summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat (limited to '3rdParty/LibIDN/src/punycode.c')
m---------3rdParty/LibIDN0
-rw-r--r--3rdParty/LibIDN/src/punycode.c456
2 files changed, 0 insertions, 456 deletions
diff --git a/3rdParty/LibIDN b/3rdParty/LibIDN
new file mode 160000
+Subproject 5a4274b7eb5923c2b8e6c1aee279a47c8e05662
diff --git a/3rdParty/LibIDN/src/punycode.c b/3rdParty/LibIDN/src/punycode.c
deleted file mode 100644
index 36ffee0..0000000
--- a/3rdParty/LibIDN/src/punycode.c
+++ /dev/null
@@ -1,456 +0,0 @@
-/* punycode.c --- Implementation of punycode used to ASCII encode IDN's.
- * Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007 Simon Josefsson
- *
- * This file is part of GNU Libidn.
- *
- * GNU Libidn is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * GNU Libidn is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with GNU Libidn; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
- *
- */
-
-/*
- * This file is derived from RFC 3492bis written by Adam M. Costello.
- *
- * Disclaimer and license: Regarding this entire document or any
- * portion of it (including the pseudocode and C code), the author
- * makes no guarantees and is not responsible for any damage resulting
- * from its use. The author grants irrevocable permission to anyone
- * to use, modify, and distribute it in any way that does not diminish
- * the rights of anyone else to use, modify, and distribute it,
- * provided that redistributed derivative works do not contain
- * misleading author or version information. Derivative works need
- * not be licensed under similar terms.
- *
- * Copyright (C) The Internet Society (2003). All Rights Reserved.
- *
- * This document and translations of it may be copied and furnished to
- * others, and derivative works that comment on or otherwise explain it
- * or assist in its implementation may be prepared, copied, published
- * and distributed, in whole or in part, without restriction of any
- * kind, provided that the above copyright notice and this paragraph are
- * included on all such copies and derivative works. However, this
- * document itself may not be modified in any way, such as by removing
- * the copyright notice or references to the Internet Society or other
- * Internet organizations, except as needed for the purpose of
- * developing Internet standards in which case the procedures for
- * copyrights defined in the Internet Standards process must be
- * followed, or as required to translate it into languages other than
- * English.
- *
- * The limited permissions granted above are perpetual and will not be
- * revoked by the Internet Society or its successors or assigns.
- *
- * This document and the information contained herein is provided on an
- * "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
- * TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
- * BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
- * HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#include <string.h>
-
-#include "punycode.h"
-
-/*** Bootstring parameters for Punycode ***/
-
-enum
-{ base = 36, tmin = 1, tmax = 26, skew = 38, damp = 700,
- initial_bias = 72, initial_n = 0x80, delimiter = 0x2D
-};
-
-/* basic(cp) tests whether cp is a basic code point: */
-#define basic(cp) ((punycode_uint)(cp) < 0x80)
-
-/* delim(cp) tests whether cp is a delimiter: */
-#define delim(cp) ((cp) == delimiter)
-
-/* decode_digit(cp) returns the numeric value of a basic code */
-/* point (for use in representing integers) in the range 0 to */
-/* base-1, or base if cp does not represent a value. */
-
-static punycode_uint
-decode_digit (punycode_uint cp)
-{
- return cp - 48 < 10 ? cp - 22 : cp - 65 < 26 ? cp - 65 :
- cp - 97 < 26 ? cp - 97 : base;
-}
-
-/* encode_digit(d,flag) returns the basic code point whose value */
-/* (when used for representing integers) is d, which needs to be in */
-/* the range 0 to base-1. The lowercase form is used unless flag is */
-/* nonzero, in which case the uppercase form is used. The behavior */
-/* is undefined if flag is nonzero and digit d has no uppercase form. */
-
-static char
-encode_digit (punycode_uint d, int flag)
-{
- return d + 22 + 75 * (d < 26) - ((flag != 0) << 5);
- /* 0..25 map to ASCII a..z or A..Z */
- /* 26..35 map to ASCII 0..9 */
-}
-
-/* flagged(bcp) tests whether a basic code point is flagged */
-/* (uppercase). The behavior is undefined if bcp is not a */
-/* basic code point. */
-
-#define flagged(bcp) ((punycode_uint)(bcp) - 65 < 26)
-
-/* encode_basic(bcp,flag) forces a basic code point to lowercase */
-/* if flag is zero, uppercase if flag is nonzero, and returns */
-/* the resulting code point. The code point is unchanged if it */
-/* is caseless. The behavior is undefined if bcp is not a basic */
-/* code point. */
-
-static char
-encode_basic (punycode_uint bcp, int flag)
-{
- bcp -= (bcp - 97 < 26) << 5;
- return bcp + ((!flag && (bcp - 65 < 26)) << 5);
-}
-
-/*** Platform-specific constants ***/
-
-/* maxint is the maximum value of a punycode_uint variable: */
-static const punycode_uint maxint = -1;
-/* Because maxint is unsigned, -1 becomes the maximum value. */
-
-/*** Bias adaptation function ***/
-
-static punycode_uint
-adapt (punycode_uint delta, punycode_uint numpoints, int firsttime)
-{
- punycode_uint k;
-
- delta = firsttime ? delta / damp : delta >> 1;
- /* delta >> 1 is a faster way of doing delta / 2 */
- delta += delta / numpoints;
-
- for (k = 0; delta > ((base - tmin) * tmax) / 2; k += base)
- {
- delta /= base - tmin;
- }
-
- return k + (base - tmin + 1) * delta / (delta + skew);
-}
-
-/*** Main encode function ***/
-
-/**
- * punycode_encode - encode Unicode to Punycode
- * @input_length: The number of code points in the @input array and
- * the number of flags in the @case_flags array.
- * @input: An array of code points. They are presumed to be Unicode
- * code points, but that is not strictly REQUIRED. The array
- * contains code points, not code units. UTF-16 uses code units
- * D800 through DFFF to refer to code points 10000..10FFFF. The
- * code points D800..DFFF do not occur in any valid Unicode string.
- * The code points that can occur in Unicode strings (0..D7FF and
- * E000..10FFFF) are also called Unicode scalar values.
- * @case_flags: A %NULL pointer or an array of boolean values parallel
- * to the @input array. Nonzero (true, flagged) suggests that the
- * corresponding Unicode character be forced to uppercase after
- * being decoded (if possible), and zero (false, unflagged) suggests
- * that it be forced to lowercase (if possible). ASCII code points
- * (0..7F) are encoded literally, except that ASCII letters are
- * forced to uppercase or lowercase according to the corresponding
- * case flags. If @case_flags is a %NULL pointer then ASCII letters
- * are left as they are, and other code points are treated as
- * unflagged.
- * @output_length: The caller passes in the maximum number of ASCII
- * code points that it can receive. On successful return it will
- * contain the number of ASCII code points actually output.
- * @output: An array of ASCII code points. It is *not*
- * null-terminated; it will contain zeros if and only if the @input
- * contains zeros. (Of course the caller can leave room for a
- * terminator and add one if needed.)
- *
- * Converts a sequence of code points (presumed to be Unicode code
- * points) to Punycode.
- *
- * Return value: The return value can be any of the #Punycode_status
- * values defined above except %PUNYCODE_BAD_INPUT. If not
- * %PUNYCODE_SUCCESS, then @output_size and @output might contain
- * garbage.
- **/
-int
-punycode_encode (size_t input_length,
- const punycode_uint input[],
- const unsigned char case_flags[],
- size_t * output_length, char output[])
-{
- punycode_uint input_len, n, delta, h, b, bias, j, m, q, k, t;
- size_t out, max_out;
-
- /* The Punycode spec assumes that the input length is the same type */
- /* of integer as a code point, so we need to convert the size_t to */
- /* a punycode_uint, which could overflow. */
-
- if (input_length > maxint)
- return punycode_overflow;
- input_len = (punycode_uint) input_length;
-
- /* Initialize the state: */
-
- n = initial_n;
- delta = 0;
- out = 0;
- max_out = *output_length;
- bias = initial_bias;
-
- /* Handle the basic code points: */
-
- for (j = 0; j < input_len; ++j)
- {
- if (basic (input[j]))
- {
- if (max_out - out < 2)
- return punycode_big_output;
- output[out++] = case_flags ?
- encode_basic (input[j], case_flags[j]) : (char) input[j];
- }
- /* else if (input[j] < n) return punycode_bad_input; */
- /* (not needed for Punycode with unsigned code points) */
- }
-
- h = b = (punycode_uint) out;
- /* cannot overflow because out <= input_len <= maxint */
-
- /* h is the number of code points that have been handled, b is the */
- /* number of basic code points, and out is the number of ASCII code */
- /* points that have been output. */
-
- if (b > 0)
- output[out++] = delimiter;
-
- /* Main encoding loop: */
-
- while (h < input_len)
- {
- /* All non-basic code points < n have been */
- /* handled already. Find the next larger one: */
-
- for (m = maxint, j = 0; j < input_len; ++j)
- {
- /* if (basic(input[j])) continue; */
- /* (not needed for Punycode) */
- if (input[j] >= n && input[j] < m)
- m = input[j];
- }
-
- /* Increase delta enough to advance the decoder's */
- /* <n,i> state to <m,0>, but guard against overflow: */
-
- if (m - n > (maxint - delta) / (h + 1))
- return punycode_overflow;
- delta += (m - n) * (h + 1);
- n = m;
-
- for (j = 0; j < input_len; ++j)
- {
- /* Punycode does not need to check whether input[j] is basic: */
- if (input[j] < n /* || basic(input[j]) */ )
- {
- if (++delta == 0)
- return punycode_overflow;
- }
-
- if (input[j] == n)
- {
- /* Represent delta as a generalized variable-length integer: */
-
- for (q = delta, k = base;; k += base)
- {
- if (out >= max_out)
- return punycode_big_output;
- t = k <= bias /* + tmin */ ? tmin : /* +tmin not needed */
- k >= bias + tmax ? tmax : k - bias;
- if (q < t)
- break;
- output[out++] = encode_digit (t + (q - t) % (base - t), 0);
- q = (q - t) / (base - t);
- }
-
- output[out++] = encode_digit (q, case_flags && case_flags[j]);
- bias = adapt (delta, h + 1, h == b);
- delta = 0;
- ++h;
- }
- }
-
- ++delta, ++n;
- }
-
- *output_length = out;
- return punycode_success;
-}
-
-/*** Main decode function ***/
-
-/**
- * punycode_decode - decode Punycode to Unicode
- * @input_length: The number of ASCII code points in the @input array.
- * @input: An array of ASCII code points (0..7F).
- * @output_length: The caller passes in the maximum number of code
- * points that it can receive into the @output array (which is also
- * the maximum number of flags that it can receive into the
- * @case_flags array, if @case_flags is not a %NULL pointer). On
- * successful return it will contain the number of code points
- * actually output (which is also the number of flags actually
- * output, if case_flags is not a null pointer). The decoder will
- * never need to output more code points than the number of ASCII
- * code points in the input, because of the way the encoding is
- * defined. The number of code points output cannot exceed the
- * maximum possible value of a punycode_uint, even if the supplied
- * @output_length is greater than that.
- * @output: An array of code points like the input argument of
- * punycode_encode() (see above).
- * @case_flags: A %NULL pointer (if the flags are not needed by the
- * caller) or an array of boolean values parallel to the @output
- * array. Nonzero (true, flagged) suggests that the corresponding
- * Unicode character be forced to uppercase by the caller (if
- * possible), and zero (false, unflagged) suggests that it be forced
- * to lowercase (if possible). ASCII code points (0..7F) are output
- * already in the proper case, but their flags will be set
- * appropriately so that applying the flags would be harmless.
- *
- * Converts Punycode to a sequence of code points (presumed to be
- * Unicode code points).
- *
- * Return value: The return value can be any of the #Punycode_status
- * values defined above. If not %PUNYCODE_SUCCESS, then
- * @output_length, @output, and @case_flags might contain garbage.
- *
- **/
-int
-punycode_decode (size_t input_length,
- const char input[],
- size_t * output_length,
- punycode_uint output[], unsigned char case_flags[])
-{
- punycode_uint n, out, i, max_out, bias, oldi, w, k, digit, t;
- size_t b, j, in;
-
- /* Initialize the state: */
-
- n = initial_n;
- out = i = 0;
- max_out = *output_length > maxint ? maxint
- : (punycode_uint) * output_length;
- bias = initial_bias;
-
- /* Handle the basic code points: Let b be the number of input code */
- /* points before the last delimiter, or 0 if there is none, then */
- /* copy the first b code points to the output. */
-
- for (b = j = 0; j < input_length; ++j)
- if (delim (input[j]))
- b = j;
- if (b > max_out)
- return punycode_big_output;
-
- for (j = 0; j < b; ++j)
- {
- if (case_flags)
- case_flags[out] = flagged (input[j]);
- if (!basic (input[j]))
- return punycode_bad_input;
- output[out++] = input[j];
- }
-
- /* Main decoding loop: Start just after the last delimiter if any */
- /* basic code points were copied; start at the beginning otherwise. */
-
- for (in = b > 0 ? b + 1 : 0; in < input_length; ++out)
- {
-
- /* in is the index of the next ASCII code point to be consumed, */
- /* and out is the number of code points in the output array. */
-
- /* Decode a generalized variable-length integer into delta, */
- /* which gets added to i. The overflow checking is easier */
- /* if we increase i as we go, then subtract off its starting */
- /* value at the end to obtain delta. */
-
- for (oldi = i, w = 1, k = base;; k += base)
- {
- if (in >= input_length)
- return punycode_bad_input;
- digit = decode_digit (input[in++]);
- if (digit >= base)
- return punycode_bad_input;
- if (digit > (maxint - i) / w)
- return punycode_overflow;
- i += digit * w;
- t = k <= bias /* + tmin */ ? tmin : /* +tmin not needed */
- k >= bias + tmax ? tmax : k - bias;
- if (digit < t)
- break;
- if (w > maxint / (base - t))
- return punycode_overflow;
- w *= (base - t);
- }
-
- bias = adapt (i - oldi, out + 1, oldi == 0);
-
- /* i was supposed to wrap around from out+1 to 0, */
- /* incrementing n each time, so we'll fix that now: */
-
- if (i / (out + 1) > maxint - n)
- return punycode_overflow;
- n += i / (out + 1);
- i %= (out + 1);
-
- /* Insert n at position i of the output: */
-
- /* not needed for Punycode: */
- /* if (basic(n)) return punycode_invalid_input; */
- if (out >= max_out)
- return punycode_big_output;
-
- if (case_flags)
- {
- memmove (case_flags + i + 1, case_flags + i, out - i);
- /* Case of last ASCII code point determines case flag: */
- case_flags[i] = flagged (input[in - 1]);
- }
-
- memmove (output + i + 1, output + i, (out - i) * sizeof *output);
- output[i++] = n;
- }
-
- *output_length = (size_t) out;
- /* cannot overflow because out <= old value of *output_length */
- return punycode_success;
-}
-
-/**
- * punycode_uint
- *
- * Unicode code point data type, this is always a 32 bit unsigned
- * integer.
- */
-
-/**
- * Punycode_status
- * @PUNYCODE_SUCCESS: Successful operation. This value is guaranteed
- * to always be zero, the remaining ones are only guaranteed to hold
- * non-zero values, for logical comparison purposes.
- * @PUNYCODE_BAD_INPUT: Input is invalid.
- * @PUNYCODE_BIG_OUTPUT: Output would exceed the space provided.
- * @PUNYCODE_OVERFLOW: Input needs wider integers to process.
- *
- * Enumerated return codes of punycode_encode() and punycode_decode().
- * The value 0 is guaranteed to always correspond to success.
- */