5 files changed, 0 insertions, 248 deletions
diff --git a/Documentation/BuildingGenerics.txt b/Documentation/BuildingGenerics.txt
deleted file mode 100644
index 284cf45..0000000
--- a/Documentation/BuildingGenerics.txt
+++ /dev/null
@@ -1,6 +0,0 @@
-To cause scons to search for dependencies instead of using cached results, add force-configure=1 to the commandline:
-scons force-configure=1
-
-Swift is usually built with Qt5. If you want to build it against Qt4, add the line
-qt5 = 0
-to your config.py. However, Qt4 support is no longer actively maintained.
diff --git a/Documentation/BuildingOnAndroid.txt b/Documentation/BuildingOnAndroid.txt
deleted file mode 100644
index 8a29895..0000000
--- a/Documentation/BuildingOnAndroid.txt
+++ /dev/null
@@ -1,97 +0,0 @@
-Prerequisites
--------------
-- Android SDK
-- Android NDK
-- Python
-- Other requirements that are obtained during this guide
-  - LDNS
-  - Unbound
-  - OpenSSL
-
-Supported Components
---------------------
-- Swiften
-  Note: File-transfer support has not been tested on Android. Link-local features are not supported under Android.
-
-Supported Android NDK Level
----------------------------
-The minimal supported Android NDK API level is 14 (see --platform parameter of make-standalone-toolchain.sh).
-This is the NDK API level associated with Android 4.0. Higher Android NDK API levels however should work.
-
-Preparation of Build Environment
---------------------------------
-1. Fetch 3rd-party dependencies
-
-1.1 LDNS
-    cd 3rdParty/Ldns
-    bash prepare_ldns.sh
-
-1.2 Unbound
-    cd 3rdParty/Unbound
-    bash prepare_unbound.sh
-
-1.3 OpenSSL
-    cd 3rdParty/OpenSSL
-    curl -O http://www.openssl.org/source/openssl-1.0.1j.tar.gz
-    tar -xf openssl-1.0.1j.tar.gz
-    mv openssl-1.0.1j openssl
-
-2. Patch 3rd-party dependencies
-    patch -p0 < 3rdParty/Ldns/01_andoird_compilation_fixes.diff
-    patch -p1 < 3rdParty/LibMiniUPnPc/01_android_compilation_fixes.diff
-    patch -p1 < 3rdParty/Unbound/01_android_fixes.diff
-
-3. Create Android NDK Toolchain
-  cd $ANDROID_NDK_ROOT (this is the folder where you extracted Android NDK)
-  bash ./build/tools/make-standalone-toolchain.sh --platform=android-14 --install-dir=$HOME/android-14-tc
-
-Configuring Swift Build
------------------------
-1. Set config.py to (probably other paths, replace $NDK_TOOLCHAIN_INSTALL_DIR with the expanded path of the install dir used in the previous step):
-  > android_toolchain=$NDK_TOOLCHAIN_INSTALL_DIR
-  > android_sdk_bin="/usr/local/bin"
-  > target = "android"
-  > unbound = 1
-
-Building
---------
-./scons test=none Swiften Swift/Controllers QA max_jobs=1
-
-Testing
--------
-Running Swift's test suite on Android requires a one time preparation of a testing environment.
-This creates an Android VM where the test will be deployed to and run on.
-
-1. Preparation of test environment (one time)
-
-1.1 Starting AVD (Android Device Manager)
-  android avd
-
-1.2 Create a test VM
-  Click "Create..." button
-
-1.3 Fill out dialog
-  AVD Name: swift_test
-  Device: Nexus 4
-  Target: Anything with API level equal or greater than your toolchain you build
-  CPU/ABI: ARM (unless you build a different toolchain)
-
-  Click "Ok" button
-
-1.4 Close AVD
-
-2. Running integration and unit tests
-
-To run the unit tests you need to have an Android VM running while the test suite is running.
-This requires to leave the command under step 2.1 running while you execute step 2.2.
-
-Running the test suite on Android can take quite some time ( >30 minutes ) compared to a native run.
-This is due to
-  a) the slow transfer speed from host machine to VM (~ 2 MB/s) and
-  b) the test environment being emulated for an different CPU architecture.
-
-2.1 Start Android VM with resized /system partition
-  emulator -partition-size 2048 @swift_test
-
-2.2 Run integration and unit tests (wait until the android boot screen is gone)
-  env SWIFT_CLIENTTEST_JID="some jabber id" SWIFT_CLIENTTEST_PASS="password for the jabber id" ./scons test=all Swiften Swift/Controllers QA
diff --git a/Documentation/BuildingOnIOS.txt b/Documentation/BuildingOnIOS.txt
deleted file mode 100644
index e310ca1..0000000
--- a/Documentation/BuildingOnIOS.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-Prerequisites
-------------
-- XCode
-- Python
-- Other requirements that are obtained during this guide
-  - OpenSSL
-
-Supported Components
---------------------
-- Swiften
-  Note: File-transfer support has not been tested on iOS. Link-local features are not supported under iOS.
-- Swift/Controllers
-
-Preparation of Build Environment
---------------------------------
-1. Fetch 3rd-party dependencies
-
-1.1 OpenSSL
-    cd 3rdParty/OpenSSL
-    curl -O http://www.openssl.org/source/openssl-1.0.1j.tar.gz
-    tar -xf openssl-1.0.1j.tar.gz
-    mv openssl-1.0.1j openssl
-
-Building
---------
-1. Switch to iOS directory
-  cd BuildTools/IOS
-
-2. Look up installed SDKs
-  xcodebuild -showsdks
-
-  Note: Here the iOS SDKs and iOS Simulator SDKs are of interest.
-
-3. Build Swiften (adjust the sdk parameter to one of the installed SDKs)
-  xcodebuild build -arch i386 -sdk iphonesimulator8.1
-
-  Note: When not specifying the architecture (-arch flag) XCode will try an universal build which is not supported.
-        Only specify one architecture at a time and if you require a universal lib you can create one using the lipo tool.
-
-4. The final libSwiften.a is located at $SWIFT/build/current/Swiften/libSwiften.a.
-
-Testing
--------
-Integration and unit tests are not supported on iOS.
diff --git a/Documentation/BuildingOnUnix.txt b/Documentation/BuildingOnUnix.txt
deleted file mode 100644
index b9f31ea..0000000
--- a/Documentation/BuildingOnUnix.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-Prerequisites
-------------
-- GCC
-- Python
-- OpenSSL (and development package)
-- Qt Open Source Edition (and development package. Optional; not needed for Swiften)
-
-Building
---------
-- Swift uses Qt5 for the UI and on Unix-like platforms it is automatically detected
-  using pkg-config.
-  - The dependencies can be installed by running ./BuildTools/InstallSwiftDependencies.sh
-- Run 
-		./scons
-- To build only a subdir, add the path as a target to scons. E.g., for Swift:
-		./scons Swift
-
-Running tests
--------------
-If you want to run the unit tests (only interesting if you're doing development work)
-- Run
-		./scons test=unit
-	for running the unit tests.
-
-Installing
-----------
-- To install swift in /usr/local, run
-		./scons SWIFT_INSTALLDIR=/usr/local /usr/local
-
-Swiften-only
-------------
-- To compile just Swiften, add Swiften to the end of the scons command
-		./scons Swiften
-- To compile and install only Swiften, use SWIFTEN_INSTALLDIR
-		./scons SWIFTEN_INSTALLDIR=/usr/local /usr/local
diff --git a/Documentation/BuildingOnWindows.txt b/Documentation/BuildingOnWindows.txt
deleted file mode 100644
index d296241..0000000
--- a/Documentation/BuildingOnWindows.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Prerequisites
-------------
-- Microsoft Visual C++ Express Edition
-- Windows SDK
-- Python (2.5 <= version < 3)
-- OpenSSL
-  * OpenSSL is optional - without it the Windows platform crypto will be used
-  * Download and extract the Windows binary version of OpenSSL from
-    http://www.slproweb.com/products/Win32OpenSSL.html
-- Qt Open Source Edition (optional; not needed for Swiften)
-
-Building Qt for Microsoft Visual C++
-------------------------------------
-- These steps are optional - the pre-packaged Qt is fine
-- From the 'Visual C++' 'Programs' group, launch the Visual C++ command prompt
-- Go to the dir where you installed Qt
-- Configure Qt:
-    configure
-- Build Qt:
-    nmake
-
-Building Swift
---------------
-- From the 'Visual C++' 'Programs' group, launch the Visual C++ command prompt
-- Go to the Swift source dir
-- Create a file 'config.py' with the following contents, reflecting your local
-  setup:
-		openssl = "path\to\openssl" #optional
-		qt = "path\to\qt"
-- Run 'scons'
-- To build only a subdir, add the path as a target to scons. E.g., for Swift:
-		scons Swift
-
-Running tests
--------------
-- Run
-		scons test=unit
-	for running the unit tests, or
-		scons test=all
-	for running all tests.
-
-Packaging Swift
----------------
-For packaging use:
-- Microsoft Visual C++ Express 2008 or Microsoft VS 2013 Express 
-- No OpenSSL
-- WiX
-- Download the C++ redistributable package from Microsoft and put it at C:\Program Files (x86)\Common Files\Merge Modules\
-- config.py should contain:
-		qt = "c:\\qt\\5.4.2"
-		vcredist = "C:\\Program Files (x86)\\Common Files\\Merge Modules\\vcredist_x86.exe"
-		debug = 1
-		optimize = 1
-		wix_bindir = "c:\\program files\\Windows Installer XML v3.5\\bin"
-- run the following commands. Two scons runs are required as 'scons dist=1' requires the Swift.exe to be in place.
-		scons
-		scons dist=1
-
-Notes
------
-- The settings debug = 1 and optimize = 1 are strictly required if you use 
-  a precompiled Qt release from the Qt Project; otherwise you will get linker 
-  errors
-- On 64-bit Windows it's "Program Files (x86)" instead of "Program Files" in the
-  paths
-- Currently only 32-bit builds of the Swift client are supported