one blocked connection that has registered for an unlock-notify
-** callback. If two or more such blocked connections have specified the
-** same callback function, then instead of invoking the callback function
-** multiple times, it is invoked once with the set of void* context pointers
-** specified by the blocked connections bundled together into an array.
-** This gives the application an opportunity to prioritize any actions
-** related to the set of unblocked database connections.
-**
-** <b>Deadlock Detection</b>
-**
-** Assuming that after registering for an unlock-notify callback a
-** database waits for the callback to be issued before taking any further
-** action (a reasonable assumption), then using this API may cause the
-** application to deadlock. For example, if connection X is waiting for
-** connection Y's transaction to be concluded, and similarly connection
-** Y is waiting on connection X's transaction, then neither connection
-** will proceed and the system may remain deadlocked indefinitely.
-**
-** To avoid this scenario, the sqlite3_unlock_notify() performs deadlock
-** detection. If a given call to sqlite3_unlock_notify() would put the
-** system in a deadlocked state, then SQLITE_LOCKED is returned and no
-** unlock-notify callback is registered. The system is said to be in
-** a deadlocked state if connection A has registered for an unlock-notify
-** callback on the conclusion of connection B's transaction, and connection
-** B has itself registered for an unlock-notify callback when connection
-** A's transaction is concluded. Indirect deadlock is also detected, so
-** the system is also considered to be deadlocked if connection B has
-** registered for an unlock-notify callback on the conclusion of connection
-** C's transaction, where connection C is waiting on connection A. Any
-** number of levels of indirection are allowed.
-**
-** <b>The "DROP TABLE" Exception</b>
-**
-** When a call to [sqlite3_step()] returns SQLITE_LOCKED, it is almost
-** always appropriate to call sqlite3_unlock_notify(). There is however,
-** one exception. When executing a "DROP TABLE" or "DROP INDEX" statement,
-** SQLite checks if there are any currently executing SELECT statements
-** that belong to the same connection. If there are, SQLITE_LOCKED is
-** returned. In this case there is no "blocking connection", so invoking
-** sqlite3_unlock_notify() results in the unlock-notify callback being
-** invoked immediately. If the application then re-attempts the "DROP TABLE"
-** or "DROP INDEX" query, an infinite loop might be the result.
-**
-** One way around this problem is to check the extended error code returned
-** by an sqlite3_step() call. If there is a blocking connection, then the
-** extended error code is set to SQLITE_LOCKED_SHAREDCACHE. Otherwise, in
-** the special "DROP TABLE/INDEX" case, the extended error code is just
-** SQLITE_LOCKED.
-*/
-int sqlite3_unlock_notify(
- sqlite3 *pBlocked, /* Waiting connection */
- void (*xNotify)(void **apArg, int nArg), /* Callback function to invoke */
- void *pNotifyArg /* Argument to pass to xNotify */
-);
-
-/*
-** Undo the hack that converts floating point types to integer for
-** builds on processors without floating point support.
-*/
-#ifdef SQLITE_OMIT_FLOATING_POINT
-# undef double
-#endif
-
-#ifdef __cplusplus
-} /* End of the 'extern "C"' block */
-#endif
-#endif